This is mainly to solve the weird check-hole where passing CKPROGS/
CKREADS as mount flags has no effect on lfsr_format (I mean, it'd be a
bit silly if it did somehow):
LFS_F_RDWR 0 // Format the filesystem as read and write
LFS_F_CKPROGS 0x00000010 // Check progs by reading back progged data
LFS_F_CKREADS 0x00000020 // Check reads via parity bits/checksums
This makes lfsr_format a more cumbersome interface, but I don't know if
this is necessarily a bad thing. There's always risk of data loss when
calling lfsr_format, so maybe it should be a pain to call.
At the very least, format flags may be useful in the future for
enabling/disabling format-time things such as the planned block-map,
parity-tree, etc. Though it's unclear if such significant settings
should be format flags or somehow encoded as fields in our config
struct.
---
The LFS_F_* format flags of course ended up conflicting with our
internal LFS_F_* flags, so I renamed most of the internal flags to match
the closest flag set they participate in:
- LFS_F_TYPE -> LFS_O_TYPE
- LFS_F_UNFLUSH -> LFS_O_UNFLUSH
- LFS_F_UNSYNC -> LFS_O_UNSYNC
- LFS_F_ORPHAN -> LFS_O_ORPHAN
- LFS_F_ZOMBIE -> LFS_O_ZOMBIE
- LFS_F_ORPHANS -> LFS_I_ORPHANS
- LFS_F_UNCOMPACTED -> LFS_I_UNCOMPACTED
- LFS_F_TSTATE -> LFS_T_TSTATE
- LFS_F_BTYPE -> LFS_T_BTYPE
- LFS_F_DIRTY -> LFS_T_DIRTY
- LFS_F_MUTATED -> LFS_T_MUTATED
This may make it a bit less clear which flags are a part of the public
API, vs intended only for internal use, but at the very least our asserts
in format/mount/open/etc should catch most of these mistakes.
---
Code cost ended up being pretty minimal. Actually negative. This is the
second time we're _adding_ a feature that somehow saves code, though the
reality for this one is we're really just pushing constants up into the
user's stack frame. Still, it's a good indication the cost of format
flags is small:
code stack
before: 36452 2680
after: 36448 (-0.0%) 2680 (+0.0%)
This has been a long-time coming, mount flags are just too useful for
configuring a filesystem at runtime.
Currently this is limited to LFS_M_RDONLY and LFS_M_CKPROGS, but there
are a few more planned in the future:
LFS_M_RDWR = 0x0000, // Mount the filesystem as read and write
LFS_M_RDONLY = 0x0001, // Mount the filesystem as readonly
LFS_M_STRICT* = 0x0002, // Error if on-disk config does not match
LFS_M_FORCE* = 0x0004, // Ignore compat flags, mount readonly
LFS_M_FORCEWITHRECKLESSABANDON*
= 0x0008, // Ignore compat flags, mount read write
LFS_M_CKPROGS = 0x0010, // Check progs by reading back progged data
LFS_M_CKREADS* = 0x0020, // Check reads via checksums
* Hypothetical
As a convenience, we also return mount flags in the struct lfs_fsinfo's
flags field as their relevant LFS_I_* variants. Though only to match
statvfs, and only because it's cheap, littlefs's API is low-level and we
should expect users to know what flags they passed to lfsr_mount.
As for the new mount flags:
- LFS_M_RDONLY - For consistency with existing APIs, this just asserts
on write operations, which makes it a bit useless... But the info flag
LFS_I_RDONLY may be useful for falling back to a readonly mode if
we encounter on-disk compat issues.
At least if implement the theoretical LFS_UNTRUSTED_USER mode
LFS_M_RDONLY could become a runtime error.
- LFS_M_RDWR - This really just exists to compliment LFS_M_RDONLY and to
match LFS_O_RDONLY/LFS_O_RDWR. It's just an alias for 0, and I don't
think there will ever be a reason to make it non-0 (but I can always
be wrong!).
- LFS_M_CKPROGS - This replaces the check_progs config option and avoids
using a full byte to store a bool.
We should probably also have a compile-time option to compile this out
(LFS_NO_CKPROGS?), but that's a future thing to do.
This ended up adding a surprising bit of code, considering we're just
moving flags around, and noise in lfs_alloc added a bit of stack again:
code stack
before: 35880 2672
after: 35932 (+0.1%) 2680 (+0.3%)
This simplification comes from the observation that we don't actually
need to know the bookmark's mid to know if a given operation is in a
dir's range, just the dir's did. And since dids are immutable, we don't
need another opened-list entry or other shenanigans.
A dir's did is a bit harder to access, requiring a name lookup, but we
conveniently already fetch these in all relevant functions as a part of
path resolution.
This does mean more opened-list logic in the high-level functions:
function can zombie can create can remove
lfsr_mkdir y y n
lfsr_rename y y y
lfsr_remove y n y
lfsr_file_opencfg y y n
But I think this actually results in better code readability, since the
opened-list logic and high-level logic are closely related. I went ahead
and lifted the similar orphan/zombie opened-list logic up to this level
for this reason.
Unfortunately lifting this logic does result in a higher code cost, but
I think this is worth it for better readability and a significantly
reduced RAM cost for lfsr_dir_ts. Keep in mind these will probably
become very common for the future planned openat/*at functions:
code stack lfsr_dir_t
before: 33402 2632 80
after: 33582 (+0.5%) 2632 (+0.0%) 44 (-45.0%)
Also added a new test case, test_dread_read_rm_remkdir, to catch the
mistake of thinking the did is unique even when the dir is removed,
since that is now a concern.
The main idea here is that diverse tests are better than many similar
tests.
Sure, if we throw fuzz tests at the system all day we'll eventually find
more bugs, but if a developer is in the loop that time is going to be
better spent writing specific tests targeting the fragile parts of the
system.
And don't worry, we can still throw fuzz tests at the system all day by
specifying explicit seeds with -DSEED=blah.
Changes:
- Limited dir-related powerloss fuzz testing to N <= 16.
These tests were the biggest culprit of excessive test runtime,
requiring O(n^2) redundant operations to recover from powerlosses
(they just replay the full sequence on powerloss).
- As a tradeoff, bumped most fuzz tests to a minimum of 20 seeds.
The big exception being the test_fwrite tests, which are heavily
parameterized and already take the most time to run. Each parameter
combination also multiplies the effective number of seeds, so
increasing the number of base seeds will probably have diminishing
returns.
- Limited test_fwrite_reversed to SIZE <= 4*1024*CHUNK.
Writing a file backwards is just about the worst way you could write a
file, since all buffering/coalescing expect writes to eventually make
forward progress. On the flip side, because it's uncommon, writing a
file backwards is also a great way to find bugs. But at some point a
compromise needs to be made.
Impacted test runtimes:
case otime ntime dtime
test_btree_push_fuzz 0.3 0.5 +0.2 (+60.2%)
test_btree_push_sparse_fuzz 0.4 3.3 +2.9 (+720.4%)
test_btree_update_fuzz 0.4 0.9 +0.6 (+141.6%)
test_btree_update_sparse_fuzz 0.5 4.5 +4.1 (+857.4%)
test_btree_pop_fuzz 0.6 2.3 +1.7 (+314.7%)
test_btree_pop_sparse_fuzz 1.2 5.7 +4.4 (+356.2%)
test_btree_split_fuzz 0.5 1.4 +0.8 (+150.2%)
test_btree_split_sparse_fuzz 0.4 5.6 +5.1 (+1163.2%)
test_btree_find_fuzz 0.5 0.7 +0.2 (+50.7%)
test_btree_find_sparse_fuzz 1.0 3.0 +2.0 (+189.8%)
test_btree_traversal_fuzz 0.6 2.3 +1.6 (+260.4%)
test_dirs_mkdir_many 3.3 2.1 -1.3 (-37.8%)
test_dirs_mkdir_many_backwards 3.5 2.1 -1.4 (-39.9%)
test_dirs_mkdir_fuzz 115.3 106.4 -8.9 (-7.7%)
test_dirs_rm_many 283.9 76.8 -207.0 (-72.9%)
test_dirs_rm_many_backwards 216.1 80.6 -135.5 (-62.7%)
test_dirs_rm_fuzz 647.0 68.5 -578.5 (-89.4%)
test_dirs_mv_many 14.2 15.4 +1.1 (+7.9%)
test_dirs_mv_many_backwards 16.5 14.5 -2.1 (-12.5%)
test_dirs_mv_fuzz 1932.5 156.7 -1775.8 (-91.9%)
test_dirs_general_fuzz 561.9 74.5 -487.4 (-86.7%)
test_dread_recursive_rm 336.6 46.2 -290.4 (-86.3%)
test_dread_recursive_mv 55.5 44.6 -11.0 (-19.8%)
test_fsync_rrrr_fuzz 0.4 0.3 -0.1 (-18.4%)
test_fsync_wrrr_fuzz 8.0 12.4 +4.5 (+56.0%)
test_fsync_wwww_fuzz 13.2 33.4 +20.2 (+152.6%)
test_fsync_wwrr_fuzz 5.4 50.9 +45.5 (+841.6%)
test_fsync_rwrw_fuzz 2.4 8.4 +6.0 (+253.9%)
test_fsync_rwrw_sparse_fuzz 3.2 7.5 +4.2 (+129.9%)
test_fsync_rwtfrwtf_sparse_fuzz 6.1 8.5 +2.4 (+39.3%)
test_fsync_drrr_fuzz 11.8 9.2 -2.6 (-21.8%)
test_fsync_wddd_fuzz 9.3 11.9 +2.6 (+28.0%)
test_fsync_rwdrwd_fuzz 1.6 33.1 +31.5 (+1963.4%)
test_fsync_rwdrwd_sparse_fuzz 0.3 1.8 +1.4 (+418.8%)
test_fsync_rwtfdrwtfd_sparse_fuzz 0.3 1.1 +0.8 (+260.2%)
test_fwrite_reversed 728.5 345.2 -383.3 (-52.6%)
TOTAL 7587.5 3792.3 -3795.2 (-50.0%)
So:
x = (cond) ? yes : no;
Where there are always parentheses around the condition, even if not
required for disambiguity. Additional parentheses are always allowed,
but the parenthesized condition helps signal that a ternary operator is
coming earlier in the expression.
This style has grown on me as I think it helps code readability. It
reminds me of the required parentheses for if/while statements.
Might as well adopt codebase-wide.
The size field in lfs_info doesn't really make sense for stat/dir_read
when the file is a directory. Still, we should probably set it to 0 os
it's not uninitialized.
Fortunately we were already setting size=0 in _most_ cases, this commit
is mostly just checking for size=0 in more test cases.
Christopher Haster