TLDR: This drops the idea of different bmap strategies/modes, and sorts
out most of the compile-time/runtime conditional bmap interactions.
---
Motivation: Benchmarking (at least up to the 32-bit word limit) has
shown the bmap will unlikely be a significant bottleneck, even on large
disks. The largest disks tend to be NAND, and NAND's ridiculous block
size limits pressure on block allocation.
There are still concerns for areas I haven't measured yet:
- SD/eMMC/FTL - Small blocks, so more pressure on block allocation. In
theory the logical block size can be artificially increased, but this
comes with a granularity tradeoff.
- I've only measured throughput, latency is a whole other story.
However, users have reported lfs3_fs_gc is useful for mitigating this,
so maybe latency is less of a concern now?
But while there may still be room for improvement via alternative bmap
strategies, the risk a concerning amount of complexity. Yes,
configuration gets more complicated, but the real issue is any bmap
strategies that try to track _deallocations_ (the original idea being
treediffing) risk falling leaking blocks if all cases aren't covered.
The current "bmap cache" strategy strikes a really nice balance where it
reduces _amortized_ block allocation -> ~O(log n) without RAM, while
retaining the safe, bug-resistant, single-source-of-truth properties
that come with lookahead-based allocation.
---
So, long story short, dropping other strategies, and now the presence of
the bmap is a boolean flag.
This is also the first format-specific flag:
- Define LFS3_BMAP to enable the bmap logic, but note by default the
bmap will still not be used.
- Define LFS3_YES_BMAP to force the bmap to be used.
- With LFS3_BMAP, passing LFS3_F_GBMAP to lfs3_format will include the
on-disk block-map.
- No flag is needed during mount, the presence of the bmap is determined
by the on-disk wcompat flags (LFS3_WCOMPAT_GBMAP). This also prevents
rw mounting if the bmap is not supported, but rdonly mounting is
allowed.
- Users can check if the bmap is in use via lfs3_fs_stat, which reports
LFS3_I_GBMAP in the flags field.
There's still some missing pieces, but these will be a bit more
involved:
- lfs3_fs_grow needs to be made bmap aware!
- We probably want something like lfs3_fs_mkgbmap and lfs3_fs_rmgbmap to
allow converting between bmap backed/not-backed filesystem images.
Code changes minimal:
code stack ctx
before: 37172 2352 684
after: 37172 (+0.0%) 2352 (+0.0%) 684 (+0.0%)
code stack ctx
bmap before: 38844 2456 800
bmap after: 38852 (+0.0%) 2456 (+0.0%) 800 (+0.0%)
Christopher Haster
9d322741ca