This fixes the overflowing left shift on 8 bit platforms.
littlefs2/lfs.c: In function ‘lfs_dir_commitcrc’:
littlefs2/lfs.c:1654:51: error: left shift count >= width of type [-Werror=shift-count-overflow]
commit->ptag = ntag ^ ((0x80 & ~eperturb) << 24);
lfs_fs_mkconsistent allows running the internal consistency operations
(desuperblock/deorphan/demove) on demand and without any other
filesystem changes.
This can be useful for front-loading and persisting consistency operations
when you don't want to pay for this cost on the first write to the
filesystem.
Conveniently, this also offers a way to force the on-disk minor version
to bump, if that is wanted behavior.
Idea from kasper0
The underlying issue is that lfs_fs_deorphan did not updating gstate
correctly. The way it determined if there are any orphans remaining in
the filesystem was by subtracting the number of found orphans from an
internal counter.
This internal counter is a leftover from a previous implementation that
allowed leaving the lfs_fs_deorphan loop early if we know the number of
expected orphans. This can happen during recursive mdir relocations, but
with only a single bit in the gstate, can't happen during mount. If we
detect orphans during mount, we set this internal counter to 1, assuming
we will find at least one orphan.
But this presents a problem, what if we find _no_ orphans? If this happens
we never decrement the internal counter of orphans, so we would never
clear the bit in the gstate. This leads to a running lfs_fs_deorphan
on more-or-less every mutable operation in the filesystem, resulting in
an extreme performance hit.
The solution here is to not subtract the number of found orphans, but assume
that when our lfs_fs_deorphan loop finishes, we will have no orphans, because
that's the whole point of lfs_fs_deorphan.
Note that the early termination of lfs_fs_deorphan was dropped because
it would not actually change the runtime complexity of lfs_fs_deorphan,
adds code cost, and risks fragile corner cases such as this one.
---
Also added tests to assert we run lfs_fs_deorphan at most once.
Found by kasper0 and Ldd309
This just means a rewrite of the superblock entry with the new minor
version.
Though it's interesting to note, we don't need to rewrite the superblock
entry until the first write operation in the filesystem, an optimization
that is already in use for the fixing of orphans and in-flight moves.
To keep track of any outdated minor version found during lfs_mount, we
can carve out a bit from the reserved bits in our gstate. These are
currently used for a counter tracking the number of orphans in the
filesystem, but this is usually a very small number so this hopefully
won't be an issue.
In-device gstate tag:
[-- 32 --]
[1|- 11 -| 10 |1| 9 ]
^----^-----^--^--^-- 1-bit has orphans
'-----|--|--|-- 11-bit move type
'--|--|-- 10-bit move id
'--|-- 1-bit needs superblock
'-- 9-bit orphan count
This was just an oversight. Seeking to the end of the directory should
not error, but instead restore the directory to the state where the next
read returns 0.
Note this matches the behavior of lfs_file_tell/lfs_file_seek.
Found by sosthene-nitrokey
There was already an assert for this, but because it included the
underlying equation for the requirement it was too confusing for
users that had no prior knowledge for why the assert could trigger.
The math works out such that 128 bytes is a reasonable minimum
requirement, so I've added that number as an explicit assert.
Hopefully this makes this sort of situation easier to debug.
Note that this requirement would need to be increased to 512 bytes if
block addresses are ever increased to 64-bits. DESIGN.md goes into more
detail why this is.
This has caught enough people that an explicit assert is warranted.
How littlefs, a c99 project, should be integrated with c89 projects
is still an open question, but no one deserves to debug this sort of
undetected casting issue.
Found by johnernberg and XinStellaris
Before, once converted to a CTZ skip-list, a file would remain a CTZ
skip-list even if truncated back to a size that could be inlined.
This was just a shortcut in implementation. And since the fix for boundary
truncates needed special handling for size==0, it made sense to extend
this special condition to allow reverting to inline files.
---
The only case I can think of, where reverting to an inline file would be
detrimental, is if it's a readonly file that you would otherwise not need
to pay the metadata overhead for. But as a tradeoff, inlining the file
would free up the block it was on, so it's unclear if this really is
a net loss.
If the truncate is followed by a write, reverting to an inline file will
always be beneficial. We assume writes will change the data, so in the
non-inlined case there's no way to avoid copying the underlying block.
Even if we assume padding issues are solved.
There has been a bug in the filesystem for a while where truncating to a
block boundary suffers from an off-by-one mistake that corrupts the
internal representation of the CTZ skip-list.
This mostly appears when the file_size == block_size, as file_size >
block_size includes CTZ skip-list metadata, so the underlying block
boundaries appear at slightly different offsets.
---
The reason for off-by-one issue is a nuance in lfs_ctz_find that we sort
of abuse to get two different behaviors.
Consider the situation where this bug occurs:
block 0 block 1
.--------. .--------.
| abcdef |<-| {ptr0} |
| ghijkl | | yzabcd |
| mnopqr | | |
| stuvwx | | |
'--------' '--------'
With these 24-byte blocks, there's an ambiguity if we wanted to point to
offset 24. We could point before the block boundary, or we could point
after the block boundary
Before:
block 0 block 1
.--------. .--------.
| abcdef |<-| {ptr0} |
| ghijkl | | yzabcd |
| mnopqr | | |
| stuvwx | | |
'-------^' '--------'
'-- off=24 is here
After:
block 0 block 1
.--------. .--------.
| abcdef |<-| {ptr0} |
| ghijkl | | yzabcd |
| mnopqr | | ^ |
| stuvwx | | | |
'--------' '-|------'
'-- off=24 is here
When we want these two offsets depends on the context. We want the
offset to be conservative if it represents a size, but eager if it is
being used to prepare a block for writing.
The workaround/hack is to prefer the eager offset, after the block boundary,
but use `size-1` as the argument if we need the conservative offset.
This finds the correct block, but is off-by-one in the calculated
block-offset. Fortunately we happen to not use the block-offset in the
places we need this workaround/hack.
---
To get back to the bug, the wrong mode of lfs_ctz_find was used in
lfs_file_truncate, leading to internal corruption of the CTZ skip-list.
The correct behavior is size-1, with care to avoid underflow.
Also I've tweaked the code to make it clear the calculated block-offset
goes unused in these situations.
Thanks to ghost, ajaybhargav, and others for reporting the issue,
colin-foster-advantage for a reproducible test case, and rvanschoren,
hgspbs for the initial solution.
This of course should never happen normally, two half-orphans requires
two parents, which is disallowed in littlefs for this reason. But it can
happen if there is an outdated half-orphan later in the metadata
linked-list. The two half-orphans can cause the deorphan step to get
stuck, constantly "fixing" the first half-orphan before it has a chance
to remove the problematic, outdated half-orphan later in the list.
The solution here is to do a full check for half-orphans before
restarting the half-orphan loop. This strategy has the potential to
visit more metadata blocks unnecessarily, but avoids situations where
removing a later half-orphan will eventually cause an earlier
half-orphan to resolve itself.
Found with heuristic powerloss testing with test_relocations_reentrant_renames
after 192 nested powerlosses.
Initially I thought the fcrc would be sufficient for all of the
end-of-commit context, since indicating that there is a new commit is a
simple as invalidating the fcrc. But it turns out there are cases that
make this impossible.
The surprising, and actually common, case, is that of an fcrc that
will end up containing a full commit. This is common as soon as the
prog_size is big, as small commits are padded to the prog_size at
minimum.
.------------------. \
| metadata | |
| | |
| | +-.
|------------------| | |
| foward CRC ------------.
|------------------| / | |
| commit CRC -----' |
|------------------| |
| padding | |
| | |
|------------------| \ \ |
| metadata | | | |
| | +-. | |
| | | | +-'
|------------------| / | |
| commit CRC --------' |
|------------------| |
| | /
'------------------'
When the commit + crc is all contained in the fcrc, something silly
happens with the math behind crcs. Everything in the commit gets
canceled out:
crc(m) = m(x) x^|P|-1 mod P(x)
m ++ crc(m) = m(x) x^|P|-1 + (m(x) x^|P|-1 mod P(x))
crc(m ++ crc(m)) = (m(x) x^|P|-1 + (m(x) x^|P|-1 mod P(x))) x^|P|-1 mod P(x)
crc(m ++ crc(m)) = (m(x) x^|P|-1 + m(x) x^|P|-1) x^|P|-1 mod P(x)
crc(m ++ crc(m)) = 0 * x^|P|-1 mod P(x)
This is the reason the crc of a message + naive crc is zero. Even with an
initializer/bit-fiddling, the crc of the whole commit ends up as some
constant.
So no manipulation of the commit can change the fcrc...
But even if this did work, or we changed this scheme to use two
different checksums, it would still require calculating the fcrc of
the whole commit to know if we need to tweak the first bit to invalidate
the unlikely-but-problematic case where we happen to match the fcrc. This
would add a large amount of complexity to the commit code.
It's much simpler and cheaper to keep the 1-bit counter in the tag, even
if it adds another moving part to the system.
This fixes most of the remaining bugs (except one with multiple padding
commits + noop erases in test_badblocks), with some other code tweaks.
The biggest change was dropping reliance on end-of-block commits to know
when to stop parsing commits. We can just continue to parse tags and
rely on the crc for catch bad commits, avoiding a backwards-compatiblity
hiccup. So no new commit tag.
Also renamed nprogcrc -> fcrc and commitcrc -> ccrc and made naming in
the code a bit more consistent.
Previously forward-looking CRCs was just two new CRC types, one for
commits with forward-looking CRCs, one without. These both contained the
CRC needed to complete the current commit (note that the commit CRC
must come last!).
[-- 32 --|-- 32 --|-- 32 --|-- 32 --]
with: [ crc3 tag | nprog size | nprog crc | commit crc ]
without: [ crc2 tag | commit crc ]
This meant there had to be several checks for the two possible structure
sizes, messying up the implementation.
[-- 32 --|-- 32 --|-- 32 --|-- 32 --|-- 32 --]
with: [nprogcrc tag| nprog size | nprog crc | commit tag | commit crc ]
without: [ commit tag | commit crc ]
But we already have a mechanism for storing optional metadata! The
different metadata tags! So why not use a separate tage for the
forward-looking CRC, separate from the commit CRC?
I wasn't sure this would actually help that much, there are still
necessary conditions for wether or not a forward-looking CRC is there,
but in the end it simplified the code quite nicely, and resulted in a ~200 byte
code-cost saving.
- General cleanup from integration, including cleaning up some older
commit code
- Partial-prog tests do not make sense when prog_size == block_size
(there can't be partial-progs!)
- Fixed signed-comparison issue in modified filebd
This change is necessary to handle out-of-order writes found by pjsg's
fuzzing work.
The problem is that it is possible for (non-NOR) block devices to write
pages in any order, or to even write random data in the case of a
power-loss. This breaks littlefs's use of the first bit in a page to
indicate the erase-state.
pjsg notes this behavior is documented in the W25Q here:
https://community.cypress.com/docs/DOC-10507
---
The basic idea here is to CRC the next page, and use this "erase-state CRC" to
check if the next page is erased and ready to accept programs.
.------------------. \ commit
| metadata | |
| | +---.
| | | |
|------------------| | |
| erase-state CRC -----. |
|------------------| | | |
| commit CRC ---|-|-'
|------------------| / |
| padding | | padding (doesn't need CRC)
| | |
|------------------| \ | next prog
| erased? | +-'
| | | |
| v | /
| |
| |
'------------------'
This is made a bit annoying since littlefs doesn't actually store the
page (prog_size) in the superblock, since it doesn't need to know the
size for any other operation. We can work around this by storing both
the CRC and size of the next page when necessary.
Another interesting note is that we don't need to any bit tweaking
information, since we read the next page every time we would need to
know how to clobber the erase-state CRC. And since we only read
prog_size, this works really well with our caching, since the caches
must be a multiple of prog_size.
This also brings back the internal lfs_bd_crc function, in which we can
use some optimizations added to lfs_bd_cmp.
Needs some cleanup but the idea is passing most relevant tests.
The previous cycle detection algorithm (a naive check against the largest
possible tail list) is simple and gets the job done, but has the potential to
take a very long time on disks with many blocks. Brent's algorithm, on
the other hand, takes at most 2x the number of blocks in the tail list.
Originally naive cycle detection was chosen over Floyd's algorithm to
avoid the extra complexity of managing two desynced traversals for every
traversal of the tail list, but Brent's algorithm is very well suited for our
use case, requiring only we keep track of an additional mdir pointer on the
stack as we traverse.
Despite the comment being correct, the calculation is somehow off by a word,
meaning something must have been missed. Maybe the space for the move-delete
was missed since that was added later to avoid losing move-deletes during
relocations.
This was found with the new exhaustive power-loss searching added to the
test framework with -P2. The exact failure was
test_dirs_many_reentrant:2gg2cb:k4o6. This must be the first test that
ends up with all possible extra state in a single mdir block.
This happens in rare situations where there is a failed mdir relocation,
interrupted by a power-loss, containing the destination of a directory
rename operation, where the directory being renamed preceded the
relocating mdir in the mdir tail-list. This requires at some point for a
previous directory rename to create a cycle.
If this happens, it's possible for the half-orphan to contain the only
reference to the renamed directory. Since half-orphans contain outdated
state when viewed through the mdir tail-list, the renamed directory
appears to be a full-orphan until we fix the relocating half-orphan.
This causes littlefs to incorrectly remove the renamed directory from
the mdir tail-list, causes catastrophic problems down the line.
The source of the problem is that the two different types of orphans
really operate on two different levels of abstraction: half-orphans fix
failed mdir commits, while full-orphans fix directory removes/renames.
Conflating the two leads to situations where we attempt to fix assumed
problems about the directory tree before we have fixed problems with the
mdir state.
The fix here is to separate out the deorphan search into two passes: one
to fix half-orphans and correct any mdir-commits, restoring the mdirs
and gstate to a known good state, then two to fix failed
removes/renames.
---
This was found with the -Plinear heuristic powerloss testing, which now
runs on more geometries. The failing case was:
test_relocations_reentrant_renames:112gg261dk1e3f3:123456789abcdefg1h1i1j1k1
l1m1n1o1p1q1r1s1t1u1v1g2h2i2j2k2l2m2n2o2p2q2r2s2t2
Also fixed/tweaked some parts of the test framework as a part of finding
this bug:
- Fixed off-by-one in exhaustive powerloss state encoding.
- Added --gdb-powerloss-before and --gdb-powerloss-after to help debug
state changes through a failing powerloss, maybe this should be
expanded to any arbitrary powerloss number in the future.
- Added lfs_emubd_crc and lfs_emubd_bdcrc to get block/bd crcs for quick
state comparisons while debugging.
- Fixed bd read/prog/erase counts not being copied during exhaustive
powerloss testing.
- Fixed small typo in lfs_emubd trace.
This is possible thanks to invoxiaamo's optimization of compacting
renames to avoid the O(n^3) nested filters. Not only does this
significantly reduce the runtime cost of that operation, but it
reduces the maximum possible depth of recursion to 3 frames.
Deepest lfs_dir_traverse before:
traverse with commit
'-> traverse with filter
'-> traverse with move
'-> traverse with filter
Deepest lfs_dir_traverse after:
traverse with commit
'-> traverse with move
'-> traverse with filter
Rename can be VERY time consuming. One of the reasons is the 4 recursion
level depth of lfs_dir_traverse() seen if a compaction happened during the
rename.
lfs_dir_compact()
size computation
[1] lfs_dir_traverse(cb=lfs_dir_commit_size)
- do 'duplicates and tag update'
[2] lfs_dir_traverse(cb=lfs_dir_traverse_filter, data=tag[1])
- Reaching a LFS_FROM_MOVE tag (here)
[3] lfs_dir_traverse(cb=lfs_dir_traverse_filter, data=tag[1]) <= on 'from' dir
- do 'duplicates and tag update'
[4] lfs_dir_traverse(cb=lfs_dir_traverse_filter, data=tag[3])
followed by the compaction itself:
[1] lfs_dir_traverse(cb=lfs_dir_commit_commit)
- do 'duplicates and tag update'
[2] lfs_dir_traverse(cb=lfs_dir_traverse_filter, data=tag[1])
- Reaching a LFS_FROM_MOVE tag (here)
[3] lfs_dir_traverse(cb=lfs_dir_traverse_filter, data=tag[1]) <= on 'from' dir
- do 'duplicates and tag update'
[4] lfs_dir_traverse(cb=lfs_dir_traverse_filter, data=tag[3])
Yet, analyse shows that levels [3] and [4] don't perform anything
if the callback is lfs_dir_traverse_filter...
A practical example:
- format and mount a 4KB block FS
- create 100 files of 256 Bytes named "/dummy_%d"
- create a 1024 Byte file "/test"
- rename "/test" "/test_rename"
- create a 1024 Byte file "/test"
- rename "/test" "/test_rename"
This triggers a compaction where lfs_dir_traverse was called 148393 times,
generating 25e6+ lfs_bd_read calls (~100 MB+ of data)
With the optimization, lfs_dir_traverse is now called 3248 times
(589e3 lfs_bds_calls (~2.3MB of data)
=> x 43 improvement...
- nit: Moving brace to end of if statement line for consistency
- mount: add more debug info per CR
- Fix compiler error from extra parentheses
- Fix superblock typo
The basic idea is simple, if we seek to a position in the currently
loaded cache, don't flush the cache. Notably this ensures that seek is
always as fast or faster than just reading the data.
This is a bit tricky since we need to check that our new block and
offset match the cache, fortunately we can skip the block check by
reevaluating the block index for both the current and new positions.
Note this only works whene reading, for writing we need to always flush
the cache, or else we will lose the pending write data.
Interestingly this was introduced by two different PRs which were not tested
together until pre-release testing:
- Fix lfs_file_seek doesn't update cache properties correctly
- Fix compiler warnings when LFS_READONLY defined
Benjamin Valentin