The idea behind separate ctrled+unctrled airspaces was to try to avoid
multiple interpretations of the on-disk bmap, but I'm starting to think
this adds more complexity than it solves.
The main conflict is the meaning of "in-flight" blocks. When using the
"uncontrolled" bmap algorithm, in-flight blocks need to be
double-checked by traversing the filesystem. But in the "controlled"
bmap algorithm, blocks are only marked as "in-flight" while they are
truly in-flight (in-use in RAM, but not yet in use on disk).
Representing these both with the same "in-flight" state risks
incompatible algorithms misinterpreting the bmap across different
mounts.
In theory the separate airspaces solve this, but now all the algorithms
need to know how to convert the bmap from different modes, adding
complexity and code cost.
Well, in theory at least. I'm unsure separate airspaces actually solves
this due to subtleties between what "in-flight" means in the different
algorithms (note both in-use and free blocks are "in-flight" in the
unknown airspace!). It really depends on how the "controlled" algorithm
actually works, which isn't implemented/fully designed yet.
---
Long story short, due to a time crunch, I'm ripping this out for now and
just storing the current algorithm in the wcompat flags:
LFS3_WCOMPAT_GBMAP 0x00006000 Global block-map in use
LFS3_WCOMPAT_GBMAPNONE 0x00000000 Gbmap not in use
LFS3_WCOMPAT_GBMAPCACHE 0x00002000 Gbmap in cache mode
LFS3_WCOMPAT_GBMAPVFR 0x00004000 Gbmap in VFR mode
LFS3_WCOMPAT_GBMAPIFR 0x00006000 Gbmap in IFR mode
Note GBMAPVFR/IFR != BMAPSLOW/FAST! At least BMAPSLOW/FAST can share
bmap representations:
- GBMAPVFR => Uncontrolled airspace, i.e. in-flight blocks may or may
not be in use, need to traverse open files.
- GBMAPIFR => Controlled airspace, i.e. in-flight blocks are in use,
at least until powerloss, no traversal needed, but requires more bmap
writes.
- BMAPSLOW => Treediff by checking what blocks are in B but not in A,
and what blocks are in A but not in B, O(n^2), but minimizes bmap
updates.
Can be optimized with a bloom filter.
- BMAPFAST => Treediff by clearing all blocks in A, and then setting all
blocks in B, O(n), but also writes all blocks to the bmap twice even
on small changes.
Can be optimized with a sliding bitmap window (or a block hashtable,
though a bitmap converges to the same thing in both algorithms when
>=disk_size).
It will probably be worth unifying the bmap representation later (the
more algorithm-specific flags there are, the harder interop becomes for
users, but for now this opens a path to implementing/experimenting with
bmap algorithms without dealing with this headache.
This only works immediately after format, and only for one pass of the
disk, but it's a good way to test bmap lookups/allocation without
worrying about more complicated filesystem-wide interactions.
This adds LFS3_o_WRSET as an internal-only 3rd file open mode (I knew
that missing open mode would come in handy) that has some _very_
interesting behavior:
- Do _not_ clear the configured file cache. The file cache is prefilled
with the file's data.
- If the file does _not_ exist and is small, create it immediately in
lfs3_file_open using the provided file cache.
- If the file _does_ exist or is not small, do nothing and open the file
normally. lfs3_file_close/sync can do the rest of the work in one
commit.
This makes it possible to implement one-commit lfs3_set on top of the
file APIs with minimal code impact:
- All of the metadata commit logic can be handled by lfs3_file_sync_, we
just call lfs3_file_sync_ with the found did+name in lfs3_file_opencfg
when WRSET.
- The invariant that lfs3_file_opencfg always reserves an mid remains
intact, since we go ahead and write the full file if necessary,
minimizing the impact on lfs3_file_opencfg's internals.
This claws back most of the code cost of the one-commit key-value API:
code stack ctx
before: 38232 2400 636
after: 37856 (-1.0%) 2416 (+0.7%) 636 (+0.0%)
before kv: 37352 2280 636
after kv: 37856 (+1.3%) 2416 (+6.0%) 636 (+0.0%)
---
I'm quite happy how this turned out. I was worried there for a bit the
key-value API was going to end up an ugly wart for the internals, but
with LFS3_o_WRSET this integrates quite nicely.
It also raises a really interesting question, should LFS3_o_WRSET be
exposed to users?
For now I'm going to play it safe and say no. While potentially useful,
it's still a pretty unintuitive API.
Another thing worth mentioning is that this does have a negative impact
on compile-time gc. Duplication adds code cost when viewing the system
as a whole, but tighter integration can backfire if the user never calls
half the APIs.
Oh well, compile-time opt-out is always an option in the future, and
users seem to care more about pre-linked measurements, probably because
it's an easier thing to find. Still, it's funny how measuring code can
have a negative impact on code. Something something Goodhart's law.
Christopher Haster