- Fixed off-by-one id for unknown tags.
- Allowed block_size and block to go unspecified, assumes the block
device is one big block in that case.
- Added --buffer and --ignore-errors to watch.py, making it a bit better
for watching slow and sometimes error scripts, such as dbgrbyd.py when
watching a block device under test.
Well not really fixed, more just added an assert to make sure
lfsr_rbyd_lookup is not called with tag 0. Because our alt tags only
encode less-than-or-equal and greater-than, which can be flipped
trivially, it's not possible to encode removal of tag 0 during deletes.
Fortunately, this tag should already not exist for other pragmatic
reasons, it was just used as the initial value for traversals, where it
could cause this bug.
If we combine rbyd ids and B-tree weights, we need 32-bit ids since this
will eventually need to cover the full range of a file. This simply
doesn't fit into a single word anymore, unless littlefs uses 64-bit tags.
Generally not a great idea for a filesystem targeting even 8-bit
microcontrollers.
So here is a tag encoding that uses 3 leb128 words. This will likely
have more code cost and slightly more disk usage (we can no longer fit
tags into 2 bytes), though with most tags being alt pointers (O(m log m)
vs O(m)), this may not be that significant.
Note that we try to keep tags limited to 14-bits to avoid an extra leb128 byte,
which would likely affect all alt pointers. To pull this off we do away
with the subtype/suptype distinction, limiting in-tree tag types to
10-bits encoded on a per-suptype basis:
in-tree tags:
ttttttt ttt00rv
^--^^- 10-bit type
'|- removed bit
'- valid bit
iiii iiiiiii iiiiiii iiiiiii iiiiiii
^- n-bit id
lllllll lllllll lllllll lllllll
^- m-bit length
out-of-tree tags:
ttttttt ttt010v
^---^- 10-bit type
'- valid bit
0000000
lllllll lllllll lllllll lllllll
^- m-bit length
alt tags:
kkkkkkk kkk1dcv
^-^^^- 10-bit key
'||- direction bit
'|- color bit
'- valid bit
wwww wwwwwww wwwwwww wwwwwww wwwwwww
^- n-bit weight
jjjjjjj jjjjjjj jjjjjjj jjjjjjj
^- m-bit jump
The real pain is that with separate integers for id and tag, it no
longer makes sense to combine these into one big weight field. This
requires a significant rewrite.
- Added both uattr (limited to 256) and id (limited to 65535) benchmarks
covering the main rbyd operations
- Fixed issue where --defines gets passed to the test/bench runners when
querying id-specific information. After changing the test/bench
runners to prioritize explicit defines, this causes problems for
recorded benchmark results and debug related things.
- In plot.py/plotmpl.py, made --by/-x/-y in subplots behave somewhat
reasonably, contributing to a global dataset and the figure's legend,
colors, etc, but only shown in the specified subplot. This is useful
mainly for showing different -y values on different subplots.
- In plot.py/plotmpl.py, added --labels to allow explicit configuration
of legend labels, much like --colors/--formats/--chars/etc. This
removes one of the main annoying needs for modifying benchmark results.
I'm still not sure this is the best decision, since it may add some
complexity to tag parsing, but making most crcs one byte may be valuable
since these exist in every single commit.
This gives tags three high-level encodings:
in-tree tags:
iiiiiii iiiiitt ttTTTTT TTT00rv
^----^--------^--^^- 16-bit id
'--------|--||- 4-bit suptype
'--||- 8-bit subtype
'|- removed bit
'- valid bit
lllllll lllllll lllllll lllllll
^- n-bit length
out-of-tree tags:
------- -----TT TTTTTTt ttt01pv
^----^--^^- 8-bit subtype
'--||- 4-bit suptype
'|- perturb bit
'- valid bit
lllllll lllllll lllllll lllllll
^- n-bit length
alt tags:
wwwwwww wwwwwww wwwwwww www1dcv
^-^^^- 28-bit weight
'||- direction bit
'|- color bit
'- valid bit
jjjjjjj jjjjjjj jjjjjjj jjjjjjj
^- n-bit jump
Having the location of the subtype flipped for crc tags vs tree tags is
unintuitive, but it makes more crc tags fit in a single byte, while
preserving expected tag ordering for tree tags.
The only case where crc tags don't fit in a single byte if is non-crc
checksums (sha256?) are added, at which point I expect the subtype to
indicate which checksum algorithm is in use.
$ ./scripts/dbgrbyd.py disk 4096 0 -t
mdir 0x0, rev 1, size 121
off tag data (truncated)
0000005e: +-+-+--> uattr 0x01 4 aa aa aa aa ....
0000000f: | | '--> uattr 0x02 4 aa aa aa aa ....
0000001d: | '----> uattr 0x03 4 aa aa aa aa ....
0000002d: | .----> uattr 0x04 4 aa aa aa aa ....
0000003d: | | .--> uattr 0x05 4 aa aa aa aa ....
0000004f: '-+-+-+> uattr 0x06 4 aa aa aa aa ....
00000004: '> uattr 0x07 4 aa aa aa aa ....
Unfortunately this tree can end up a bit confusing when alt pointers
live in unrelated search paths...
Toying around with the idea that since rbyd trees have strict height
gaurantees after compaction (2*log2(n)+1), we can proactively calculate
the maximum on-disk space required for a worst case tree+leb128
encoding.
This would _greatly_ simplify things such as metadata compaction and
splitting, and allow unstorable file metadata (too many custom
attributes) to error early.
One issue is that this calculated worst case will likely be ~4-5x worst
than the actual encoding due to leb128 compression. Though this may be an
acceptable tradeoff for the simplification and more reliable behavior.
Previously the subtype was encoded above the suptype. This was an issue
if you wanted to, say, traverse all tags in a given suptype.
I'm not sure yet if this sort of functionality is needed, it may be
useful for cleaning up/replacing classes of tags, such as file struct
tags, but not sure yet. At the very least is avoids unintuitive tag
ordering in the tree, which could potential cause problems for
create/deletes.
New encoding:
tags:
iiiiiii iiiiitt ttTTTTT TTT0trv
^----^--------^-^^^- 16-bit id
'--------|-'||- 5-bit suptype (split)
'--||- 8-bit subtype
'|- perturb/remove bit
'- valid bit
lllllll lllllll lllllll lllllll
^- n-bit length
alts:
wwwwwww wwwwwww wwwwwww www1dcv
^^^-^- 28-bit weight
'|-|- color bit
'-|- direction bit
'- valid bit
jjjjjjj jjjjjjj jjjjjjj jjjjjjj
^- n-bit jump
Also a large amount of name changes and other cleanup.
Tree deletion is such a pain. It always seems like an easy addition to
the core algorithm but always comes with problems.
The initial plan for deletes was to iterate through all tags, tombstone,
and then adjust weights as needed. This accomplishes deletes with little
change to the rbyd algorithm, but adds a complex traversal inside the
commit logic. Doable in one commit, but complex. It also risks weird
unintuitive corner cases since the cost of deletion grows with the number
of tags being deleted (O(m log n)).
But this rbyd data structure is a tree, so in theory it's possible to
delete a whole range of tags in a single O(log n) operation.
---
This is a proof-of-concept range deletion algorithm for rbyd trees.
Note, this does not preserve rbyd's balancing properties! But it is no
worse than tombstoning. This is acceptable for littlefs as any
unbalanced trees will be rebalanced during compaction.
The idea is to follow the same underlying dhara algorithm, where we
follow a search path and save any alt pointers not taken, but we follow
both search paths that form the outside of the range, and only keep
outside edges.
For example, a tree:
.-------o-------.
| |
.---o---. .---o---.
| | | |
.-o-. .-o-. .-o-. .-o-.
| | | | | | | |
a b c d e f g h
To delete the range d-e, we would search for d, and search for e:
********o********
* *
.---***** *****---.
| * * |
.-o-. .-*** ***-. .-o-.
| | | * * | | |
a b c d e f g h
And keep the outside edges:
.--- ---.
| |
.-o-. .- -. .-o-.
| | | | | |
a b c f g h
But how do we combine the outside edges? The simpler option is to do
both searches seperately, one after the other. This would end up with a
tree like this:
.---------o
| |
.-o-. .---o
| | | |
a b c o---------.
| |
o---. .-o-.
| | | |
_ f g h
But this horribly throws off the balance of our tree! It's worse than
tombstoning, and gets worse with more tags.
An alternative strategy, which is used here, is to alternate edges as we
descend down the tree. This unfortunately is more complex, and requires
~2x the RAM, but better preserves the balance of our tree. It isn't
perfect, because we lose color information, but we can leave that up to
compaction:
.---------o
| |
.-o-. o---------.
| | | |
a b .---o .-o-.
| | | |
c o---. g h
| |
_ f
I also hope this can be merged into lfs_rbyd_append, deduplicating the
entire core rbyd append algorithm.
Considered adding --ignore-errors to watch.py, but it doesn't really
make sense with watch.py's implementation. watch.py would need to not update
in realtime, which conflicts with other use cases.
It's quite lucky a spare bit is free in the tag encoding, this means we
don't need a reserved length value as originally planned. We end up using
all of the bits that overlap the alt pointer encoding, which is nice and
unexpected.
It turns out statefulness works quite well with this algorithm (The
prototype was in Haskell, which created some artificial problems. I
think it may have just been too high-level a language for this
near-instruction-level algorithm).
This bias makes it so that tag lookups always find a tag strictly >= the
requested tag, unless we are at the end of the tree.
This makes tree traversal trivial, which is quite nice.
Need to remove ntag now, it's no longer needed.
- Moved alt encoding 0x1 => 0x4, which can lead to slightly better
lookup tables, the perturb bit takes the same place as the color bit,
which means both can be ignored in readonly operations.
- Dropped lfs_rbyd_fetchmatch, asking each lfs_rbyd_fetch to include NULL
isn't that bad.
New encoding:
tags:
iiii iiiiiii iiiiiTT TTTTTTt ttt0tpv
^--------^------^^^- 16-bit id
'------|||- 8-bit type2
'||- 5-bit type1
'|- perturb bit
'- valid bit
llll lllllll lllllll lllllll lllllll
^- n-bit length
alts:
wwww wwwwwww wwwwwww wwwwwww www1dcv
^^^-^- 28-bit weight
'|-|- color bit
'-|- direction bit
'- valid bit
jjjj jjjjjjj jjjjjjj jjjjjjj jjjjjjj
^- n-bit jump
Initially I thought the fcrc would be sufficient for all of the
end-of-commit context, since indicating that there is a new commit is a
simple as invalidating the fcrc. But it turns out there are cases that
make this impossible.
The surprising, and actually common, case, is that of an fcrc that
will end up containing a full commit. This is common as soon as the
prog_size is big, as small commits are padded to the prog_size at
minimum.
.------------------. \
| metadata | |
| | |
| | +-.
|------------------| | |
| foward CRC ------------.
|------------------| / | |
| commit CRC -----' |
|------------------| |
| padding | |
| | |
|------------------| \ \ |
| metadata | | | |
| | +-. | |
| | | | +-'
|------------------| / | |
| commit CRC --------' |
|------------------| |
| | /
'------------------'
When the commit + crc is all contained in the fcrc, something silly
happens with the math behind crcs. Everything in the commit gets
canceled out:
crc(m) = m(x) x^|P|-1 mod P(x)
m ++ crc(m) = m(x) x^|P|-1 + (m(x) x^|P|-1 mod P(x))
crc(m ++ crc(m)) = (m(x) x^|P|-1 + (m(x) x^|P|-1 mod P(x))) x^|P|-1 mod P(x)
crc(m ++ crc(m)) = (m(x) x^|P|-1 + m(x) x^|P|-1) x^|P|-1 mod P(x)
crc(m ++ crc(m)) = 0 * x^|P|-1 mod P(x)
This is the reason the crc of a message + naive crc is zero. Even with an
initializer/bit-fiddling, the crc of the whole commit ends up as some
constant.
So no manipulation of the commit can change the fcrc...
But even if this did work, or we changed this scheme to use two
different checksums, it would still require calculating the fcrc of
the whole commit to know if we need to tweak the first bit to invalidate
the unlikely-but-problematic case where we happen to match the fcrc. This
would add a large amount of complexity to the commit code.
It's much simpler and cheaper to keep the 1-bit counter in the tag, even
if it adds another moving part to the system.
This fixes most of the remaining bugs (except one with multiple padding
commits + noop erases in test_badblocks), with some other code tweaks.
The biggest change was dropping reliance on end-of-block commits to know
when to stop parsing commits. We can just continue to parse tags and
rely on the crc for catch bad commits, avoiding a backwards-compatiblity
hiccup. So no new commit tag.
Also renamed nprogcrc -> fcrc and commitcrc -> ccrc and made naming in
the code a bit more consistent.
Previously forward-looking CRCs was just two new CRC types, one for
commits with forward-looking CRCs, one without. These both contained the
CRC needed to complete the current commit (note that the commit CRC
must come last!).
[-- 32 --|-- 32 --|-- 32 --|-- 32 --]
with: [ crc3 tag | nprog size | nprog crc | commit crc ]
without: [ crc2 tag | commit crc ]
This meant there had to be several checks for the two possible structure
sizes, messying up the implementation.
[-- 32 --|-- 32 --|-- 32 --|-- 32 --|-- 32 --]
with: [nprogcrc tag| nprog size | nprog crc | commit tag | commit crc ]
without: [ commit tag | commit crc ]
But we already have a mechanism for storing optional metadata! The
different metadata tags! So why not use a separate tage for the
forward-looking CRC, separate from the commit CRC?
I wasn't sure this would actually help that much, there are still
necessary conditions for wether or not a forward-looking CRC is there,
but in the end it simplified the code quite nicely, and resulted in a ~200 byte
code-cost saving.
This change is necessary to handle out-of-order writes found by pjsg's
fuzzing work.
The problem is that it is possible for (non-NOR) block devices to write
pages in any order, or to even write random data in the case of a
power-loss. This breaks littlefs's use of the first bit in a page to
indicate the erase-state.
pjsg notes this behavior is documented in the W25Q here:
https://community.cypress.com/docs/DOC-10507
---
The basic idea here is to CRC the next page, and use this "erase-state CRC" to
check if the next page is erased and ready to accept programs.
.------------------. \ commit
| metadata | |
| | +---.
| | | |
|------------------| | |
| erase-state CRC -----. |
|------------------| | | |
| commit CRC ---|-|-'
|------------------| / |
| padding | | padding (doesn't need CRC)
| | |
|------------------| \ | next prog
| erased? | +-'
| | | |
| v | /
| |
| |
'------------------'
This is made a bit annoying since littlefs doesn't actually store the
page (prog_size) in the superblock, since it doesn't need to know the
size for any other operation. We can work around this by storing both
the CRC and size of the next page when necessary.
Another interesting note is that we don't need to any bit tweaking
information, since we read the next page every time we would need to
know how to clobber the erase-state CRC. And since we only read
prog_size, this works really well with our caching, since the caches
must be a multiple of prog_size.
This also brings back the internal lfs_bd_crc function, in which we can
use some optimizations added to lfs_bd_cmp.
Needs some cleanup but the idea is passing most relevant tests.
- Added support for negative numbers in the leb16 encoding with an
optional 'w' prefix.
- Changed prettyasserts.py rule to .a.c => .c, allowing other .a.c files
in the future.
- Updated .gitignore with missing generated files (tags, .csv).
- Removed suite-namespacing of test symbols, these are no longer needed.
- Changed test define overrides to have higher priority than explicit
defines encoded in test ids. So:
./runners/bench_runner bench_dir_open:0f1g12gg2b8c8dgg4e0 -DREAD_SIZE=16
Behaves as expected.
Otherwise it's not easy to experiment with known failing test cases.
- Fixed issue where the -b flag ignored explicit test/bench ids.
Driven primarily by a want to compare measurements of different runtime
complexities (it's difficult to fit O(n) and O(log n) on the same plot),
this adds the ability to nest subplots in the same .svg which try to align
as much as possible. This turned out to be surprisingly complicated.
As a part of this, adopted matplotlib's relatively recent
constrained_layout, which behaves much more consistently.
Also dropped --legend-left, no one should really be using that.
The difference between ggplot's gray and GitHub's gray was a bit jarring.
This also adds --foreground and --font-color for this sort of additional
color control without needing to add a new flag for every color scheme
out there.
- Renamed struct_.py -> structs.py again.
- Removed lfs.csv, instead prefering script specific csv files.
- Added *-diff make rules for quick comparison against a previous
result, results are now implicitly written on each run.
For example, `make code` creates lfs.code.csv and prints the summary, which
can be followed by `make code-diff` to compare changes against the saved
lfs.code.csv without overwriting.
- Added nargs=? support for -s and -S, now uses a per-result _sort
attribute to decide sort if fields are unspecified.
For long running processes (testing with >1pls) these logs can grow into
multiple gigabytes, humorously we never access more than the last n lines
as requested by --context. Piping the stdout with --stdout does not use
additional RAM.
- Fixed added/removed count in scripts when an entry has no field in
the expected results
- Fixed a python-sort-type issue when by-field is missing in a result
This happens in rare situations where there is a failed mdir relocation,
interrupted by a power-loss, containing the destination of a directory
rename operation, where the directory being renamed preceded the
relocating mdir in the mdir tail-list. This requires at some point for a
previous directory rename to create a cycle.
If this happens, it's possible for the half-orphan to contain the only
reference to the renamed directory. Since half-orphans contain outdated
state when viewed through the mdir tail-list, the renamed directory
appears to be a full-orphan until we fix the relocating half-orphan.
This causes littlefs to incorrectly remove the renamed directory from
the mdir tail-list, causes catastrophic problems down the line.
The source of the problem is that the two different types of orphans
really operate on two different levels of abstraction: half-orphans fix
failed mdir commits, while full-orphans fix directory removes/renames.
Conflating the two leads to situations where we attempt to fix assumed
problems about the directory tree before we have fixed problems with the
mdir state.
The fix here is to separate out the deorphan search into two passes: one
to fix half-orphans and correct any mdir-commits, restoring the mdirs
and gstate to a known good state, then two to fix failed
removes/renames.
---
This was found with the -Plinear heuristic powerloss testing, which now
runs on more geometries. The failing case was:
test_relocations_reentrant_renames:112gg261dk1e3f3:123456789abcdefg1h1i1j1k1
l1m1n1o1p1q1r1s1t1u1v1g2h2i2j2k2l2m2n2o2p2q2r2s2t2
Also fixed/tweaked some parts of the test framework as a part of finding
this bug:
- Fixed off-by-one in exhaustive powerloss state encoding.
- Added --gdb-powerloss-before and --gdb-powerloss-after to help debug
state changes through a failing powerloss, maybe this should be
expanded to any arbitrary powerloss number in the future.
- Added lfs_emubd_crc and lfs_emubd_bdcrc to get block/bd crcs for quick
state comparisons while debugging.
- Fixed bd read/prog/erase counts not being copied during exhaustive
powerloss testing.
- Fixed small typo in lfs_emubd trace.
- Changed --(tool)-tool to --(tool)-path in scripts, this seems to be
a more common name for this sort of flag.
- Changed BUILDDIR to not have implicit slash, makes Makefile internals
a bit more readable.
- Fixed some outdated names hidden in less-often used ifdefs.
Added a couple flags to make the script a bit more flexible, and removed
littlefs-specific default in line with the other scripts which aren't
really littlefs-specific. (These defaults can be moved to the
littlefs-specific Makefile easily enough).
The original behavior can be reproduced like so:
./script/changeprefix.py lfs lfs2 --git
- Fixed prettyasserts.py parsing when '->' is in expr
- Made prettyasserts.py failures not crash (yay dynamic typing)
- Fixed the initial state of the emubd disk file to match the internal
state in RAM
- Fixed true/false getting changed to True/False in test.py/bench.py
defines
- Fixed accidental substring matching in plot.py's --by comparison
- Fixed a missed LFS_BLOCk_CYCLES in test_superblocks.toml that was
missed
- Changed test.py/bench.py -v to only show commands being run
Including the test output is still possible with test.py -v -O-, making
the implicit inclusion redundant and noisy.
- Added license comments to bench_runner/test_runner
Note that plotmpl.py tries to share many arguments with plot.py,
allowing plot.py to act as a sort of draft mode for previewing plots
before creating an svg.
Based loosely on Linux's perf tool, perfbd.py uses trace output with
backtraces to aggregate and show the block device usage of all functions
in a program, propagating block devices operation cost up the backtrace
for each operation.
This combined with --trace-period and --trace-freq for
sampling/filtering trace events allow the bench-runner to very
efficiently record the general cost of block device operations with very
little overhead.
Adopted this as the default side-effect of make bench, replacing
cycle-based performance measurements which are less important for
littlefs.
This adds -P/--propagate and -Z/--depth to perf.py for showing recursive
results, making it easy to narrow down on where spikes in performance
come from.
This ended up being a bit different from stack.py's recursive results,
as we end up with different (diminishing) numbers as we descend.
This provides 2 things:
1. perf integration with the bench/test runners - This is a bit tricky
with perf as it doesn't have its own way to combine perf measurements
across multiple processes. perf.py works around this by writing
everything to a zip file, using flock to synchronize. As a plus, free
compression!
2. Parsing and presentation of perf results in a format consistent with
the other CSV-based tools. This actually ran into a surprising number of
issues:
- We need to process raw events to get the information we want, this
ends up being a lot of data (~16MiB at 100Hz uncompressed), so we
paralellize the parsing of each decompressed perf file.
- perf reports raw addresses post-ASLR. It does provide sym+off which
is very useful, but to find the source of static functions we need to
reverse the ASLR by finding the delta the produces the best
symbol<->addr matches.
- This isn't related to perf, but decoding dwarf line-numbers is
really complicated. You basically need to write a tiny VM.
This also turns on perf measurement by default for the bench-runner, but at a
low frequency (100 Hz). This can be decreased or removed in the future
if it causes any slowdown.
Christopher Haster