- LFS_I_INCONSISTENT -> LFS_I_MKCONSISTENT
- LFS_I_CANLOOKAHEAD -> LFS_I_LOOKAHEAD
- LFS_I_UNCOMPACTED -> LFS_I_COMPACT
- LFS_I_CANCKMETA -> LFS_I_CKMETA
- LFS_I_CANCKDATA -> LFS_I_CKDATA
This just makes everything easier to read/pattern match, even if it's
a bit inaccurate english-wise. The imperative transformations were also
wildly inconsistent...
LFS_GC_CKMETA and LFS_GC_CKDATA are a bit unique in that their work is
never really done.
Where LFS_GC_MKCONSISTENT/COMPACT can prove things about the system,
LFS_GC_CKMETA/CKDATA can't, because it's always possible for new
bit-errors to develop. Even _during_ an LFS_GC_CKMETA/CKDATA traversal.
But while this is technically true, it's not a very useful state of
things for our lfsr_gc API...
---
What we really want is some way to know if ckmeta/ckdata has completed
"recently" (for some definition of recently), and to let users indicate
when they need another ckmeta/ckdata scan.
To try to solve this:
1. Added LFS_I_CANCKMETA and LFS_I_CANCKDATA to indicate when lfsr_gc
has not checked metadata/data.
These are set during mount (unless mounting with
LFS_M_CKMETA/CKDATA), and cleared when either lfsr_gc completes or
lfsr_fs_ckmeta/data is called. Once cleared, littlefs will not reset
them on its own.
2. Added lfsr_gc_unck to allow users to explicitly reset LFS_I_CKMETA
and/or LFS_I_CKDATA, which will tell lfsr_gc to check metadata/data
again on the next call.
There is some subtlety around clobbering ongoing traversals, but a
mask and some tests should prevent this from being a problem.
Currently, lfsr_gc_unck also allows clearing of other gc flags, but
I'm not sure there's any real use-case for this...
Note that you can still get the previous behavior if you just call
lfsr_gc_unck after every lfsr_gc call.
This also changes info flag behavior slightly in default mode, with
LFS_I_CANCKMETA/CANCKDATA telling you if metadata/data has been checked
since mount. Which does seem useful? Maybe these flags deserve a better
name?
Code changes:
code stack ctx
default before: 37796 (+0.0%) 2608 (+0.0%) 620 (+0.0%)
default after: 37792 (+0.0%) 2608 (+0.0%) 620 (+0.0%)
gc before: 37896 2608 768
gc after: 37938 (+0.1%) 2608 (+0.0%) 768 (+0.0.%)
These should be the last implicit buffers in LFSR_DATA_* macros, leaving
only LFSR_RAT_* macros with implicit stack-allocations (which are wayyy
too useful to give up).
There's an argument to keep these macros implicit, since they represent
relatively small things, but a stack allocation is a stack allocation.
It's safer to make stack allocations explicit, though it does risk
buffer overflow if these fall out-of-sync...
I guess we're forced to choose our poison...
In the end consistency with other LFSR_DATA_* macros wins.
---
And, again, compound-literals are so poorly optimized this minor cleanup
somehow saves code:
code stack ctx
before: 38060 2608 752
after: 38000 (-0.2%) 2608 (+0.0%) 752 (+0.0%)
This was a disappointing failure of compount-literals.
These macros protect against mismatched buffer sizes, which is great for
preventing bugs caused by simple typos, but the overhead of compound-
literals requiring initialization make them simply unusable.
This commit leaves only a couple macros with implicit buffers:
LFSR_DATA_LEB128, and the LFSR_RAT_CAT/LFSR_RATS macros.
Even the tiny cleanup of the one remaining implicit-buffer macro still
in use, LFSR_DATA_GEOMETRY, saved some code:
code stack ctx
before: 38084 2608 752
after: 38060 (-0.1%) 2608 (+0.0%) 752 (+0.0%)
- Fixed issue where some overflowed compat flags could end up ignored.
A simple typo: incrementing by the unrelated d variable, meant we
were skipping overflowed compat flags whenever the previous logic sets
d > 1.
- Fixed issue where any zero padding was treated as overflowed compat
flags.
Note this hid the previous issue from our tests.
Added more tests to prevent a regression here. Letting bad compat flag
parsing through would be _very_ annoying in the future.
Code changes:
code stack ctx
before: 38148 2608 752
after: 38084 (-0.2%) 2608 (+0.0%) 752 (+0.0%)
To clarify this only checks data reads, and to makes space for future
theoretical ck-operations:
- ckmetaredund - likely
- ckdataredund - unlikely, expensive
- ckmetacksums - unlikely, expensive
- ckdatacksums - implemented
This also tweaks the relevant mount/format/info flags a bit:
LFS_M_CKPROGS 0x00100000 Check progs by reading back progged data
LFS_M_CKFETCHES 0x00200000 Check block checksums before first use
LFS_M_CKPARITY 0x00400000 Check metadata tag parity bits
LFS_M_CKMETAREDUND+ 0x01000000 Check metadata redund blocks on reads
LFS_M_CKDATAREDUND* 0x02000000 Check data redund blocks on reads
LFS_M_CKMETACKSUMS* 0x04000000 Check metadata checksums on reads
LFS_M_CKDATACKSUMS 0x08000000 Check data checksums on reads
+Planned
*Hypothetical
No code changes.
This is the tradeoff of not erroring on unknown filetypes during mount.
- lfsr_file_open and lfsr_mtree_pathlookup now returns LFS_ERR_NOTSUP
instead of LFS_ERR_NOTDIR/LFS_ERR_ISDIR if it encounters an unkown
filetype.
This gets a bit subtle. You might think LFS_ERR_NOTDIR is reasonable,
but it's possible for our unknown filetype to be something dir-like.
Symlinks are an excellent example.
- lfsr_remove/lfsr_rename now bail with LFS_ERR_NOTSUP if encountering
an unknown filetype.
This conflicts with the POSIX philosophy of remove always being
allowed, but I'm not sure what other option there is. Maybe allowing
removes when mounted with LFS_M_FORCE?
We can't just allow removes by default because of the risk of leaking
resources. Directories being the main example of this (need to clean
up bookmarks).
Maybe leaky filetypes should also set WCOMPAT flags?
Not doing something is cheaper than doing something, so unfortunately
this costs us more than what we saved from dropping the orphan/unknown
scan during mount:
code stack ctx
bail: 38120 2624 725
no-error-no-bail (before): 38020 (-0.3%) 2624 (+0.0%) 752 (+0.0%)
error-no-bail (after): 38140 (+0.1%) 2624 (+0.0%) 752 (+0.0%)
But this is probably worth it for the extra flexibility.
The motivation here is to simplify lfsr_mount, but there's a number of
knock-on effects.
For one, lfsr_mount should now be faster on filesystems with large
blocks:
O(nb(log b)(log_b n)) -> O(nb(log_b n))
But we now no longer check if our filesystem contains orphaned
stickynotes or unknown filetypes:
- Orphaned stickynotes turned out to not be a big deal. If we find
orphans we'd need to do a second traversal to remove them anyways (no
mutation allowed in lfsr_mount), so this actually ends up a net
improvement in the found-orphan case.
If anything, doing a traversal on first write sets user expectations
correctly, and can be offloaded with lfsr_fs_mkconsistent or
lfsr_fs_gc.
- Unknown filetypes are a bit more annoying (I actually forgot about
this check), but unknown filetypes that require special care should
probably set WCOMPAT/RCOMPAT flags.
Allowing unknown filetypes is a bit more flexible in cases where a
filesystem image is being shared between drivers with different
features (bootloader + app for example).
Though we should probably add more checks/tests that we're handling
these correctly now that we no longer just bail during mount...
Also renamed LFS_I_HASORPHANS -> LFS_I_UNTIDY.
Not doing something is cheaper than doing something, so this saves a bit
of code:
code stack ctx
before: 38120 2624 752
after: 38020 (-0.3%) 2624 (+0.0%) 752 (+0.0%)
We already have lfsr_cat_t so...
lfsr_rattr_t is a pretty fundamental type for littlefs, unfortunately
the name "rattr" is a mouthful. Shortening this to just "rat" hopefully
makes things easier to read at the cost of it being a bit less clear
what lfsr_rat_t actually is.
Though it's possible I've been staring at the dwarf spec (DW_AT_*) for
too long...
Fortunately, while these two code bases have almost completely diverged
at this point, we can at least reuse the reworked test_paths tests.
Mostly involving corner-cases related to trailing-slashes, these changes
gives us better alignment with POSIX and hopefully fewer surprises for
users. The full details of what's changed is in the v2.10 release notes/
commits.
---
Implementing these changes here required a little bit of backpedaling.
Something that worked quite well upstream was the use of trailing junk
in the path to tell if a parent was not found, path must be dir, etc.
This is a bit more awkward with lfsr_mtree_pathlookup, with everything
taking an explicit name_size, but it greatly simplifies the mess that
was lfsr_mtree_pathlookup's error codes.
Now it's just:
- 0 => file found
- 0, lfsr_path_isdir(path) => dir found
- 0, mdir.mid=-1 => root found
- LFS_ERR_NOENT, lfsr_path_islast(path) => file not found
- LFS_ERR_NOENT, !lfsr_path_islast(path) => parent not found
- LFS_ERR_NOTDIR => parent not a dir
Note the special mdir.mid=-1 case for the root. This was needed since
lfsr_mtree_pathlookup can now return LFS_ERR_INVAL (for empty paths, dot
dots above root, etc).
In theory we could've gotten away with a different error code, but none
of them really make sense for this case.
---
The impact on code size is a bit funny. Modifying the path in-place _is_
a cheaper API, at the cost of being a bit more convoluted, but the extra
logic added for POSIX-alignment cancels this out:
code stack ctx
before: 38100 (-0.1%) 2624 (+0.0%) 752 (+0.0%)
after: 38120 (+0.0%) 2624 (+0.0%) 752 (+0.0%)
To avoid the obvious conflict with lfs_attr. Unlike lfsr_rattr_t,
lfs_attr is user facing, so it gets priority.
This name may change in the future if something better comes up, but in
the meantime we need to change the name to _something_.
Is this the reason Linux/BSD/etc call these xattrs?
(Note littlefs's attrs are much more limited than xattrs. We should
_not_ call these xattrs in case we want to add true xattrs in the
future.)
Since we already need all the machinery to track ck info for ckparity, I
figured we might as well implement a full ckcksums option as well.
Ckcksums closes the checksum-read-hole by reading enough data to check a
relevant checksum on ever read, even if this ends up being significantly
more data than the initial request. This should always detect detectable
bit-errors, even if they occur between consecutive reads.
If this sounds naive, that's because it is. Performance will be awful.
To be clear, ckcksums should probably never be used in production. I
can't think of a use case that isn't better handled by either ECC in the
block device or the future-planned ckredund feature. Just look at the
runtime complexities:
small-reads rbyd-lookup rbyd-compaction
ckcksums: O(b^2) O(b log b) O(b^2 log b)
ckredund*: O(log_b(n) + xb) O(log b) O(b log b)
eccbd*: O(b) O(log b) O(b log b)
* theoretical
We've already seen that O(b^2) compactions turns a performance problem
into a tractability problem, so I think O(b^2 log b) compactions will be
a bit too much for most applications.
We can already seen this in our test_ck_ckcksums_* tests (which do pass
by the way!). Compare to test_ck_ckprogs_*, which is basically the same
set of tests:
test_ck_ckprogs_*: 6.08s
test_ck_ckcksums_*: 64.88s
Or consider test_rbyd with/without ckcksums:
test_rbyd: 12.21s
test_rbyd+ckcksums: 389.94s
Still, ckcksums is an interesting proof-of-concept, and does manage to
close the checksum-read-hole.
---
Like ckprogs/ckfetches/ckparity/etc, ckcksums is an opt-in feature,
requiring both 1. defining LFS_CKCKSUMS and 2. passing LFS_M_CKCKSUMS at
mount time.
Like ckparity, ckcksums requires a significant code and stack increase
to track ck info in lfsr_data_t:
code stack
before: 36416 2616
yes-ckcksums: 38872 (+6.7%) 3176 (+21.4%)
no-ckcksums: 36416 (+0.0%) 2616 (+0.0%)
It's interesting to note how this compares to all of the current
ck-modes, though each has their own set of tradeoffs:
code stack
default: 36416 2616
ckprogs: 36468 (+0.1%) 2616 (+0.0%)
ckfetches: 36666 (+0.7%) 2648 (+1.2%)
ckparity: 37996 (+4.3%) 3040 (+16.2%)
ckcksums: 38872 (+6.7%) 3176 (+21.4%)
---
Note that even though ckcksums is opt-in, it may still be worth removing
from the codebase in the future, for a couple reasons:
- Every feature, even if unused, adds developer/maintenance burden.
- Ck info is particularly messy with how it interacts with all
lfsr_data_t APIs. Though getting rid of ck info would also require
getting rid of ckparity.
- It's possible for a user to see ckcksums in the codebase,
misunderstand its tradeoffs, enable it, and get the impression that
littlefs itself is just unusably slow.
Ckparity is pretty flawed in littlefs, for several reasons. The biggest
one being that we can't even reliably detect single-bit errors.
But! It can still provide an extra layer of safety in a system where you
don't care about the extra code/stack cost.
And, for ckreads, performance cost...
Performance isn't a big problem for parity-checking. We can assume
metadata tags are going to relatively small (and can be controlled by
fragment_size). But for data checksums, ckreads risks O(b^2) when
performing many small reads, which can be a bit of a problem.
And since ckreads doesn't really prove anything interesting about the
system anymore, it makes sense to unbundle these two checks, rename
ckreads -> ckparity, and limit it to only checking parity bits.
This way, you can enable ckparity for a bit of extra safety, with a
code/stack cost hit, but without sacrificing performance.
---
I was hoping more code/stack savings, but since we still need to track
parity context in lfsr_data_t, and still need to intercept bd_read/cmp/
cpy calls that reference metadata, we end up needing to keep most of
the ck circuitry around:
code stack
default before: 36464 2672
default after: 36464 (+0.0%) 2672 (+0.0%)
code stack
ckparity before: 38036 3080
ckparity after: 38024 (-0.0%) 3080 (+0.0%)
We even end up still tracking checksum context for bptrs! Maybe we
should just go ahead and add ckcksums as a joke...
Ckfetches implements what might be your first idea on how to check
checksums in a filesystem: Check each block/mdir on first access
(fetch) to make sure the data is sound.
Unfortunately, there are two problems with this approach, both which
come from the fact that blocks are big and can't fit in RAM:
1. We still have a checksum-read hole.
We can't keep a whole block around in RAM, so reads after a fetch may
need to reread from disk, at which point new bit-errors may slip in
undetected.
This is especially problematic for traversing our rbyds, which
involves a lot of small reads in a block.
2. Ckfetches may have a surprisingly negative performance impact.
Consider the case of reading a large file with a bunch of small
reads. Because we don't cache blocks, each read may need a btree
lookup, and a full block fetch. On paper this can quickly end up
O(b^2), which is not great.
Though this is helped by the file buffer. It will be interesting to
benchmark and see if this theoretical O(b^2) translates to poor
performance in practice.
Note ckreads has this same performance issue.
Still, despite these problems, ckfetches may be useful for cases where
you just want an extra layer of safety, or don't care about the tiny
chance an error is introduced between a fetch an subsequent read.
---
Like ckprogs/ckreads, ckfetches is an opt-in feature, and requires both
1. defining LFS_CKFETCHES, and 2. passing LFS_M_CKFETCHES during mount.
This is a bit of a quick implementation to get testing in place, so the
code cost is probably higher than strictly necessary. If we can refactor
the code internally to avoid all the duplicate lfsr_rbyd_fetchck/
lfsr_bptr_ck calls, we can probably bring this down a bit:
code stack
before: 36428 2680
yes-ckfetches: 36848 (+1.2%) 2680 (+0.0%)
no-ckfetches: 36428 (+0.0%) 2680 (+0.0%)
Oh, and also added lfs_emubd_flipbit to allow tests to manually flip
bits themselves. LFS_EMUBD_BADBLOCK_PROGFLIP is quick to find the above
mentioned checksum-read hole.
This could be done manually with read+erase+prog, but no reason to make
it harder than it needs to be.
So just like ckreads, ckprogs is now opt-in, requiring both 1. defining
LFS_CKPROGS at compile-time, and 2. passing the LFS_M_CKPROGS flag
during lfsr_mount.
_Unlike_ ckreads, ckprogs is actually a very lightweight feature. So the
difference between compiling with/without ckprogs is really quite small:
code stack
before: 36480 2680
yes-ckprogs: 36480 (+0.0%) 2680 (+0.0%)
no-ckprogs: 36428 (-0.1%) 2680 (+0.0%)
It's almost not worth putting behind an ifdef if not for consistency
with ckreads.
These fall out quite naturally when you consider that we call
lfsr_mountinited internally to check that our format was successful.
That being said... they don't really do anything right now since we only
write a single mdir:
- LFS_F_COMPACT - The only gc operation that _might_ actually do
something is LFS_F_COMPACT, but only if our fs config exceeds >1/2 the
block size. But I'm not sure littlefs will even be able to write file
metadata if this happens...
- LFS_F_CKMETA - We already check the only mdir by calling
lfsr_mountinited, which implicitly fetches the mrootanchor.
- LFS_F_CKDATA - We uh, don't have any data immediately after
lfsr_format. But I guess it doesn't hurt to keep this around for
consistency, it at least implies CKMETA.
Hopefully these flags will be more interesting if/when we start adding
auxiliary trees to the filesystem, otherwise they may be worth reverting
in the future...
Until then, they at least provide some consistency, and I guess a way to
triply check that format was successful.
---
This could probably be better deduplicated, but calling lfsr_fs_gc from
both lfsr_mount and lfsr_format provides a bit better code organization:
code stack
before: 36448 2680
after: 36480 (+0.1%) 2680 (+0.0%)
This is mainly to solve the weird check-hole where passing CKPROGS/
CKREADS as mount flags has no effect on lfsr_format (I mean, it'd be a
bit silly if it did somehow):
LFS_F_RDWR 0 // Format the filesystem as read and write
LFS_F_CKPROGS 0x00000010 // Check progs by reading back progged data
LFS_F_CKREADS 0x00000020 // Check reads via parity bits/checksums
This makes lfsr_format a more cumbersome interface, but I don't know if
this is necessarily a bad thing. There's always risk of data loss when
calling lfsr_format, so maybe it should be a pain to call.
At the very least, format flags may be useful in the future for
enabling/disabling format-time things such as the planned block-map,
parity-tree, etc. Though it's unclear if such significant settings
should be format flags or somehow encoded as fields in our config
struct.
---
The LFS_F_* format flags of course ended up conflicting with our
internal LFS_F_* flags, so I renamed most of the internal flags to match
the closest flag set they participate in:
- LFS_F_TYPE -> LFS_O_TYPE
- LFS_F_UNFLUSH -> LFS_O_UNFLUSH
- LFS_F_UNSYNC -> LFS_O_UNSYNC
- LFS_F_ORPHAN -> LFS_O_ORPHAN
- LFS_F_ZOMBIE -> LFS_O_ZOMBIE
- LFS_F_ORPHANS -> LFS_I_ORPHANS
- LFS_F_UNCOMPACTED -> LFS_I_UNCOMPACTED
- LFS_F_TSTATE -> LFS_T_TSTATE
- LFS_F_BTYPE -> LFS_T_BTYPE
- LFS_F_DIRTY -> LFS_T_DIRTY
- LFS_F_MUTATED -> LFS_T_MUTATED
This may make it a bit less clear which flags are a part of the public
API, vs intended only for internal use, but at the very least our asserts
in format/mount/open/etc should catch most of these mistakes.
---
Code cost ended up being pretty minimal. Actually negative. This is the
second time we're _adding_ a feature that somehow saves code, though the
reality for this one is we're really just pushing constants up into the
user's stack frame. Still, it's a good indication the cost of format
flags is small:
code stack
before: 36452 2680
after: 36448 (-0.0%) 2680 (+0.0%)
This moves all ckread-related logic behind the new opt-in compile-time
LFS_CKREADS flag. So in order to use ckreads you need to 1. define
LFS_CKREADS at compile time, and 2. pass LFS_M_CKREADS during
lfsr_mount.
This was always the plan since, even if ckreads worked perfectly, it
adds a significant amount of baggage (stack mostly) to track the
ck context of all reads.
---
This is the first non-trivial opt-in define in littlefs, so more test
framework features!
test.py and build.py now support the optional ifdef attribute, which
makes it easy to indicate a test suite/case should not be compiled when
a feature is missing.
Also interesting to note is the addition of LFS_IFDEF_CKREADS, which
solves several issues (and general ugliness) related to #ifdefs in
expression. For example:
// does not compile :( (can't embed ifdefs in macros)
LFS_ASSERT(flags == (
LFS_M_CKPROGS
#ifdef LFS_CKREADS
| LFS_M_CKREADS
#endif
))
// does compile :)
LFS_ASSERT(flags == (
LFS_M_CKPROGS
| LFS_IFDEF_CKREADS(LFS_M_CKREADS, 0)));
---
This brings us way back down to our pre-ckread levels of code/stack:
code stack
before-ckreads: 36352 2672
ckreads: 38060 (+4.7%) 3056 (+14.4%)
after-ckreads: 36428 (+0.2%) 2680 (+0.3%)
Unfortunately, we do end up with a bit more code cost than where we
started. Mainly due to code moving around to support the ckread
infrastructure:
code stack
lfsr_bd_readtag: +52 (+23.2%) +8 (+10.0%)
lfsr_rbyd_fetch: +36 (+5.0%) +8 (+6.2%, cold)
lfs_toleb128: -12 (-25.0%) -4 (-20.0%, cold)
total: +76 (+0.2%) +8 (+0.3%)
But oh well. Note that some of these changes are good even without
ckreads, such as only parsing the last ecksum tag.
Added some code, though we don't _really_ care:
code stack
before: 37872 3048
after: 38060 (+0.5%) 3056 (+0.3%)
Also interesting to note the difference in testing time, this highlights
_some_ of the performance cost of ckreads:
with ckreads: 1135.92s
without ckreads: 821.24s
It was a bit tricky to figure out what this should look like.
Traditionally, filesystems tend to fallback to readonly if they detect
unsupported wcompat (ro_compat) flags or similar config mismatch.
We could do something similar in littlefs, but since we default to
asserting on writes to readonly objects for smaller code size, this
would be really weird and hard to use from a users perspective...
Instead, lfsr_mount returns LFS_ERR_NOTSUP on encountering wcompat-
mismatch in RDWR mode, but _not_ RDONLY mode. This allows the common
rdonly-fallback pattern to be implemented on the user's side of things,
similar to the common format-fallback pattern:
int err = lfsr_mount(&lfs, LFS_M_RDWR, &cfg);
if (err && err != LFS_ERR_NOTSUP) {
return err;
}
if (err == LFS_ERR_NOTSUP) {
err = lfsr_mount(&lfs, LFS_M_RDONLY, &cfg);
if (err) {
return err;
}
}
Note that lfsr_mount may still return LFS_ERR_NOTSUP if it encounters
rcompat-flags, even with RDONLY. Detecting this state will likely need
two lfsr_mount calls with the current API, but I don't think that will
be a big deal.
The main benefit of this scheme is that it is quite cheap thanks to
pushing the fallback logic on the user:
code stack
before: 36356 2664
after: 36396 (+0.1%) 2664 (+0.0%)
One missing puzzle piece here is how do you upgrade the filesystem? But I
think the lesson from the on-disk v2.0 -> v2.1 version bump is that this
should really be an explicit function (lfsr_fs_upgrade?). If explicit
and stand-alone, like lfsr_format, we shouldn't need a weird pseudo-
rdonly mode at all.
These simply imply LFS_O_FLUSH/SYNC on all open writable files.
LFS_M_SYNC is equivalent to MS_SYNCHRONOUS in Linux/etc, while
LFS_M_FLUSH is just provided for consistency.
As pure conveniences, these may seem a bit out of scope for littlefs,
except they are _very_ cheap:
code stack
before: 36356 2664
after: 36356 (+0.0%) 2664 (+0.0%)
Ok, they're not _completely_ free! It just turns out they cost 8 bytes,
and a bit of simplification around flag checking in lfsr_mount saved
8 bytes:
code stack
before: 36356 2664
m_flush/sync: 36364 (+0.0%) 2664 (+0.0%)
mount-no-mask: 36356 (+0.0%) 2664 (+0.0%)
These are basically the same as lfsr_fs_ckmeta/ckdata but limited to a
single file. They may be useful when you need to validate a file but
don't want to bother validating the entire filesystem:
// Check a file for metadata errors
int lfsr_file_ckmeta(lfs_t *lfs, lfsr_file_t *file);
// Check a file for metadata + data errors
int lfsr_file_ckdata(lfs_t *lfs, lfsr_file_t *file);
I've also added test_ck to test these and added some more
lfsr_fs_ckmeta/ckdata tests there. These currently just test simple
full-block clobbering, but we should eventually test more interesting
error patterns.
Unfortunately lfsr_file_ckmeta/ckdata can't reuse the internal
lfsr_mtree_traverse in quite the same way lfsr_fs_ckmeta/ckdata can, so
they're actually a bit more expensive. Though keep in mind with
link-time gc you won't pay the cost unless you call these functions:
code stack
before: 36024 2696
after: 36368 (+1.0%) 2664 (-1.2%)
Oh, and the multiple calls to lfsr_btree/bshrub_traverse apparently
uninlined it out of lfsr_mtree_traverse, saving the stack cost in the
stack hot-path... Yay?
These tell littlefs to do the relevant gc work during mount, which may
be more convenient than calling lfsr_mount and then lfsr_fs_gc.
It also implicitly tears down the filesystem on error, which you can
imagine would be quite useful for LFS_M_CKMETA/LFS_M_CKDATA.
Some flags are more useful here than other (is LFS_M_LOOKAHEAD/COMPACT
really useful?), but since we just pass these directly to our traversal
APIs, we might as well support all of them for consistency.
Also note that since these only change mount's behavior, and have no
effect on the rest of the filesystem, these LFS_M_* flags don't have
related LFS_I_* flags and are not returned by lfsr_fs_stat.
---
This added quite a chunk of code, considering that this is entirely for
convenience:
code stack
before: 35932 2680
after: 36280 (+1.0%) 2680 (+0.0%)
But I think this is mostly because our low-level traversal state is
relatively costly to manage. It may be possible to deduplicate this a
bit better...
This has been a long-time coming, mount flags are just too useful for
configuring a filesystem at runtime.
Currently this is limited to LFS_M_RDONLY and LFS_M_CKPROGS, but there
are a few more planned in the future:
LFS_M_RDWR = 0x0000, // Mount the filesystem as read and write
LFS_M_RDONLY = 0x0001, // Mount the filesystem as readonly
LFS_M_STRICT* = 0x0002, // Error if on-disk config does not match
LFS_M_FORCE* = 0x0004, // Ignore compat flags, mount readonly
LFS_M_FORCEWITHRECKLESSABANDON*
= 0x0008, // Ignore compat flags, mount read write
LFS_M_CKPROGS = 0x0010, // Check progs by reading back progged data
LFS_M_CKREADS* = 0x0020, // Check reads via checksums
* Hypothetical
As a convenience, we also return mount flags in the struct lfs_fsinfo's
flags field as their relevant LFS_I_* variants. Though only to match
statvfs, and only because it's cheap, littlefs's API is low-level and we
should expect users to know what flags they passed to lfsr_mount.
As for the new mount flags:
- LFS_M_RDONLY - For consistency with existing APIs, this just asserts
on write operations, which makes it a bit useless... But the info flag
LFS_I_RDONLY may be useful for falling back to a readonly mode if
we encounter on-disk compat issues.
At least if implement the theoretical LFS_UNTRUSTED_USER mode
LFS_M_RDONLY could become a runtime error.
- LFS_M_RDWR - This really just exists to compliment LFS_M_RDONLY and to
match LFS_O_RDONLY/LFS_O_RDWR. It's just an alias for 0, and I don't
think there will ever be a reason to make it non-0 (but I can always
be wrong!).
- LFS_M_CKPROGS - This replaces the check_progs config option and avoids
using a full byte to store a bool.
We should probably also have a compile-time option to compile this out
(LFS_NO_CKPROGS?), but that's a future thing to do.
This ended up adding a surprising bit of code, considering we're just
moving flags around, and noise in lfs_alloc added a bit of stack again:
code stack
before: 35880 2672
after: 35932 (+0.1%) 2680 (+0.3%)
Christopher Haster