TLDR: This drops the idea of different bmap strategies/modes, and sorts
out most of the compile-time/runtime conditional bmap interactions.
---
Motivation: Benchmarking (at least up to the 32-bit word limit) has
shown the bmap will unlikely be a significant bottleneck, even on large
disks. The largest disks tend to be NAND, and NAND's ridiculous block
size limits pressure on block allocation.
There are still concerns for areas I haven't measured yet:
- SD/eMMC/FTL - Small blocks, so more pressure on block allocation. In
theory the logical block size can be artificially increased, but this
comes with a granularity tradeoff.
- I've only measured throughput, latency is a whole other story.
However, users have reported lfs3_fs_gc is useful for mitigating this,
so maybe latency is less of a concern now?
But while there may still be room for improvement via alternative bmap
strategies, the risk a concerning amount of complexity. Yes,
configuration gets more complicated, but the real issue is any bmap
strategies that try to track _deallocations_ (the original idea being
treediffing) risk falling leaking blocks if all cases aren't covered.
The current "bmap cache" strategy strikes a really nice balance where it
reduces _amortized_ block allocation -> ~O(log n) without RAM, while
retaining the safe, bug-resistant, single-source-of-truth properties
that come with lookahead-based allocation.
---
So, long story short, dropping other strategies, and now the presence of
the bmap is a boolean flag.
This is also the first format-specific flag:
- Define LFS3_BMAP to enable the bmap logic, but note by default the
bmap will still not be used.
- Define LFS3_YES_BMAP to force the bmap to be used.
- With LFS3_BMAP, passing LFS3_F_GBMAP to lfs3_format will include the
on-disk block-map.
- No flag is needed during mount, the presence of the bmap is determined
by the on-disk wcompat flags (LFS3_WCOMPAT_GBMAP). This also prevents
rw mounting if the bmap is not supported, but rdonly mounting is
allowed.
- Users can check if the bmap is in use via lfs3_fs_stat, which reports
LFS3_I_GBMAP in the flags field.
There's still some missing pieces, but these will be a bit more
involved:
- lfs3_fs_grow needs to be made bmap aware!
- We probably want something like lfs3_fs_mkgbmap and lfs3_fs_rmgbmap to
allow converting between bmap backed/not-backed filesystem images.
Code changes minimal:
code stack ctx
before: 37172 2352 684
after: 37172 (+0.0%) 2352 (+0.0%) 684 (+0.0%)
code stack ctx
bmap before: 38844 2456 800
bmap after: 38852 (+0.0%) 2456 (+0.0%) 800 (+0.0%)
Now that lfs3_alloc_ckpoint is more complicated, and can error, it makes
sense for lfs3_alloc_ckpoint to be implied by lfs3_mdir_commit.
Most lfs3_mdir_commit calls represent an atomic transaction from one
state -> another, so this saves a bit of code:
code stack ctx
before: 36912 2368 684
after: 36836 (-0.2%) 2368 (+0.0%) 684 (+0.0%)
code stack ctx
bmap before: 38512 2400 812
bmap after: 38436 (-0.2%) 2400 (+0.0%) 812 (+0.0%)
The notable exception being bshrub-related commits in
lfs3_bshrub_commitroot_. Bshrub commits are trying to resolve an
in-flight btree, so the relevant blocks are very much _not_ at rest.
---
I've been hesitant to adopt this mostly just because it makes the
lfs3_mdir_commit* names even more of a mess:
- lfs3_mdir_commit__ -> lfs3_mdir_commit___
- lfs3_mdir_commit_ -> lfs3_mdir_commit__
- lfs3_mdir_commit -> lfs3_mdir_commit_
- added lfs3_mdir_commit
- lfs3_mdir_compact -> lfs3_mdir_compact_
- add lfs3_mdir_compact
- lfs3_mdir_alloc__ -> lfs3_mdir_alloc___
- lfs3_mdir_estimate__ -> lfs3_mdir_estimate___
- lfs3_mdir_swap__ -> lfs3_mdir_swap___
The main change is error propagation in lfs3_alloc_ckpoint. Since
lfs3_alloc_ckpoint writes to disk during bmap rebuilds, it can now fail
in all sorts of ways. Fortunately lfs3_alloc_ckpoint should only ever be
called by write operations, where these errors are be expected.
With bmap rebuild errors now reported correctly, this unblocks most of
the remaining test TODOs:
- Passing test_badblocks
- Passing test_ck
- Passing test_trvs
With this, LFS3_YES_BMAP is now passing all but two tests, which are
still ifndef-disabled as a temporary measure:
- test_btree - We make some low-level assumptions about the lookahead
allocator when testing btrees. It's probably not worth trying to get
this passing with the bmap allocator.
- test_grow - This one does need fixing! We currently don't update
on-disk bmaps correctly when growing the filesystem.
Code changes minimal:
code stack ctx
before: 36912 2368 684
after: 36912 (+0.0%) 2368 (+0.0%) 684 (+0.0%)
code stack ctx
bmap before: 38456 2400 812
bmap after: 38512 (+0.1%) 2400 (+0.0%) 812 (+0.0%)
At least at a proof-of-concept level, there's still a lot of cleanup
needed.
To make things work, lfs3_alloc_ckpoint now takes an mdir, which
provides the target for gbmap gstate updates.
When the bmap is close to empty (configurable via bmap_scan_thresh), we
opportunistically rebuild it during lfs3_alloc_ckpoints. The nice thing
about lfs3_alloc_ckpoint is we know the state of all in-flight blocks,
so rebuilding the bmap just requires traversing the filesystem + in-RAM
state.
We might still fall back to the lookahead buffer, but in theory a well
tuned bmap_scan_thresh can prevent this from becoming a bottleneck (at
the cost of more frequent bmap rebuilds).
---
This is also probably a good time to resume measuring code/ram costs,
though it's worth repeating the above note about the bmap work still
needing cleanup:
code stack ctx
before: 36840 2368 684
after: 36920 (+0.2%) 2368 (+0.0%) 684 (+0.0%)
Haha, no, the bmap isn't basically free, it's just an opt-in features.
With -DLFS3_YES_BMAP=1:
code stack ctx
no bmap: 36920 2368 684
yes bmap: 38552 (+4.4%) 2472 (+4.4%) 812 (+18.7%)
This is an indulgence to simplify the upcoming auxiliary btree work.
Brings back the previously-reverted per-btree leaf caches, where each
lfs3_btree_t keeps track of two rbyds: The root and the most recently
accessed leaf.
At the surface level, this optimizes repeated access to the same btree
leaf. A common pattern for a number of littlefs's operations that has
proven tricky to manually optimize:
- Btree iteration
- Pokes for our crystalization heuristic
- Checksum collision resolution for dids and (FUTURE) ddkeys
- Related rattrs attached to a single bid
But the real motivation is to drop lfs3_btree_*lookupleaf and simplify
the internal APIs. If repeated lfs3_btree_lookup*s are already
efficient, there's no reason for extra leaf-level APIs, and in theory
any logic that interacts with btrees will be simpler.
---
This comes at a cost (humorously about the same amount as the
tag-returning refactor, if you ignore the extra 28 bytes of ctx).
Unsurprisingly, increasing the size of lfs3_btree_t has the biggest
impact on stack and ctx:
code stack ctx
before: 36084 2336 656
after: 36784 (+1.9%) 2400 (+2.7%) 684 (+4.3%)
Also note from the previous commit messages: Btree leaf caching has
resulted in surprisingly little performance improvement for our current
benchmarks + implementation. It turns out if you're dominated by write
cost, optimizing btree lookups -- which already skip rbyd fetches, has
barely noticeable impact.
---
A note on reverting!
Eventually (after the auxiliary btree work) it will probably make sense
to revert this -- or at least provide a non-leaf-caching build for
code/RAM sensitive users.
I don't think this should be reverted as-is. Instead, I think we should
allow the option to just disable the leaf cache, while keeping the
simpler internal API. This would give us the best of all three worlds:
- A small code/RAM option
- Optimal btree iteration/nearby-lookup performance
- Simpler internal APIs
The only reason this isn't already implemented is because I want to
avoid fragmenting the codebase further while we're still in development
mode.
Note this includes both the lfs3_config -> lfs3_cfg structs as well as
the LFS3_CONFIG -> LFS3_CFG include define:
- LFS3_CONFIG -> LFS3_CFG
- struct lfs3_config -> struct lfs3_cfg
- struct lfs3_file_config -> struct lfs3_file_cfg
- struct lfs3_*bd_config -> struct lfs3_*bd_cfg
- cfg -> cfg
We were already using cfg as the variable name everywhere. The fact that
these names were different was an inconsistency that should be fixed
since we're committing to an API break.
LFS3_CFG is already out-of-date from upstream, and there's plans for a
config rework, but I figured I'd go ahead and change it as well to lower
the chances it gets overlooked.
---
Note this does _not_ affect LFS3_TAG_CONFIG. Having the on-disk vs
driver-level config take slightly different names is not a bad thing.
- test_traversal -> test_trvs
- lfs3_traversal_t -> lfs3_trv_t
- lfs3_btraversal_t -> lfs3_btrv_t
- t -> trv
- bt -> btrv
- lfs3_traversal_* -> lfs3_trv_*
- lfs3_btraversal_* -> lfs3_btrv_*
The traversal type is becoming one of the more fundamental types in
littlefs, and if DIR and REG both get shortened names, it makes sense
for TRV to have one as well.
This also removes the temptation to use t for traversals, which is
probably an even worse name.
---
Note that lfs3_btree_traverse, lfs3_mtree_traverse, etc, remain
unaffected. This may change in the future, but it's interesting to note
that verbs seem to need much less typing than nouns.
Christopher Haster