For some reason emubd had both a path argument to lfs3_emubd_create, and
a disk_path config option, with only the disk_path actually being used.
But the real curiosity is why did GCC only starting warning about it
when copied to kiwibd? path is clearly unused in lfs3_emubd_createcfg,
but no warning...
---
Anyways, not sure which one is a better API, but we definitely don't
need two APIs, so eeny meeny miny moe...
Went ahead and chose the lfs3_emubd_create path param for some
consistency with filebd.
Long story short: %zd != %jd!
This was a simple oversight when writing the bench printing code, and
easy to miss on x86_64 and other modern PCs, but the mistake becomes
very apparent when trying to bench under qemu in thumb mode!
Note --list-suite-paths was already skipping case-less suites! I think
only -Y/--summary was an outlier.
This is consistent with test.py's matching of suite ids when no cases
are found (test_runner itself doesn't really care, it just reports no
matching cases). Though we do still compile case-less suites and include
them in the test_suites array, which may be confusing in the future.
Note this includes both the lfs3_config -> lfs3_cfg structs as well as
the LFS3_CONFIG -> LFS3_CFG include define:
- LFS3_CONFIG -> LFS3_CFG
- struct lfs3_config -> struct lfs3_cfg
- struct lfs3_file_config -> struct lfs3_file_cfg
- struct lfs3_*bd_config -> struct lfs3_*bd_cfg
- cfg -> cfg
We were already using cfg as the variable name everywhere. The fact that
these names were different was an inconsistency that should be fixed
since we're committing to an API break.
LFS3_CFG is already out-of-date from upstream, and there's plans for a
config rework, but I figured I'd go ahead and change it as well to lower
the chances it gets overlooked.
---
Note this does _not_ affect LFS3_TAG_CONFIG. Having the on-disk vs
driver-level config take slightly different names is not a bad thing.
This one was a bit more involved.
Removes utils that are no longer useful, and made sure some of the
name/API changes over time are adopted consistently:
- lfs_npw2 -> lfs_nlog2
- lfs_tole32_ -> lfs_tole32
- lfs_fromle32_ -> lfs_fromle32
Also did another pass for lfs_ prefixes on mem/str functions. The habit
to use the naked variants of these is hard to break!
This was the one piece needed to be able to replace amor.py with csv.py.
The missing feature in csv.py is the ability to keep track of a
running-sum, but this is a bit of a hack in amor.py considering we
otherwise view csv entries as unordered.
We could add a running-sum to csv.py, or instead, just include a running
sum as a part of our bench output. We have all the information there
anyways, and if it simplifies the mess that is our csv scripts, that's a
win.
---
This also replaces the bench "meas", "iter", and "size" fields with the
slightly simpler "m" (measurement? metric?) and "n" fields. It's up to
the specific benchmark exactly how to interpret "n", but one field is
sufficient for existing scripts.
This moves all ckread-related logic behind the new opt-in compile-time
LFS_CKREADS flag. So in order to use ckreads you need to 1. define
LFS_CKREADS at compile time, and 2. pass LFS_M_CKREADS during
lfsr_mount.
This was always the plan since, even if ckreads worked perfectly, it
adds a significant amount of baggage (stack mostly) to track the
ck context of all reads.
---
This is the first non-trivial opt-in define in littlefs, so more test
framework features!
test.py and build.py now support the optional ifdef attribute, which
makes it easy to indicate a test suite/case should not be compiled when
a feature is missing.
Also interesting to note is the addition of LFS_IFDEF_CKREADS, which
solves several issues (and general ugliness) related to #ifdefs in
expression. For example:
// does not compile :( (can't embed ifdefs in macros)
LFS_ASSERT(flags == (
LFS_M_CKPROGS
#ifdef LFS_CKREADS
| LFS_M_CKREADS
#endif
))
// does compile :)
LFS_ASSERT(flags == (
LFS_M_CKPROGS
| LFS_IFDEF_CKREADS(LFS_M_CKREADS, 0)));
---
This brings us way back down to our pre-ckread levels of code/stack:
code stack
before-ckreads: 36352 2672
ckreads: 38060 (+4.7%) 3056 (+14.4%)
after-ckreads: 36428 (+0.2%) 2680 (+0.3%)
Unfortunately, we do end up with a bit more code cost than where we
started. Mainly due to code moving around to support the ckread
infrastructure:
code stack
lfsr_bd_readtag: +52 (+23.2%) +8 (+10.0%)
lfsr_rbyd_fetch: +36 (+5.0%) +8 (+6.2%, cold)
lfs_toleb128: -12 (-25.0%) -4 (-20.0%, cold)
total: +76 (+0.2%) +8 (+0.3%)
But oh well. Note that some of these changes are good even without
ckreads, such as only parsing the last ecksum tag.
These really shouldn't be used all that often. Test filters are usually
used to protect against invalid test configurations, so if you bypass
test filters, expect things to fail!
But some filters just prevent test cases from taking too long. In these
cases being able to manually bypass the filter is useful for debugging/
benchmarking/etc...
The main star of the show is the adoption of __builtin_trap() for
aborting on assert failure. I discovered this GCC/Clang extension
recently and it integrates much, _much_ better with GDB.
With stdlib's abort(), GDB drops you off in several layers of internal
stdlib functions, which is a pain to navigate out of to get to where the
assert actually happened. With __builtin_trap(), GDB stops immediately,
making debugging quick and easy.
This is great! The pain of debugging needs to come from understanding
the error, not just getting to it.
---
Also tweaked a few things with the internal print functions to make
reading the generated source easier, though I realize this is a rare
thing to do.
Motivation:
- Debuggability. Accessing the current test/bench defines from inside
gdb was basically impossible for some dumb macro-debug-info reason I
can't figure out.
In theory, GCC provides a .debug_macro section when compiled with -g3.
I can see this section with objdump --dwarf=macro, but somehow gdb
can't seem to find any definitions? I'm guess the #line source
remapping is causing things to break somehow...
Though even if macro-debugging gets fixed, which would be valuable,
accessing defines in the current test/bench runner can trigger quite
a bit of hidden machinery. This risks side-effects, which is never
great when debugging.
All of this is quite annoying because the test/bench defines is
usually the most important piece of information when debugging!
This replaces the previous hidden define machinery with simple global
variables, which gdb can access no problem.
- Also when debugging we no longer awkwardly step into the test_define
function all the time!
- In theory, global variables, being a simple memory access, should be
quite a bit faster than the hidden define machinery. This does matter
because running tests _is_ a dev bottleneck.
In practice though, any performance benefit is below the noise floor,
which isn't too surprising (~630s +-~20s).
- Using global variables for defines simplifies the test/bench runner
quite a bit.
Though some of the previous complexity was due to a whole internal
define caching system, which was supposed to lazily evaluate test
defines to avoid evaluating defines we don't use. This all proved to
be useless because the first thing we do when running each test is
evaluate all defines to generate the test id (lol).
So now, instead of lazily evaluating and caching defines, we just
generate global variables during compilation and evaluate all defines
for each test permutation immediately before running.
This relies heavily on __attribute__((weak)) symbols, and lets the
linker really shine.
As a funny perk this also effectively interns all test/bench defines by
the address of the resulting global variable. So we don't even need to
do string comparisons when mapping suite-level defines to the
runner-level defines.
---
Perhaps the more interesting thing to note, is the change in strategy in
how we actually evaluate the test defines.
This ends up being a surprisingly tricky problem, due to the potential
of mutual recursion between our defines.
Previously, because our define machinery was lazy, we could just
evaluate each define on demand. If a define required another define, it
would lazily trigger another evaluation, implicitly recursing through
C's stack. If cyclic, this would eventually lead to a stack overflow,
but that's ok because it's a user error to let this happen.
The "correct" way, at least in terms of being computationally optimal,
would be to topologically sort the defines and evaluate the resulting
tree from the leaves up.
But I ain't got time for that, so the solution here is equal parts
hacky, simple, and effective.
Basically, we just evaluate the defines repeatedly until they stop
changing:
- Initially, mutually recursive defines may read the uninitialized
values of their dependencies, and end up with some arbitrarily wrong
result. But as the defines are repeatedly evaluated, assuming no
cycles, the correct results should eventually bubble up the tree until
all defines converge to the correct value.
- This is O(n*e) vs O(n+e), but our define graph is usually quite
shallow.
- To prevent non-halting, we error after an arbitrary 1000 iterations.
If you hit this, it's likely because there is a cycle in the define
graph.
This is runtime configurable via the new --define-depth flag.
- To keep things consistent and reproducible, we zero initialize all
defines before the first evaluation.
I don't think this is strictly necessary, but it's important for the
test runner to have the exact same results on every run. No one wants
a "works on my machine" situation when the tests are involved.
Experimentation shows we only need an evaluation depth of 2 to
successfully evaluate the current set of defines:
$ ./runners/test_runner --list-defines --define-depth=2
And any performance impact is negligible (~630s +-~20s).
So:
switch (cond) {
case 0:;
// first case
break;
case 1:;
// second case
break;
default:;
// default case
break;
}
This basically adopts our current label style for the case statements in
switch statements. It initially looks like quite a monstrosity, but I
think it does a good job at highlighting that case statements in C are
no safer than labels and gotos.
I would not use this style in a language with better scoping in switch
statements.
I'd prefer not to use switch statements, their scoping rules in C are
just too error-prone, and the compiler usually optimizes things out
anyways, but there are some places where switch statements are clearly
the correct organization -- state machines such as lfsr_traversal_read
for example.
If you're curious about the ':;' ending, this is used in our current
style for labels to avoid "declaration is not a statement" warnings.
Which I think is just a bit of leftover from C historically not having
mixed statements/declarations.
So:
x = (cond) ? yes : no;
Where there are always parentheses around the condition, even if not
required for disambiguity. Additional parentheses are always allowed,
but the parenthesized condition helps signal that a ternary operator is
coming earlier in the expression.
This style has grown on me as I think it helps code readability. It
reminds me of the required parentheses for if/while statements.
Might as well adopt codebase-wide.
The previous encoding was a bit problematic with our linear and log
heuristics, which can grow thousands of powerlosses deep. You know you
have a problem when you're copying a test id that spans a dozen lines.
It also meant we were spending O(n^2) time just encoding powerloss ids:
before: 942.68s
after: 921.94s (-2.2%)
This new encoding takes advantage of the unused characters in our leb16
encoding, with an 'x' prefix indicating linear-heuristic powerlosses
and a 'y' prefix indicating log-heuristic powerlosses ('w' is used for
negative leb16s).
Before:
- explicit: 42q2q2
- linear: 123456789abcdefg1h1i1j1k1l1m1n1o1p1q1r1s1t1u1v1
- log: 1248g1g2g4g8gg1gg2gg4gg8
After:
- explicit: 42q2q2
- linear: xg2
- log: yc
This turned out to not be all that useful.
Tests already take quite a bit to run, which is a good thing! We have a
lot of tests! 942.68s or ~15 minutes of tests at the time of writing to
be exact. But simply multiplying the number of tests by some number of
geometries is heavy handed and not a great use of testing time.
Instead, tests where different geometries are relevant can parameterize
READ_SIZE/PROG_SIZE/BLOCK_SIZE at the suite level where needed. The
geometry system was just another define parameterization layer anyways.
Testing different geometries can still be done in CI by overriding the
relevant defines anyways, and it _might_ be interesting there.
This is based on how bench.py/bench_runners have actually been used in
practice. The main changes have been to make the output of bench.py more
readibly consumable by plot.py/plotmpl.py without needing a bunch of
hacky intermediary scripts.
Now instead of a single per-bench BENCH_START/BENCH_STOP, benches can
have multiple named BENCH_START/BENCH_STOP invocations to measure
multiple things in one run:
BENCH_START("fetch", i, STEP);
lfsr_rbyd_fetch(&lfs, &rbyd_, rbyd.block, CFG->block_size) => 0;
BENCH_STOP("fetch");
Benches can also now report explicit results, for non-io measurements:
BENCH_RESULT("usage", i, STEP, rbyd.eoff);
The extra iter/size parameters to BENCH_START/BENCH_RESULT also allow
some extra information to be calculated post-bench. This infomation gets
tagged with an extra bench_agg field to help organize results in
plot.py/plotmpl.py:
- bench_meas=<meas>+amor, bench_agg=raw - amortized results
- bench_meas=<meas>+div, bench_agg=raw - per-byte results
- bench_meas=<meas>+avg, bench_agg=avg - average over BENCH_SEED
- bench_meas=<meas>+min, bench_agg=min - minimum over BENCH_SEED
- bench_meas=<meas>+max, bench_agg=max - maximum over BENCH_SEED
---
Also removed all bench.tomls for now. This may seem counterproductive in
a commit to improve benchmarking, but I'm not sure there's actual value
to keeping bench cases committed in tree.
These were alway quick to fall out of date (at the time of this commit
most of the low-level bench.tomls, rbyd, btree, etc, no longer
compiled), and most benchmarks were one-off collections of scripts/data
with results too large/cumbersome to commit and keep updated in tree.
I think the better way to approach benchmarking is a seperate repo
(multiple repos?) with all related scripts/state/code and results
committed into a hopefully reproducible snapshot. Keeping the
bench.tomls in that repo makes more sense in this model.
There may be some value to having benchmarks in CI in the future, but
for that to make sense they would need to actually fail on performance
regression. How to do that isn't so clear. Anyways we can always address
this in the future rather than now.
Like many prngs, xorshift breaks down when the internal state is 0. The
common fix is to explicitly check for this and replace with a 1 when
this happens (usually when seeding, in this API we have to check every
update, this is less efficient but I don't think we really care).
As a slight tweak, this now checks for 0 but replaces it with -1. This
makes seed=0 different from seed=1, which is nice when using
seed=range(0,n) in tests/benches.
So now instead of needing:
./scripts/test.py ./runners/test_runner test_dtree
You can just do:
./scripts/test.py test_dtree
Or with an explicit path:
./scripts/test.py -R./runners/test_runner test_dtree
This makes it easier to run the script manually. And, while there may be
some hiccups with the implicit relative path, I think in general this will
make the test/bench scripts easier to use.
There was already an implicit runner path, though only if the test suite
was completely omitted. I'm not sure that would ever have actually
been useful...
---
Also increased the permutation field size in --list-*, since I noticed it
was overflowing.
- coalesce_size - The amount of data allowed to coalesce into single
data entries.
- crystallize_size - How much data is allowed to be written to btree
inner nodes before needing to be compacted into a block.
Also deduplicated the test config is something I've been wanting to do
for a while. It doesn't make sense to need to modify several different
instantiations of lfs_config every time a config option is added or
removed...
Currently limited to inlined files and only simpler truncate-writes.
But still this lets us test file creation/deletion.
This is also enough logic to make it clear that, even though we have
some powerful high-level primitives, mapping file operations onto these
is still going to be non-trivial.
The previous system of relying on test name prefixes for ordering was
simple, but organizing tests by dependencies and topologically sorting
during compilation is 1. more flexible and 2. simplifies test names,
which get typed a lot.
Note these are not "hard" dependencies, each test suite should work fine
in isolation. These "after" dependencies just hint an ordering when all
tests are ran.
As such, it's worth noting the tests should NOT error of a dependency is
missing. This unfortunately makes it a bit hard to catch typos, but
allows faster compilation of a subset of tests.
---
To make this work the way tests are linked has changed from using custom
linker section (fun linker magic!) to a weakly linked array appended to
every source file (also fun linker magic!).
At least with this method test.py has strict control over the test
ordering, and doesn't depend on 1. the order in which the linker merges
sections, and 2. the order tests are passed to test.py. I didn't realize
the previous system was so fragile.
This marks internal tests/benches (case.in="lfs.c") with an otherwise-unused
flag that is printed during --summary/--list-*. This just helps identify which
tests/benches are internal.
TEST_PERMUTATION/BENCH_PERMUTATION make it possible to map an integer to
a specific permutation efficiently. This is helpful since our testing
framework really only parameterizes single integers.
The exact implementation took a bit of trial and error. It's based on
https://stackoverflow.com/a/7919887 and
https://stackoverflow.com/a/24257996, but modified to run in O(n) with
no extra memory. In the discussion it seemed like this may not actually
be possible for lexicographic ordering of permutations, but fortunately
we don't care about the specific ordering, only the reproducibility.
Here's how it works:
1. First populate an array with all numbers 0-n.
2. Iterate through each index, selecting only from the remaining
numbers based on our current permutation.
.- i%rem --.
v .----+----.
[p0 p1 |-> r0 r1 r2 r3]
Normally to maintain lexicographic ordering you should have to do a O(n)
shift at this step as you remove each number. But instead we can just swap
the removed number and number under the index. This effectively
shrinks the remaining part of the array, but permutes the numbers
a bit. Fortunately, since each successive permutation swaps
at the same location, the resulting permutations will be both
exhaustive and reproducible, if unintuitive.
Now permutation/fuzz tests can reproduce specific failures by defining
either -DPERMUTATION=x or -DSEED=x.
I wondered if walking in Python 2's footsteps was going to run into the
same issues and sure enough, memory backed iterators became unweildy.
The motivation for this change is that large ranges in tests, such as
iterators over seeds or permutations, became prohibitively expensive to
compile. This meant more iteration moving into tests with more steps to
reproduce failures. This sort of defeats the purpuse of the test
framework.
The solution here is to move test permutation generation out of test.py
and into the test runner itself. The allows defines to generate their
values programmatically.
This does conflict with the test frameworks support of sets of explicit
permutations, but this is fixed by also moving these "permutation sets"
down into the test runner.
I guess it turns out the closer your representation matches your
implementation the better everythign works.
Additionally the define caching layer got a bit of tweaking. We can't
precalculate the defines because of mutual recursion, but we can
precalculate which define/permutation each define id maps to. This is
necessary as otherwise figuring out each define's define-specific
permutation would be prohibitively expensive.
This turned out to be a bit tricky, and the scheme in bench_rbyd is
broken.
The core issue is that we don't have a distinction between physical and
logical block sizes, so we can't use a block device configured for one
geometry with a littlefs instance operating on a different geometry. For
this and other reasons we should probably have two configuration
variables in the future, but at the moment that is out of scope.
The problem with the approach in bench_rbyd, which changes the
lfs_config at runtime, is that this breaks emubd which also depends on
lfs_config due to a leaky abstraction. This causes unnoticed memory
corruption.
---
To get something working, the tests now change the underlying BLOCK_SIZE
test define before the tests are run. This starts the test with a block
device configured with a large block_size. To keep this from breaking
things the geometry definitions in the test and bench runners no longer
use default dependent definitions, instead defining everything
explicitly.
With block_size being so large, this makes some of the emubd operations
less performant, notably the --disk option for exposing block device
state during testing.
It would also be nice to use the copy-on-write backend of emubd for some
of the permutation testing, but since it operates on a block-by-block
basis, it doesn't really work when the block device is just one big
block.
- Added support for negative numbers in the leb16 encoding with an
optional 'w' prefix.
- Changed prettyasserts.py rule to .a.c => .c, allowing other .a.c files
in the future.
- Updated .gitignore with missing generated files (tags, .csv).
- Removed suite-namespacing of test symbols, these are no longer needed.
- Changed test define overrides to have higher priority than explicit
defines encoded in test ids. So:
./runners/bench_runner bench_dir_open:0f1g12gg2b8c8dgg4e0 -DREAD_SIZE=16
Behaves as expected.
Otherwise it's not easy to experiment with known failing test cases.
- Fixed issue where the -b flag ignored explicit test/bench ids.
When you add a function to every benchmark suite, you know if should
probably be provided by the benchmark runner itself. That being said,
randomness in tests/benchmarks is a bit tricky because it needs to be
strictly controlled and reproducible.
No global state is used, allowing tests/benches to maintain multiple
randomness stream which can be useful for checking results during a run.
There's an argument for having global prng state in that the prng could
be preserved across power-loss, but I have yet to see a use for this,
and it would add a significant requirement to any future test/bench runner.
Two flags introduced: -fcallgraph-info=su for stack analysis, and
-ftrack-macro-expansions=0 for cleaner prettyassert.py warnings, are
unfortunately not supported in Clang.
The override vars in the Makefile meant it wasn't actually possible to
remove these flags for Clang testing, so this commit changes those vars
to normal, non-overriding vars. This means `make CFLAGS=-Werror` and
`CFLAGS=-Werror make` behave _very_ differently, but this is just an
unfortunate quirk of make that needs to be worked around.
- Moved to Ubuntu 22.04
This notably means we no longer have to bend over backwards to
install GCC 10!
- Changed shell in gha to include the verbose/undefined flags, making
debugging gha a bit less painful
- Adopted the new test.py/test_runners framework, which means no more
heavy recompilation for different configurations. This reduces the test job
runtime from >1 hour to ~15 minutes, while increasing the number of
geometries we are testing.
- Added exhaustive powerloss testing, because of time constraints this
is at most 1pls for general tests, 2pls for a subset of useful tests.
- Limited coverage measurements to `make test`
Originally I tried to maximize coverage numbers by including coverage
from every possible source, including the more elaborate CI jobs which
provide an extra level of fuzzing.
But this missed the purpose of coverage measurements, which is to find
areas where test cases can be improved. We don't want to improve coverage
by just shoving more fuzz tests into CI, we want to improve coverage by
adding specific, intentioned test cases, that, if they fail, highlight
the reason for the failure.
With this perspective, maximizing coverage measurement in CI is
counter-productive. This changes makes it so the reported coverage is
always less than actual CI coverage, but acts as a more useful metric.
This also simplifies coverage collection, so that's an extra plus.
- Added benchmarks to CI
Note this doesn't suffer from inconsistent CPU performance because our
benchmarks are based on purely simulated read/prog/erase measurements.
- Updated the generated markdown table to include line+branch coverage
info and benchmark results.
- Fixed prettyasserts.py parsing when '->' is in expr
- Made prettyasserts.py failures not crash (yay dynamic typing)
- Fixed the initial state of the emubd disk file to match the internal
state in RAM
- Fixed true/false getting changed to True/False in test.py/bench.py
defines
- Fixed accidental substring matching in plot.py's --by comparison
- Fixed a missed LFS_BLOCk_CYCLES in test_superblocks.toml that was
missed
- Changed test.py/bench.py -v to only show commands being run
Including the test output is still possible with test.py -v -O-, making
the implicit inclusion redundant and noisy.
- Added license comments to bench_runner/test_runner
Based loosely on Linux's perf tool, perfbd.py uses trace output with
backtraces to aggregate and show the block device usage of all functions
in a program, propagating block devices operation cost up the backtrace
for each operation.
This combined with --trace-period and --trace-freq for
sampling/filtering trace events allow the bench-runner to very
efficiently record the general cost of block device operations with very
little overhead.
Adopted this as the default side-effect of make bench, replacing
cycle-based performance measurements which are less important for
littlefs.
- Changed multi-field flags to action=append instead of comma-separated.
- Dropped short-names for geometries/powerlosses
- Renamed -Pexponential -> -Plog
- Allowed omitting the 0 for -W0/-H0/-n0 and made -j0 consistent
- Better handling of --xlim/--ylim
Without this redundant permutations can easily happen with runtime
overrides because the different define layers aren't aware of each
other. This causes problems for collecting benchmark results.
These are really just different flavors of test.py and test_runner.c
without support for power-loss testing, but with support for measuring
the cumulative number of bytes read, programmed, and erased.
Note that the existing define parameterization should work perfectly
fine for running benchmarks across various dimensions:
./scripts/bench.py \
runners/bench_runner \
bench_file_read \
-gnor \
-DSIZE='range(0,131072,1024)'
Also added a couple basic benchmarks as a starting point.
Christopher Haster