This adds %i and %I as punescape modifiers for limited printing of
integers with SI prefixes:
- %(field)i - base-10 SI prefixes
- 100 => 100
- 10000 => 10K
- 0.01 => 10m
- %(field)I - base-2SI prefixes
- 128 => 128
- 10240 => 10Ki
- 0.125 => 128mi
These can also easily include units as a part of the punescape string:
- %(field)iops/s => 10Kops/s
- %(field)IB => 10KiB
This is particularly useful in plotmpl.py for adding explicit
x/yticklabels without sacrificing the automatic SI-prefixes.
The gbmap's weight is defined by the block count stored in the geometry
config field, which should always be present in valid littlefs3 images.
But our scripts routinely try to parse _invalid_ littlefs3 images when
running in parallel with benchmarks/tests (littlefs3 does _not_ support
multiple read/writers), so this was causing exceptions to be thrown.
The fix is to just assume weight=0 when the geometry field is missing.
The image isn't valid, and the gbmap is optional anyways.
The idea behind separate ctrled+unctrled airspaces was to try to avoid
multiple interpretations of the on-disk bmap, but I'm starting to think
this adds more complexity than it solves.
The main conflict is the meaning of "in-flight" blocks. When using the
"uncontrolled" bmap algorithm, in-flight blocks need to be
double-checked by traversing the filesystem. But in the "controlled"
bmap algorithm, blocks are only marked as "in-flight" while they are
truly in-flight (in-use in RAM, but not yet in use on disk).
Representing these both with the same "in-flight" state risks
incompatible algorithms misinterpreting the bmap across different
mounts.
In theory the separate airspaces solve this, but now all the algorithms
need to know how to convert the bmap from different modes, adding
complexity and code cost.
Well, in theory at least. I'm unsure separate airspaces actually solves
this due to subtleties between what "in-flight" means in the different
algorithms (note both in-use and free blocks are "in-flight" in the
unknown airspace!). It really depends on how the "controlled" algorithm
actually works, which isn't implemented/fully designed yet.
---
Long story short, due to a time crunch, I'm ripping this out for now and
just storing the current algorithm in the wcompat flags:
LFS3_WCOMPAT_GBMAP 0x00006000 Global block-map in use
LFS3_WCOMPAT_GBMAPNONE 0x00000000 Gbmap not in use
LFS3_WCOMPAT_GBMAPCACHE 0x00002000 Gbmap in cache mode
LFS3_WCOMPAT_GBMAPVFR 0x00004000 Gbmap in VFR mode
LFS3_WCOMPAT_GBMAPIFR 0x00006000 Gbmap in IFR mode
Note GBMAPVFR/IFR != BMAPSLOW/FAST! At least BMAPSLOW/FAST can share
bmap representations:
- GBMAPVFR => Uncontrolled airspace, i.e. in-flight blocks may or may
not be in use, need to traverse open files.
- GBMAPIFR => Controlled airspace, i.e. in-flight blocks are in use,
at least until powerloss, no traversal needed, but requires more bmap
writes.
- BMAPSLOW => Treediff by checking what blocks are in B but not in A,
and what blocks are in A but not in B, O(n^2), but minimizes bmap
updates.
Can be optimized with a bloom filter.
- BMAPFAST => Treediff by clearing all blocks in A, and then setting all
blocks in B, O(n), but also writes all blocks to the bmap twice even
on small changes.
Can be optimized with a sliding bitmap window (or a block hashtable,
though a bitmap converges to the same thing in both algorithms when
>=disk_size).
It will probably be worth unifying the bmap representation later (the
more algorithm-specific flags there are, the harder interop becomes for
users, but for now this opens a path to implementing/experimenting with
bmap algorithms without dealing with this headache.
This actually binds our custom write/writeln functions as methods to the
file object:
def writeln(self, s=''):
self.write(s)
self.write('\n')
f.writeln = writeln.__get__(f)
This doesn't really gain us anything, but is a bit more correct and may
be safer if other code messes with the file's internals.
This adds LFS3_o_WRSET as an internal-only 3rd file open mode (I knew
that missing open mode would come in handy) that has some _very_
interesting behavior:
- Do _not_ clear the configured file cache. The file cache is prefilled
with the file's data.
- If the file does _not_ exist and is small, create it immediately in
lfs3_file_open using the provided file cache.
- If the file _does_ exist or is not small, do nothing and open the file
normally. lfs3_file_close/sync can do the rest of the work in one
commit.
This makes it possible to implement one-commit lfs3_set on top of the
file APIs with minimal code impact:
- All of the metadata commit logic can be handled by lfs3_file_sync_, we
just call lfs3_file_sync_ with the found did+name in lfs3_file_opencfg
when WRSET.
- The invariant that lfs3_file_opencfg always reserves an mid remains
intact, since we go ahead and write the full file if necessary,
minimizing the impact on lfs3_file_opencfg's internals.
This claws back most of the code cost of the one-commit key-value API:
code stack ctx
before: 38232 2400 636
after: 37856 (-1.0%) 2416 (+0.7%) 636 (+0.0%)
before kv: 37352 2280 636
after kv: 37856 (+1.3%) 2416 (+6.0%) 636 (+0.0%)
---
I'm quite happy how this turned out. I was worried there for a bit the
key-value API was going to end up an ugly wart for the internals, but
with LFS3_o_WRSET this integrates quite nicely.
It also raises a really interesting question, should LFS3_o_WRSET be
exposed to users?
For now I'm going to play it safe and say no. While potentially useful,
it's still a pretty unintuitive API.
Another thing worth mentioning is that this does have a negative impact
on compile-time gc. Duplication adds code cost when viewing the system
as a whole, but tighter integration can backfire if the user never calls
half the APIs.
Oh well, compile-time opt-out is always an option in the future, and
users seem to care more about pre-linked measurements, probably because
it's an easier thing to find. Still, it's funny how measuring code can
have a negative impact on code. Something something Goodhart's law.
Not sure what the point of this was, I think it was copied from a d3
example svg at some point. But it forces the svg to always fit in the
window, even if this makes the svg unreadable.
These svgs tend to end up questionably large in order to fit in the most
info, so the unreadableness ends up a real problem for even modest
window sizes.
Not sure why, but this just seems more intuitive/correct. Maybe because
LFSR_TAG_NAME is always the first tag in a file's attr set:
LFSR_TAG_NAMELIMIT 0x0039 v--- ---- --11 1--1
LFSR_TAG_FILELIMIT 0x003a v--- ---- --11 1-1-
Seeing as several parts of the codebase still use the previous order,
it seems reasonable to switch back to that.
No code changes.
- codemapd3.py -> codemapsvg.py
- dbgbmapd3.py -> dbgbmapsvg.py
- treemapd3.py -> treemapsvg.py
Originally these were named this way to match plotmpl.py, but these
names were misleading. These scripts don't actually use the d3 library,
they're just piles of Python, SVG, and Javascript, modelled after the
excellent d3 treemap examples.
Keeping the *d3.py names around also felt a bit unfair to brendangregg's
flamegraph SVGs, which were the inspiration for the interactive
component. With d3 you would normally expect a rich HTML page, which is
how you even include the d3 library.
plotmpl.py is also an outlier in that it supports both .svg and .png
output. So having a different naming convention in this case makes
sense to me.
So, renaming *d3.py -> *svg.py. The inspiration from d3 is still
mentioned in the top-level comments in the relevant files.
Christopher Haster