So just like ckreads, ckprogs is now opt-in, requiring both 1. defining
LFS_CKPROGS at compile-time, and 2. passing the LFS_M_CKPROGS flag
during lfsr_mount.
_Unlike_ ckreads, ckprogs is actually a very lightweight feature. So the
difference between compiling with/without ckprogs is really quite small:
code stack
before: 36480 2680
yes-ckprogs: 36480 (+0.0%) 2680 (+0.0%)
no-ckprogs: 36428 (-0.1%) 2680 (+0.0%)
It's almost not worth putting behind an ifdef if not for consistency
with ckreads.
These fall out quite naturally when you consider that we call
lfsr_mountinited internally to check that our format was successful.
That being said... they don't really do anything right now since we only
write a single mdir:
- LFS_F_COMPACT - The only gc operation that _might_ actually do
something is LFS_F_COMPACT, but only if our fs config exceeds >1/2 the
block size. But I'm not sure littlefs will even be able to write file
metadata if this happens...
- LFS_F_CKMETA - We already check the only mdir by calling
lfsr_mountinited, which implicitly fetches the mrootanchor.
- LFS_F_CKDATA - We uh, don't have any data immediately after
lfsr_format. But I guess it doesn't hurt to keep this around for
consistency, it at least implies CKMETA.
Hopefully these flags will be more interesting if/when we start adding
auxiliary trees to the filesystem, otherwise they may be worth reverting
in the future...
Until then, they at least provide some consistency, and I guess a way to
triply check that format was successful.
---
This could probably be better deduplicated, but calling lfsr_fs_gc from
both lfsr_mount and lfsr_format provides a bit better code organization:
code stack
before: 36448 2680
after: 36480 (+0.1%) 2680 (+0.0%)
This is mainly to solve the weird check-hole where passing CKPROGS/
CKREADS as mount flags has no effect on lfsr_format (I mean, it'd be a
bit silly if it did somehow):
LFS_F_RDWR 0 // Format the filesystem as read and write
LFS_F_CKPROGS 0x00000010 // Check progs by reading back progged data
LFS_F_CKREADS 0x00000020 // Check reads via parity bits/checksums
This makes lfsr_format a more cumbersome interface, but I don't know if
this is necessarily a bad thing. There's always risk of data loss when
calling lfsr_format, so maybe it should be a pain to call.
At the very least, format flags may be useful in the future for
enabling/disabling format-time things such as the planned block-map,
parity-tree, etc. Though it's unclear if such significant settings
should be format flags or somehow encoded as fields in our config
struct.
---
The LFS_F_* format flags of course ended up conflicting with our
internal LFS_F_* flags, so I renamed most of the internal flags to match
the closest flag set they participate in:
- LFS_F_TYPE -> LFS_O_TYPE
- LFS_F_UNFLUSH -> LFS_O_UNFLUSH
- LFS_F_UNSYNC -> LFS_O_UNSYNC
- LFS_F_ORPHAN -> LFS_O_ORPHAN
- LFS_F_ZOMBIE -> LFS_O_ZOMBIE
- LFS_F_ORPHANS -> LFS_I_ORPHANS
- LFS_F_UNCOMPACTED -> LFS_I_UNCOMPACTED
- LFS_F_TSTATE -> LFS_T_TSTATE
- LFS_F_BTYPE -> LFS_T_BTYPE
- LFS_F_DIRTY -> LFS_T_DIRTY
- LFS_F_MUTATED -> LFS_T_MUTATED
This may make it a bit less clear which flags are a part of the public
API, vs intended only for internal use, but at the very least our asserts
in format/mount/open/etc should catch most of these mistakes.
---
Code cost ended up being pretty minimal. Actually negative. This is the
second time we're _adding_ a feature that somehow saves code, though the
reality for this one is we're really just pushing constants up into the
user's stack frame. Still, it's a good indication the cost of format
flags is small:
code stack
before: 36452 2680
after: 36448 (-0.0%) 2680 (+0.0%)
This moves all ckread-related logic behind the new opt-in compile-time
LFS_CKREADS flag. So in order to use ckreads you need to 1. define
LFS_CKREADS at compile time, and 2. pass LFS_M_CKREADS during
lfsr_mount.
This was always the plan since, even if ckreads worked perfectly, it
adds a significant amount of baggage (stack mostly) to track the
ck context of all reads.
---
This is the first non-trivial opt-in define in littlefs, so more test
framework features!
test.py and build.py now support the optional ifdef attribute, which
makes it easy to indicate a test suite/case should not be compiled when
a feature is missing.
Also interesting to note is the addition of LFS_IFDEF_CKREADS, which
solves several issues (and general ugliness) related to #ifdefs in
expression. For example:
// does not compile :( (can't embed ifdefs in macros)
LFS_ASSERT(flags == (
LFS_M_CKPROGS
#ifdef LFS_CKREADS
| LFS_M_CKREADS
#endif
))
// does compile :)
LFS_ASSERT(flags == (
LFS_M_CKPROGS
| LFS_IFDEF_CKREADS(LFS_M_CKREADS, 0)));
---
This brings us way back down to our pre-ckread levels of code/stack:
code stack
before-ckreads: 36352 2672
ckreads: 38060 (+4.7%) 3056 (+14.4%)
after-ckreads: 36428 (+0.2%) 2680 (+0.3%)
Unfortunately, we do end up with a bit more code cost than where we
started. Mainly due to code moving around to support the ckread
infrastructure:
code stack
lfsr_bd_readtag: +52 (+23.2%) +8 (+10.0%)
lfsr_rbyd_fetch: +36 (+5.0%) +8 (+6.2%, cold)
lfs_toleb128: -12 (-25.0%) -4 (-20.0%, cold)
total: +76 (+0.2%) +8 (+0.3%)
But oh well. Note that some of these changes are good even without
ckreads, such as only parsing the last ecksum tag.
Added some code, though we don't _really_ care:
code stack
before: 37872 3048
after: 38060 (+0.5%) 3056 (+0.3%)
Also interesting to note the difference in testing time, this highlights
_some_ of the performance cost of ckreads:
with ckreads: 1135.92s
without ckreads: 821.24s
It was a bit tricky to figure out what this should look like.
Traditionally, filesystems tend to fallback to readonly if they detect
unsupported wcompat (ro_compat) flags or similar config mismatch.
We could do something similar in littlefs, but since we default to
asserting on writes to readonly objects for smaller code size, this
would be really weird and hard to use from a users perspective...
Instead, lfsr_mount returns LFS_ERR_NOTSUP on encountering wcompat-
mismatch in RDWR mode, but _not_ RDONLY mode. This allows the common
rdonly-fallback pattern to be implemented on the user's side of things,
similar to the common format-fallback pattern:
int err = lfsr_mount(&lfs, LFS_M_RDWR, &cfg);
if (err && err != LFS_ERR_NOTSUP) {
return err;
}
if (err == LFS_ERR_NOTSUP) {
err = lfsr_mount(&lfs, LFS_M_RDONLY, &cfg);
if (err) {
return err;
}
}
Note that lfsr_mount may still return LFS_ERR_NOTSUP if it encounters
rcompat-flags, even with RDONLY. Detecting this state will likely need
two lfsr_mount calls with the current API, but I don't think that will
be a big deal.
The main benefit of this scheme is that it is quite cheap thanks to
pushing the fallback logic on the user:
code stack
before: 36356 2664
after: 36396 (+0.1%) 2664 (+0.0%)
One missing puzzle piece here is how do you upgrade the filesystem? But I
think the lesson from the on-disk v2.0 -> v2.1 version bump is that this
should really be an explicit function (lfsr_fs_upgrade?). If explicit
and stand-alone, like lfsr_format, we shouldn't need a weird pseudo-
rdonly mode at all.
These simply imply LFS_O_FLUSH/SYNC on all open writable files.
LFS_M_SYNC is equivalent to MS_SYNCHRONOUS in Linux/etc, while
LFS_M_FLUSH is just provided for consistency.
As pure conveniences, these may seem a bit out of scope for littlefs,
except they are _very_ cheap:
code stack
before: 36356 2664
after: 36356 (+0.0%) 2664 (+0.0%)
Ok, they're not _completely_ free! It just turns out they cost 8 bytes,
and a bit of simplification around flag checking in lfsr_mount saved
8 bytes:
code stack
before: 36356 2664
m_flush/sync: 36364 (+0.0%) 2664 (+0.0%)
mount-no-mask: 36356 (+0.0%) 2664 (+0.0%)
These are basically the same as lfsr_fs_ckmeta/ckdata but limited to a
single file. They may be useful when you need to validate a file but
don't want to bother validating the entire filesystem:
// Check a file for metadata errors
int lfsr_file_ckmeta(lfs_t *lfs, lfsr_file_t *file);
// Check a file for metadata + data errors
int lfsr_file_ckdata(lfs_t *lfs, lfsr_file_t *file);
I've also added test_ck to test these and added some more
lfsr_fs_ckmeta/ckdata tests there. These currently just test simple
full-block clobbering, but we should eventually test more interesting
error patterns.
Unfortunately lfsr_file_ckmeta/ckdata can't reuse the internal
lfsr_mtree_traverse in quite the same way lfsr_fs_ckmeta/ckdata can, so
they're actually a bit more expensive. Though keep in mind with
link-time gc you won't pay the cost unless you call these functions:
code stack
before: 36024 2696
after: 36368 (+1.0%) 2664 (-1.2%)
Oh, and the multiple calls to lfsr_btree/bshrub_traverse apparently
uninlined it out of lfsr_mtree_traverse, saving the stack cost in the
stack hot-path... Yay?
These tell littlefs to do the relevant gc work during mount, which may
be more convenient than calling lfsr_mount and then lfsr_fs_gc.
It also implicitly tears down the filesystem on error, which you can
imagine would be quite useful for LFS_M_CKMETA/LFS_M_CKDATA.
Some flags are more useful here than other (is LFS_M_LOOKAHEAD/COMPACT
really useful?), but since we just pass these directly to our traversal
APIs, we might as well support all of them for consistency.
Also note that since these only change mount's behavior, and have no
effect on the rest of the filesystem, these LFS_M_* flags don't have
related LFS_I_* flags and are not returned by lfsr_fs_stat.
---
This added quite a chunk of code, considering that this is entirely for
convenience:
code stack
before: 35932 2680
after: 36280 (+1.0%) 2680 (+0.0%)
But I think this is mostly because our low-level traversal state is
relatively costly to manage. It may be possible to deduplicate this a
bit better...
This has been a long-time coming, mount flags are just too useful for
configuring a filesystem at runtime.
Currently this is limited to LFS_M_RDONLY and LFS_M_CKPROGS, but there
are a few more planned in the future:
LFS_M_RDWR = 0x0000, // Mount the filesystem as read and write
LFS_M_RDONLY = 0x0001, // Mount the filesystem as readonly
LFS_M_STRICT* = 0x0002, // Error if on-disk config does not match
LFS_M_FORCE* = 0x0004, // Ignore compat flags, mount readonly
LFS_M_FORCEWITHRECKLESSABANDON*
= 0x0008, // Ignore compat flags, mount read write
LFS_M_CKPROGS = 0x0010, // Check progs by reading back progged data
LFS_M_CKREADS* = 0x0020, // Check reads via checksums
* Hypothetical
As a convenience, we also return mount flags in the struct lfs_fsinfo's
flags field as their relevant LFS_I_* variants. Though only to match
statvfs, and only because it's cheap, littlefs's API is low-level and we
should expect users to know what flags they passed to lfsr_mount.
As for the new mount flags:
- LFS_M_RDONLY - For consistency with existing APIs, this just asserts
on write operations, which makes it a bit useless... But the info flag
LFS_I_RDONLY may be useful for falling back to a readonly mode if
we encounter on-disk compat issues.
At least if implement the theoretical LFS_UNTRUSTED_USER mode
LFS_M_RDONLY could become a runtime error.
- LFS_M_RDWR - This really just exists to compliment LFS_M_RDONLY and to
match LFS_O_RDONLY/LFS_O_RDWR. It's just an alias for 0, and I don't
think there will ever be a reason to make it non-0 (but I can always
be wrong!).
- LFS_M_CKPROGS - This replaces the check_progs config option and avoids
using a full byte to store a bool.
We should probably also have a compile-time option to compile this out
(LFS_NO_CKPROGS?), but that's a future thing to do.
This ended up adding a surprising bit of code, considering we're just
moving flags around, and noise in lfs_alloc added a bit of stack again:
code stack
before: 35880 2672
after: 35932 (+0.1%) 2680 (+0.3%)
Christopher Haster