At least at a proof-of-concept level, there's still a lot of cleanup
needed.
To make things work, lfs3_alloc_ckpoint now takes an mdir, which
provides the target for gbmap gstate updates.
When the bmap is close to empty (configurable via bmap_scan_thresh), we
opportunistically rebuild it during lfs3_alloc_ckpoints. The nice thing
about lfs3_alloc_ckpoint is we know the state of all in-flight blocks,
so rebuilding the bmap just requires traversing the filesystem + in-RAM
state.
We might still fall back to the lookahead buffer, but in theory a well
tuned bmap_scan_thresh can prevent this from becoming a bottleneck (at
the cost of more frequent bmap rebuilds).
---
This is also probably a good time to resume measuring code/ram costs,
though it's worth repeating the above note about the bmap work still
needing cleanup:
code stack ctx
before: 36840 2368 684
after: 36920 (+0.2%) 2368 (+0.0%) 684 (+0.0%)
Haha, no, the bmap isn't basically free, it's just an opt-in features.
With -DLFS3_YES_BMAP=1:
code stack ctx
no bmap: 36920 2368 684
yes bmap: 38552 (+4.4%) 2472 (+4.4%) 812 (+18.7%)
This is an indulgence to simplify the upcoming auxiliary btree work.
Brings back the previously-reverted per-btree leaf caches, where each
lfs3_btree_t keeps track of two rbyds: The root and the most recently
accessed leaf.
At the surface level, this optimizes repeated access to the same btree
leaf. A common pattern for a number of littlefs's operations that has
proven tricky to manually optimize:
- Btree iteration
- Pokes for our crystalization heuristic
- Checksum collision resolution for dids and (FUTURE) ddkeys
- Related rattrs attached to a single bid
But the real motivation is to drop lfs3_btree_*lookupleaf and simplify
the internal APIs. If repeated lfs3_btree_lookup*s are already
efficient, there's no reason for extra leaf-level APIs, and in theory
any logic that interacts with btrees will be simpler.
---
This comes at a cost (humorously about the same amount as the
tag-returning refactor, if you ignore the extra 28 bytes of ctx).
Unsurprisingly, increasing the size of lfs3_btree_t has the biggest
impact on stack and ctx:
code stack ctx
before: 36084 2336 656
after: 36784 (+1.9%) 2400 (+2.7%) 684 (+4.3%)
Also note from the previous commit messages: Btree leaf caching has
resulted in surprisingly little performance improvement for our current
benchmarks + implementation. It turns out if you're dominated by write
cost, optimizing btree lookups -- which already skip rbyd fetches, has
barely noticeable impact.
---
A note on reverting!
Eventually (after the auxiliary btree work) it will probably make sense
to revert this -- or at least provide a non-leaf-caching build for
code/RAM sensitive users.
I don't think this should be reverted as-is. Instead, I think we should
allow the option to just disable the leaf cache, while keeping the
simpler internal API. This would give us the best of all three worlds:
- A small code/RAM option
- Optimal btree iteration/nearby-lookup performance
- Simpler internal APIs
The only reason this isn't already implemented is because I want to
avoid fragmenting the codebase further while we're still in development
mode.
Note this includes both the lfs3_config -> lfs3_cfg structs as well as
the LFS3_CONFIG -> LFS3_CFG include define:
- LFS3_CONFIG -> LFS3_CFG
- struct lfs3_config -> struct lfs3_cfg
- struct lfs3_file_config -> struct lfs3_file_cfg
- struct lfs3_*bd_config -> struct lfs3_*bd_cfg
- cfg -> cfg
We were already using cfg as the variable name everywhere. The fact that
these names were different was an inconsistency that should be fixed
since we're committing to an API break.
LFS3_CFG is already out-of-date from upstream, and there's plans for a
config rework, but I figured I'd go ahead and change it as well to lower
the chances it gets overlooked.
---
Note this does _not_ affect LFS3_TAG_CONFIG. Having the on-disk vs
driver-level config take slightly different names is not a bad thing.
- test_traversal -> test_trvs
- lfs3_traversal_t -> lfs3_trv_t
- lfs3_btraversal_t -> lfs3_btrv_t
- t -> trv
- bt -> btrv
- lfs3_traversal_* -> lfs3_trv_*
- lfs3_btraversal_* -> lfs3_btrv_*
The traversal type is becoming one of the more fundamental types in
littlefs, and if DIR and REG both get shortened names, it makes sense
for TRV to have one as well.
This also removes the temptation to use t for traversals, which is
probably an even worse name.
---
Note that lfs3_btree_traverse, lfs3_mtree_traverse, etc, remain
unaffected. This may change in the future, but it's interesting to note
that verbs seem to need much less typing than nouns.
Christopher Haster