armink
@@ -0,0 +1,784 @@
|
||||
/**************************************************************************//**
|
||||
* @file core_cm3.c
|
||||
* @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File
|
||||
* @version V1.30
|
||||
* @date 30. October 2009
|
||||
*
|
||||
* @note
|
||||
* Copyright (C) 2009 ARM Limited. All rights reserved.
|
||||
*
|
||||
* @par
|
||||
* ARM Limited (ARM) is supplying this software for use with Cortex-M
|
||||
* processor based microcontrollers. This file can be freely distributed
|
||||
* within development tools that are supporting such ARM based processors.
|
||||
*
|
||||
* @par
|
||||
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
|
||||
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
|
||||
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
|
||||
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
|
||||
*
|
||||
******************************************************************************/
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/* define compiler specific symbols */
|
||||
#if defined ( __CC_ARM )
|
||||
#define __ASM __asm /*!< asm keyword for ARM Compiler */
|
||||
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
#define __ASM __asm /*!< asm keyword for IAR Compiler */
|
||||
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
#define __ASM __asm /*!< asm keyword for GNU Compiler */
|
||||
#define __INLINE inline /*!< inline keyword for GNU Compiler */
|
||||
|
||||
#elif defined ( __TASKING__ )
|
||||
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
|
||||
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
/* ################### Compiler specific Intrinsics ########################### */
|
||||
|
||||
#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
|
||||
/* ARM armcc specific functions */
|
||||
|
||||
/**
|
||||
* @brief Return the Process Stack Pointer
|
||||
*
|
||||
* @return ProcessStackPointer
|
||||
*
|
||||
* Return the actual process stack pointer
|
||||
*/
|
||||
__ASM uint32_t __get_PSP(void)
|
||||
{
|
||||
mrs r0, psp
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Process Stack Pointer
|
||||
*
|
||||
* @param topOfProcStack Process Stack Pointer
|
||||
*
|
||||
* Assign the value ProcessStackPointer to the MSP
|
||||
* (process stack pointer) Cortex processor register
|
||||
*/
|
||||
__ASM void __set_PSP(uint32_t topOfProcStack)
|
||||
{
|
||||
msr psp, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Main Stack Pointer
|
||||
*
|
||||
* @return Main Stack Pointer
|
||||
*
|
||||
* Return the current value of the MSP (main stack pointer)
|
||||
* Cortex processor register
|
||||
*/
|
||||
__ASM uint32_t __get_MSP(void)
|
||||
{
|
||||
mrs r0, msp
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Main Stack Pointer
|
||||
*
|
||||
* @param topOfMainStack Main Stack Pointer
|
||||
*
|
||||
* Assign the value mainStackPointer to the MSP
|
||||
* (main stack pointer) Cortex processor register
|
||||
*/
|
||||
__ASM void __set_MSP(uint32_t mainStackPointer)
|
||||
{
|
||||
msr msp, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reverse byte order in unsigned short value
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse byte order in unsigned short value
|
||||
*/
|
||||
__ASM uint32_t __REV16(uint16_t value)
|
||||
{
|
||||
rev16 r0, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reverse byte order in signed short value with sign extension to integer
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse byte order in signed short value with sign extension to integer
|
||||
*/
|
||||
__ASM int32_t __REVSH(int16_t value)
|
||||
{
|
||||
revsh r0, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
|
||||
#if (__ARMCC_VERSION < 400000)
|
||||
|
||||
/**
|
||||
* @brief Remove the exclusive lock created by ldrex
|
||||
*
|
||||
* Removes the exclusive lock which is created by ldrex.
|
||||
*/
|
||||
__ASM void __CLREX(void)
|
||||
{
|
||||
clrex
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Base Priority value
|
||||
*
|
||||
* @return BasePriority
|
||||
*
|
||||
* Return the content of the base priority register
|
||||
*/
|
||||
__ASM uint32_t __get_BASEPRI(void)
|
||||
{
|
||||
mrs r0, basepri
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Base Priority value
|
||||
*
|
||||
* @param basePri BasePriority
|
||||
*
|
||||
* Set the base priority register
|
||||
*/
|
||||
__ASM void __set_BASEPRI(uint32_t basePri)
|
||||
{
|
||||
msr basepri, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Priority Mask value
|
||||
*
|
||||
* @return PriMask
|
||||
*
|
||||
* Return state of the priority mask bit from the priority mask register
|
||||
*/
|
||||
__ASM uint32_t __get_PRIMASK(void)
|
||||
{
|
||||
mrs r0, primask
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Priority Mask value
|
||||
*
|
||||
* @param priMask PriMask
|
||||
*
|
||||
* Set the priority mask bit in the priority mask register
|
||||
*/
|
||||
__ASM void __set_PRIMASK(uint32_t priMask)
|
||||
{
|
||||
msr primask, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Fault Mask value
|
||||
*
|
||||
* @return FaultMask
|
||||
*
|
||||
* Return the content of the fault mask register
|
||||
*/
|
||||
__ASM uint32_t __get_FAULTMASK(void)
|
||||
{
|
||||
mrs r0, faultmask
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Fault Mask value
|
||||
*
|
||||
* @param faultMask faultMask value
|
||||
*
|
||||
* Set the fault mask register
|
||||
*/
|
||||
__ASM void __set_FAULTMASK(uint32_t faultMask)
|
||||
{
|
||||
msr faultmask, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Control Register value
|
||||
*
|
||||
* @return Control value
|
||||
*
|
||||
* Return the content of the control register
|
||||
*/
|
||||
__ASM uint32_t __get_CONTROL(void)
|
||||
{
|
||||
mrs r0, control
|
||||
bx lr
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Control Register value
|
||||
*
|
||||
* @param control Control value
|
||||
*
|
||||
* Set the control register
|
||||
*/
|
||||
__ASM void __set_CONTROL(uint32_t control)
|
||||
{
|
||||
msr control, r0
|
||||
bx lr
|
||||
}
|
||||
|
||||
#endif /* __ARMCC_VERSION */
|
||||
|
||||
|
||||
|
||||
#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
|
||||
/* IAR iccarm specific functions */
|
||||
#pragma diag_suppress=Pe940
|
||||
|
||||
/**
|
||||
* @brief Return the Process Stack Pointer
|
||||
*
|
||||
* @return ProcessStackPointer
|
||||
*
|
||||
* Return the actual process stack pointer
|
||||
*/
|
||||
uint32_t __get_PSP(void)
|
||||
{
|
||||
__ASM("mrs r0, psp");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Process Stack Pointer
|
||||
*
|
||||
* @param topOfProcStack Process Stack Pointer
|
||||
*
|
||||
* Assign the value ProcessStackPointer to the MSP
|
||||
* (process stack pointer) Cortex processor register
|
||||
*/
|
||||
void __set_PSP(uint32_t topOfProcStack)
|
||||
{
|
||||
__ASM("msr psp, r0");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Main Stack Pointer
|
||||
*
|
||||
* @return Main Stack Pointer
|
||||
*
|
||||
* Return the current value of the MSP (main stack pointer)
|
||||
* Cortex processor register
|
||||
*/
|
||||
uint32_t __get_MSP(void)
|
||||
{
|
||||
__ASM("mrs r0, msp");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Main Stack Pointer
|
||||
*
|
||||
* @param topOfMainStack Main Stack Pointer
|
||||
*
|
||||
* Assign the value mainStackPointer to the MSP
|
||||
* (main stack pointer) Cortex processor register
|
||||
*/
|
||||
void __set_MSP(uint32_t topOfMainStack)
|
||||
{
|
||||
__ASM("msr msp, r0");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reverse byte order in unsigned short value
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse byte order in unsigned short value
|
||||
*/
|
||||
uint32_t __REV16(uint16_t value)
|
||||
{
|
||||
__ASM("rev16 r0, r0");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reverse bit order of value
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse bit order of value
|
||||
*/
|
||||
uint32_t __RBIT(uint32_t value)
|
||||
{
|
||||
__ASM("rbit r0, r0");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief LDR Exclusive (8 bit)
|
||||
*
|
||||
* @param *addr address pointer
|
||||
* @return value of (*address)
|
||||
*
|
||||
* Exclusive LDR command for 8 bit values)
|
||||
*/
|
||||
uint8_t __LDREXB(uint8_t *addr)
|
||||
{
|
||||
__ASM("ldrexb r0, [r0]");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief LDR Exclusive (16 bit)
|
||||
*
|
||||
* @param *addr address pointer
|
||||
* @return value of (*address)
|
||||
*
|
||||
* Exclusive LDR command for 16 bit values
|
||||
*/
|
||||
uint16_t __LDREXH(uint16_t *addr)
|
||||
{
|
||||
__ASM("ldrexh r0, [r0]");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief LDR Exclusive (32 bit)
|
||||
*
|
||||
* @param *addr address pointer
|
||||
* @return value of (*address)
|
||||
*
|
||||
* Exclusive LDR command for 32 bit values
|
||||
*/
|
||||
uint32_t __LDREXW(uint32_t *addr)
|
||||
{
|
||||
__ASM("ldrex r0, [r0]");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief STR Exclusive (8 bit)
|
||||
*
|
||||
* @param value value to store
|
||||
* @param *addr address pointer
|
||||
* @return successful / failed
|
||||
*
|
||||
* Exclusive STR command for 8 bit values
|
||||
*/
|
||||
uint32_t __STREXB(uint8_t value, uint8_t *addr)
|
||||
{
|
||||
__ASM("strexb r0, r0, [r1]");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief STR Exclusive (16 bit)
|
||||
*
|
||||
* @param value value to store
|
||||
* @param *addr address pointer
|
||||
* @return successful / failed
|
||||
*
|
||||
* Exclusive STR command for 16 bit values
|
||||
*/
|
||||
uint32_t __STREXH(uint16_t value, uint16_t *addr)
|
||||
{
|
||||
__ASM("strexh r0, r0, [r1]");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief STR Exclusive (32 bit)
|
||||
*
|
||||
* @param value value to store
|
||||
* @param *addr address pointer
|
||||
* @return successful / failed
|
||||
*
|
||||
* Exclusive STR command for 32 bit values
|
||||
*/
|
||||
uint32_t __STREXW(uint32_t value, uint32_t *addr)
|
||||
{
|
||||
__ASM("strex r0, r0, [r1]");
|
||||
__ASM("bx lr");
|
||||
}
|
||||
|
||||
#pragma diag_default=Pe940
|
||||
|
||||
|
||||
#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
|
||||
/* GNU gcc specific functions */
|
||||
|
||||
/**
|
||||
* @brief Return the Process Stack Pointer
|
||||
*
|
||||
* @return ProcessStackPointer
|
||||
*
|
||||
* Return the actual process stack pointer
|
||||
*/
|
||||
uint32_t __get_PSP(void) __attribute__( ( naked ) );
|
||||
uint32_t __get_PSP(void)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("MRS %0, psp\n\t"
|
||||
"MOV r0, %0 \n\t"
|
||||
"BX lr \n\t" : "=r" (result) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Process Stack Pointer
|
||||
*
|
||||
* @param topOfProcStack Process Stack Pointer
|
||||
*
|
||||
* Assign the value ProcessStackPointer to the MSP
|
||||
* (process stack pointer) Cortex processor register
|
||||
*/
|
||||
void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
|
||||
void __set_PSP(uint32_t topOfProcStack)
|
||||
{
|
||||
__ASM volatile ("MSR psp, %0\n\t"
|
||||
"BX lr \n\t" : : "r" (topOfProcStack) );
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Main Stack Pointer
|
||||
*
|
||||
* @return Main Stack Pointer
|
||||
*
|
||||
* Return the current value of the MSP (main stack pointer)
|
||||
* Cortex processor register
|
||||
*/
|
||||
uint32_t __get_MSP(void) __attribute__( ( naked ) );
|
||||
uint32_t __get_MSP(void)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("MRS %0, msp\n\t"
|
||||
"MOV r0, %0 \n\t"
|
||||
"BX lr \n\t" : "=r" (result) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Main Stack Pointer
|
||||
*
|
||||
* @param topOfMainStack Main Stack Pointer
|
||||
*
|
||||
* Assign the value mainStackPointer to the MSP
|
||||
* (main stack pointer) Cortex processor register
|
||||
*/
|
||||
void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
|
||||
void __set_MSP(uint32_t topOfMainStack)
|
||||
{
|
||||
__ASM volatile ("MSR msp, %0\n\t"
|
||||
"BX lr \n\t" : : "r" (topOfMainStack) );
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Base Priority value
|
||||
*
|
||||
* @return BasePriority
|
||||
*
|
||||
* Return the content of the base priority register
|
||||
*/
|
||||
uint32_t __get_BASEPRI(void)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Base Priority value
|
||||
*
|
||||
* @param basePri BasePriority
|
||||
*
|
||||
* Set the base priority register
|
||||
*/
|
||||
void __set_BASEPRI(uint32_t value)
|
||||
{
|
||||
__ASM volatile ("MSR basepri, %0" : : "r" (value) );
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Priority Mask value
|
||||
*
|
||||
* @return PriMask
|
||||
*
|
||||
* Return state of the priority mask bit from the priority mask register
|
||||
*/
|
||||
uint32_t __get_PRIMASK(void)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("MRS %0, primask" : "=r" (result) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Priority Mask value
|
||||
*
|
||||
* @param priMask PriMask
|
||||
*
|
||||
* Set the priority mask bit in the priority mask register
|
||||
*/
|
||||
void __set_PRIMASK(uint32_t priMask)
|
||||
{
|
||||
__ASM volatile ("MSR primask, %0" : : "r" (priMask) );
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Fault Mask value
|
||||
*
|
||||
* @return FaultMask
|
||||
*
|
||||
* Return the content of the fault mask register
|
||||
*/
|
||||
uint32_t __get_FAULTMASK(void)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("MRS %0, faultmask" : "=r" (result) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Fault Mask value
|
||||
*
|
||||
* @param faultMask faultMask value
|
||||
*
|
||||
* Set the fault mask register
|
||||
*/
|
||||
void __set_FAULTMASK(uint32_t faultMask)
|
||||
{
|
||||
__ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the Control Register value
|
||||
*
|
||||
* @return Control value
|
||||
*
|
||||
* Return the content of the control register
|
||||
*/
|
||||
uint32_t __get_CONTROL(void)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("MRS %0, control" : "=r" (result) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the Control Register value
|
||||
*
|
||||
* @param control Control value
|
||||
*
|
||||
* Set the control register
|
||||
*/
|
||||
void __set_CONTROL(uint32_t control)
|
||||
{
|
||||
__ASM volatile ("MSR control, %0" : : "r" (control) );
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Reverse byte order in integer value
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse byte order in integer value
|
||||
*/
|
||||
uint32_t __REV(uint32_t value)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reverse byte order in unsigned short value
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse byte order in unsigned short value
|
||||
*/
|
||||
uint32_t __REV16(uint16_t value)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reverse byte order in signed short value with sign extension to integer
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse byte order in signed short value with sign extension to integer
|
||||
*/
|
||||
int32_t __REVSH(int16_t value)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reverse bit order of value
|
||||
*
|
||||
* @param value value to reverse
|
||||
* @return reversed value
|
||||
*
|
||||
* Reverse bit order of value
|
||||
*/
|
||||
uint32_t __RBIT(uint32_t value)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief LDR Exclusive (8 bit)
|
||||
*
|
||||
* @param *addr address pointer
|
||||
* @return value of (*address)
|
||||
*
|
||||
* Exclusive LDR command for 8 bit value
|
||||
*/
|
||||
uint8_t __LDREXB(uint8_t *addr)
|
||||
{
|
||||
uint8_t result=0;
|
||||
|
||||
__ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief LDR Exclusive (16 bit)
|
||||
*
|
||||
* @param *addr address pointer
|
||||
* @return value of (*address)
|
||||
*
|
||||
* Exclusive LDR command for 16 bit values
|
||||
*/
|
||||
uint16_t __LDREXH(uint16_t *addr)
|
||||
{
|
||||
uint16_t result=0;
|
||||
|
||||
__ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief LDR Exclusive (32 bit)
|
||||
*
|
||||
* @param *addr address pointer
|
||||
* @return value of (*address)
|
||||
*
|
||||
* Exclusive LDR command for 32 bit values
|
||||
*/
|
||||
uint32_t __LDREXW(uint32_t *addr)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief STR Exclusive (8 bit)
|
||||
*
|
||||
* @param value value to store
|
||||
* @param *addr address pointer
|
||||
* @return successful / failed
|
||||
*
|
||||
* Exclusive STR command for 8 bit values
|
||||
*/
|
||||
uint32_t __STREXB(uint8_t value, uint8_t *addr)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief STR Exclusive (16 bit)
|
||||
*
|
||||
* @param value value to store
|
||||
* @param *addr address pointer
|
||||
* @return successful / failed
|
||||
*
|
||||
* Exclusive STR command for 16 bit values
|
||||
*/
|
||||
uint32_t __STREXH(uint16_t value, uint16_t *addr)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief STR Exclusive (32 bit)
|
||||
*
|
||||
* @param value value to store
|
||||
* @param *addr address pointer
|
||||
* @return successful / failed
|
||||
*
|
||||
* Exclusive STR command for 32 bit values
|
||||
*/
|
||||
uint32_t __STREXW(uint32_t value, uint32_t *addr)
|
||||
{
|
||||
uint32_t result=0;
|
||||
|
||||
__ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
|
||||
return(result);
|
||||
}
|
||||
|
||||
|
||||
#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
|
||||
/* TASKING carm specific functions */
|
||||
|
||||
/*
|
||||
* The CMSIS functions have been implemented as intrinsics in the compiler.
|
||||
* Please use "carm -?i" to get an up to date list of all instrinsics,
|
||||
* Including the CMSIS ones.
|
||||
*/
|
||||
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
+266
@@ -0,0 +1,266 @@
|
||||
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
|
||||
<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head>
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
|
||||
<link rel="File-List" href="Library_files/filelist.xml">
|
||||
<link rel="Edit-Time-Data" href="Library_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><title>Release Notes for STM32F10x CMSIS</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>STMicroelectronics</o:LastAuthor> <o:Revision>37</o:Revision> <o:TotalTime>136</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-03-01T17:56:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>522</o:Words> <o:Characters>2977</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>24</o:Lines> <o:Paragraphs>6</o:Paragraphs> <o:CharactersWithSpaces>3493</o:CharactersWithSpaces> <o:Version>11.6568</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]-->
|
||||
|
||||
|
||||
|
||||
<style>
|
||||
<!--
|
||||
/* Style Definitions */
|
||||
p.MsoNormal, li.MsoNormal, div.MsoNormal
|
||||
{mso-style-parent:"";
|
||||
margin:0in;
|
||||
margin-bottom:.0001pt;
|
||||
mso-pagination:widow-orphan;
|
||||
font-size:12.0pt;
|
||||
font-family:"Times New Roman";
|
||||
mso-fareast-font-family:"Times New Roman";}
|
||||
h2
|
||||
{mso-style-next:Normal;
|
||||
margin-top:12.0pt;
|
||||
margin-right:0in;
|
||||
margin-bottom:3.0pt;
|
||||
margin-left:0in;
|
||||
mso-pagination:widow-orphan;
|
||||
page-break-after:avoid;
|
||||
mso-outline-level:2;
|
||||
font-size:14.0pt;
|
||||
font-family:Arial;
|
||||
font-weight:bold;
|
||||
font-style:italic;}
|
||||
a:link, span.MsoHyperlink
|
||||
{color:blue;
|
||||
text-decoration:underline;
|
||||
text-underline:single;}
|
||||
a:visited, span.MsoHyperlinkFollowed
|
||||
{color:blue;
|
||||
text-decoration:underline;
|
||||
text-underline:single;}
|
||||
p
|
||||
{mso-margin-top-alt:auto;
|
||||
margin-right:0in;
|
||||
mso-margin-bottom-alt:auto;
|
||||
margin-left:0in;
|
||||
mso-pagination:widow-orphan;
|
||||
font-size:12.0pt;
|
||||
font-family:"Times New Roman";
|
||||
mso-fareast-font-family:"Times New Roman";}
|
||||
@page Section1
|
||||
{size:8.5in 11.0in;
|
||||
margin:1.0in 1.25in 1.0in 1.25in;
|
||||
mso-header-margin:.5in;
|
||||
mso-footer-margin:.5in;
|
||||
mso-paper-source:0;}
|
||||
div.Section1
|
||||
{page:Section1;}
|
||||
-->
|
||||
</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="5122"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--></head><body lang="EN-US" link="blue" vlink="blue">
|
||||
<div class="Section1">
|
||||
<p class="MsoNormal"><span style="font-family: Arial;"><o:p><br>
|
||||
</o:p></span></p>
|
||||
<div align="center">
|
||||
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
|
||||
<tbody>
|
||||
<tr style="">
|
||||
<td style="padding: 0cm;" valign="top">
|
||||
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
|
||||
<tbody>
|
||||
<tr>
|
||||
<td style="vertical-align: top;"><span style="font-size: 8pt; font-family: Arial; color: blue;"><a href="../../../../../Release_Notes.html">Back to Release page</a></span></td>
|
||||
</tr>
|
||||
<tr style="">
|
||||
<td style="padding: 1.5pt;">
|
||||
<h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">Release
|
||||
Notes for STM32F10x CMSIS</span><span style="font-size: 20pt; font-family: Verdana;"><o:p></o:p></span></h1>
|
||||
<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;">Copyright 2010 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p>
|
||||
<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;"><img alt="" id="_x0000_i1025" src="../../../../../_htmresc/logo.bmp" style="border: 0px solid ; width: 86px; height: 65px;"></span><span style="font-size: 10pt;"><o:p></o:p></span></p>
|
||||
</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
<p class="MsoNormal"><span style="font-family: Arial; display: none;"><o:p> </o:p></span></p>
|
||||
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900">
|
||||
<tbody>
|
||||
<tr>
|
||||
<td style="padding: 0cm;" valign="top">
|
||||
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial;"><span style="font-size: 12pt; color: white;">Contents<o:p></o:p></span></h2>
|
||||
<ol style="margin-top: 0cm;" start="1" type="1">
|
||||
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#History">STM32F10x CMSIS
|
||||
update History</a><o:p></o:p></span></li>
|
||||
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#License">License</a><o:p></o:p></span></li>
|
||||
</ol>
|
||||
<span style="font-family: "Times New Roman";"></span>
|
||||
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">STM32F10x CMSIS
|
||||
update History</span></h2>
|
||||
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.4.0
|
||||
- 10/15/2010</span></h3>
|
||||
|
||||
<ol>
|
||||
<li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li>
|
||||
</ol>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
|
||||
for <b>STM32F10x High-density Value line devices</b>.</span></li>
|
||||
</ul>
|
||||
<ol start="2">
|
||||
<li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li>
|
||||
</ol>
|
||||
|
||||
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
|
||||
</li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support High-density Value line devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_HD_VL</span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, FSMC bits definition updated</span></li>
|
||||
</ul>
|
||||
<li class="MsoNormal" style="">
|
||||
|
||||
<span style="font-size: 10pt; font-family: "Verdana","sans-serif";">All
|
||||
STM32 devices definitions are commented by default. User has to select the
|
||||
appropriate device before starting else an error will be signaled on compile
|
||||
time.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: "Verdana","sans-serif";">Add new IRQs definitons inside the IRQn_Type enumeration for STM23 High-density Value line devices.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: "Verdana","sans-serif";">"<span style="font-weight: bold;">bool</span>" type removed.</span><br>
|
||||
<span style="font-size: 10pt; font-family: "Verdana","sans-serif";"></span></li>
|
||||
</ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"></span></li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">"system_stm32f10x.c" </span><span style="font-weight: bold;"></span>moved to to "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Template</span>" directory. This file is also moved to each example directory under "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Examples</span>".</span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support High-density Value line devices.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add "<span style="font-style: italic;">VECT_TAB_SRAM</span>" inside "</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">system_stm32f10x.c</span></span><span style="font-size: 10pt; font-family: Verdana;">"
|
||||
to select if the user want to place the Vector Table in internal SRAM.
|
||||
An additional define is also to specify the Vector Table offset "<span style="font-style: italic;">VECT_TAB_OFFSET</span>".<br>
|
||||
</span></li>
|
||||
|
||||
</ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span></span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add three
|
||||
startup files for STM32 High-density Value line devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_hd_vl.s</span></span></li></ul>
|
||||
</ul>
|
||||
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.3.0
|
||||
- 04/16/2010</span></h3>
|
||||
|
||||
<ol><li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li></ol>
|
||||
<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
|
||||
for <b>STM32F10x XL-density devices</b>.</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain<br></span></li></ul><ol start="2"><li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li></ol>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
|
||||
</li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support XL-density devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_XL</span></span></li></ul><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IRQs for </span><span style="font-size: 10pt; font-family: Verdana;">TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update FLASH_TypeDef structure</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IP instances TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, DBGMCU bits definition updated</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices (remove comma "," at the end of enum list)<br></span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support XL-density devices</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit()</span> function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions. </span><span style="font-size: 10pt; font-family: Verdana;"><br>
|
||||
</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span><span style="font-weight: bold; font-style: italic;"></span><span style="font-style: italic;"><span style="font-weight: bold;"></span></span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">add three
|
||||
startup files for STM32 XL-density devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xl.s</span></span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold;">startup_stm32f10x_md_vl.s</span> for RIDE7: add USART3 IRQ Handler (was missing in previous version)</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain</span></li></ul></ul><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;"></span></span>
|
||||
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.2.0
|
||||
- 03/01/2010</span></h3>
|
||||
<ol style="margin-top: 0in;" start="1" type="1">
|
||||
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i><i><span style="font-size: 10pt;"><o:p></o:p></span></i></li>
|
||||
</ol>
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS files updated to <span style="font-weight: bold;">CMSIS V1.30</span> release</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Directory structure updated to be aligned with CMSIS V1.30<br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
|
||||
for <b>STM32 Low-density Value line (STM32F100x4/6) and
|
||||
Medium-density Value line (STM32F100x8/B) devices</b>. </span><span style="font-size: 10pt;"><o:p></o:p></span></li>
|
||||
|
||||
</ul>
|
||||
<ol style="margin-top: 0in;" start="2" type="1">
|
||||
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">CMSIS Core Peripheral Access Layer</span></i></b></li></ol>
|
||||
<ul>
|
||||
<li><b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i></b><span style="font-size: 10pt; font-family: Verdana;"> Refer to <a href="../../../CMSIS_changes.htm" target="_blank">CMSIS changes</a></span></li>
|
||||
</ul>
|
||||
<ol style="margin-top: 0in; list-style-type: decimal;" start="3">
|
||||
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b><b><i><span style="font-size: 10pt;"><o:p></o:p></span></i></b></li>
|
||||
|
||||
</ol>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
|
||||
</li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update
|
||||
the stm32f10x.h file to support new Value line devices features: CEC
|
||||
peripheral, new General purpose timers TIM15, TIM16 and TIM17.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Peripherals Bits definitions updated to be in line with Value line devices available features.<br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">HSE_Value,
|
||||
HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE,
|
||||
HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy
|
||||
purposes.<br>
|
||||
</span></li>
|
||||
</ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"></span></li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemFrequency variable name changed to SystemCoreClock</span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Default
|
||||
</span></span><span style="font-size: 10pt; font-family: Verdana;">SystemCoreClock</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"> is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.</span></span><span style="font-size: 10pt;"><o:p></o:p></span><span style="font-size: 10pt; font-family: Verdana;"> <br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.<br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Additional function <span style="font-weight: bold; font-style: italic;">void SystemCoreClockUpdate (void)</span> is provided.<br>
|
||||
</span></li>
|
||||
</ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Startup files:</span> <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new
|
||||
startup files for STM32 Low-density Value line devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_ld_vl.s</span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new startup
|
||||
files for STM32 Medium-density Value line devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_md_vl.s</span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main.<br>
|
||||
To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file <br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.<br>
|
||||
</span></li>
|
||||
</ul>
|
||||
|
||||
</ul>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
</ul>
|
||||
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2>
|
||||
<p class="MsoNormal" style="margin: 4.5pt 0cm;"><span style="font-size: 10pt; font-family: Verdana; color: black;">The
|
||||
enclosed firmware and all the related documentation are not covered by
|
||||
a License Agreement, if you need such License you can contact your
|
||||
local STMicroelectronics office.<u1:p></u1:p><o:p></o:p></span></p>
|
||||
<p class="MsoNormal"><b style=""><span style="font-size: 10pt; font-family: Verdana; color: black;">THE
|
||||
PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO
|
||||
SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR
|
||||
ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY
|
||||
CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY
|
||||
CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH
|
||||
THEIR PRODUCTS. <o:p></o:p></span></b></p>
|
||||
<p class="MsoNormal"><span style="color: black;"><o:p> </o:p></span></p>
|
||||
<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;">
|
||||
<hr align="center" size="2" width="100%"></span></div>
|
||||
<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt; text-align: center;" align="center"><span style="font-size: 10pt; font-family: Verdana; color: black;">For
|
||||
complete documentation on </span><span style="font-size: 10pt; font-family: Verdana;">STM32(<span style="color: black;">CORTEX M3) 32-Bit Microcontrollers
|
||||
visit </span><u><span style="color: blue;"><a href="http://www.st.com/stm32" target="_blank">www.st.com/STM32</a></span></u></span><span style="color: black;"><o:p></o:p></span></p>
|
||||
</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p>
|
||||
</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
</div>
|
||||
<p class="MsoNormal"><o:p> </o:p></p>
|
||||
</div>
|
||||
</body></html>
|
||||
+284
@@ -0,0 +1,284 @@
|
||||
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
|
||||
<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head>
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
|
||||
<link rel="File-List" href="Library_files/filelist.xml">
|
||||
<link rel="Edit-Time-Data" href="Library_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><title>Release Notes for STM32F10x CMSIS</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>STMicroelectronics</o:LastAuthor> <o:Revision>37</o:Revision> <o:TotalTime>136</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-03-01T17:56:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>522</o:Words> <o:Characters>2977</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>24</o:Lines> <o:Paragraphs>6</o:Paragraphs> <o:CharactersWithSpaces>3493</o:CharactersWithSpaces> <o:Version>11.6568</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]-->
|
||||
|
||||
|
||||
|
||||
<style>
|
||||
<!--
|
||||
/* Style Definitions */
|
||||
p.MsoNormal, li.MsoNormal, div.MsoNormal
|
||||
{mso-style-parent:"";
|
||||
margin:0in;
|
||||
margin-bottom:.0001pt;
|
||||
mso-pagination:widow-orphan;
|
||||
font-size:12.0pt;
|
||||
font-family:"Times New Roman";
|
||||
mso-fareast-font-family:"Times New Roman";}
|
||||
h2
|
||||
{mso-style-next:Normal;
|
||||
margin-top:12.0pt;
|
||||
margin-right:0in;
|
||||
margin-bottom:3.0pt;
|
||||
margin-left:0in;
|
||||
mso-pagination:widow-orphan;
|
||||
page-break-after:avoid;
|
||||
mso-outline-level:2;
|
||||
font-size:14.0pt;
|
||||
font-family:Arial;
|
||||
font-weight:bold;
|
||||
font-style:italic;}
|
||||
a:link, span.MsoHyperlink
|
||||
{color:blue;
|
||||
text-decoration:underline;
|
||||
text-underline:single;}
|
||||
a:visited, span.MsoHyperlinkFollowed
|
||||
{color:blue;
|
||||
text-decoration:underline;
|
||||
text-underline:single;}
|
||||
p
|
||||
{mso-margin-top-alt:auto;
|
||||
margin-right:0in;
|
||||
mso-margin-bottom-alt:auto;
|
||||
margin-left:0in;
|
||||
mso-pagination:widow-orphan;
|
||||
font-size:12.0pt;
|
||||
font-family:"Times New Roman";
|
||||
mso-fareast-font-family:"Times New Roman";}
|
||||
@page Section1
|
||||
{size:8.5in 11.0in;
|
||||
margin:1.0in 1.25in 1.0in 1.25in;
|
||||
mso-header-margin:.5in;
|
||||
mso-footer-margin:.5in;
|
||||
mso-paper-source:0;}
|
||||
div.Section1
|
||||
{page:Section1;}
|
||||
-->
|
||||
</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="5122"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--></head>
|
||||
<body lang="EN-US" link="blue" vlink="blue">
|
||||
<div class="Section1">
|
||||
<p class="MsoNormal"><span style="font-family: Arial;"><o:p><br>
|
||||
</o:p></span></p>
|
||||
<div align="center">
|
||||
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
|
||||
<tbody>
|
||||
<tr style="">
|
||||
<td style="padding: 0cm;" valign="top">
|
||||
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
|
||||
<tbody>
|
||||
<tr>
|
||||
<td style="vertical-align: top;"><span style="font-size: 8pt; font-family: Arial; color: blue;"><a href="../../../../../../Release_Notes.html">Back to Release page</a></span></td>
|
||||
</tr>
|
||||
<tr style="">
|
||||
<td style="padding: 1.5pt;">
|
||||
<h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">Release
|
||||
Notes for STM32F10x CMSIS</span><span style="font-size: 20pt; font-family: Verdana;"><o:p></o:p></span></h1>
|
||||
<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;">Copyright 2011 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p>
|
||||
<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;"><img alt="" id="_x0000_i1025" src="../../../../../../_htmresc/logo.bmp" style="border: 0px solid ; width: 86px; height: 65px;"></span><span style="font-size: 10pt;"><o:p></o:p></span></p>
|
||||
</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
<p class="MsoNormal"><span style="font-family: Arial; display: none;"><o:p> </o:p></span></p>
|
||||
<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900">
|
||||
<tbody>
|
||||
<tr>
|
||||
<td style="padding: 0cm;" valign="top">
|
||||
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><span style="font-size: 12pt; color: white;">Contents<o:p></o:p></span></h2>
|
||||
<ol style="margin-top: 0cm;" start="1" type="1">
|
||||
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#History">STM32F10x CMSIS
|
||||
update History</a><o:p></o:p></span></li>
|
||||
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#License">License</a><o:p></o:p></span></li>
|
||||
</ol>
|
||||
<span style="font-family: "Times New Roman";"></span>
|
||||
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">STM32F10x CMSIS
|
||||
update History</span></h2><br>
|
||||
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V3.5.0 / 11-March-2011<o:p></o:p></span></h3>
|
||||
<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
|
||||
Changes<o:p></o:p></span></u></b></p>
|
||||
|
||||
<ul style="margin-top: 0cm;" type="square">
|
||||
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">stm32f10x.h
|
||||
</span>and <span style="font-style: italic;">startup_stm32f10x_hd_vl.s</span> files: remove the FSMC interrupt
|
||||
definition for STM32F10x High-density Value line devices.<br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">system_stm32f10x.c</span> file provided within the CMSIS folder. <br>
|
||||
</span></li>
|
||||
|
||||
</ul>
|
||||
|
||||
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.4.0
|
||||
- 10/15/2010</span></h3>
|
||||
|
||||
<ol>
|
||||
<li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li>
|
||||
</ol>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
|
||||
for <b>STM32F10x High-density Value line devices</b>.</span></li>
|
||||
</ul>
|
||||
<ol start="2">
|
||||
<li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li>
|
||||
</ol>
|
||||
|
||||
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
|
||||
</li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support High-density Value line devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_HD_VL</span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, FSMC bits definition updated</span></li>
|
||||
</ul>
|
||||
<li class="MsoNormal" style="">
|
||||
|
||||
<span style="font-size: 10pt; font-family: "Verdana","sans-serif";">All
|
||||
STM32 devices definitions are commented by default. User has to select the
|
||||
appropriate device before starting else an error will be signaled on compile
|
||||
time.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: "Verdana","sans-serif";">Add new IRQs definitons inside the IRQn_Type enumeration for STM23 High-density Value line devices.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: "Verdana","sans-serif";">"<span style="font-weight: bold;">bool</span>" type removed.</span><br>
|
||||
<span style="font-size: 10pt; font-family: "Verdana","sans-serif";"></span></li>
|
||||
</ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"></span></li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">"system_stm32f10x.c" </span><span style="font-weight: bold;"></span>moved to to "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Template</span>" directory. This file is also moved to each example directory under "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Examples</span>".</span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support High-density Value line devices.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add "<span style="font-style: italic;">VECT_TAB_SRAM</span>" inside "</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">system_stm32f10x.c</span></span><span style="font-size: 10pt; font-family: Verdana;">"
|
||||
to select if the user want to place the Vector Table in internal SRAM.
|
||||
An additional define is also to specify the Vector Table offset "<span style="font-style: italic;">VECT_TAB_OFFSET</span>".<br>
|
||||
</span></li>
|
||||
|
||||
</ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span></span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add three
|
||||
startup files for STM32 High-density Value line devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_hd_vl.s</span></span></li></ul>
|
||||
</ul>
|
||||
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.3.0
|
||||
- 04/16/2010</span></h3>
|
||||
|
||||
<ol><li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li></ol>
|
||||
<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
|
||||
for <b>STM32F10x XL-density devices</b>.</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain<br></span></li></ul><ol start="2"><li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li></ol>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
|
||||
</li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support XL-density devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_XL</span></span></li></ul><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IRQs for </span><span style="font-size: 10pt; font-family: Verdana;">TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update FLASH_TypeDef structure</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IP instances TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, DBGMCU bits definition updated</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices (remove comma "," at the end of enum list)<br></span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support XL-density devices</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit()</span> function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions. </span><span style="font-size: 10pt; font-family: Verdana;"><br>
|
||||
</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span><span style="font-weight: bold; font-style: italic;"></span><span style="font-style: italic;"><span style="font-weight: bold;"></span></span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">add three
|
||||
startup files for STM32 XL-density devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xl.s</span></span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold;">startup_stm32f10x_md_vl.s</span> for RIDE7: add USART3 IRQ Handler (was missing in previous version)</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain</span></li></ul></ul><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;"></span></span>
|
||||
<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.2.0
|
||||
- 03/01/2010</span></h3>
|
||||
<ol style="margin-top: 0in;" start="1" type="1">
|
||||
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i><i><span style="font-size: 10pt;"><o:p></o:p></span></i></li>
|
||||
</ol>
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS files updated to <span style="font-weight: bold;">CMSIS V1.30</span> release</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Directory structure updated to be aligned with CMSIS V1.30<br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
|
||||
for <b>STM32 Low-density Value line (STM32F100x4/6) and
|
||||
Medium-density Value line (STM32F100x8/B) devices</b>. </span><span style="font-size: 10pt;"><o:p></o:p></span></li>
|
||||
|
||||
</ul>
|
||||
<ol style="margin-top: 0in;" start="2" type="1">
|
||||
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">CMSIS Core Peripheral Access Layer</span></i></b></li></ol>
|
||||
<ul>
|
||||
<li><b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i></b><span style="font-size: 10pt; font-family: Verdana;"> Refer to <a href="../../../CMSIS_changes.htm" target="_blank">CMSIS changes</a></span></li>
|
||||
</ul>
|
||||
<ol style="margin-top: 0in; list-style-type: decimal;" start="3">
|
||||
<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b><b><i><span style="font-size: 10pt;"><o:p></o:p></span></i></b></li>
|
||||
|
||||
</ol>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
|
||||
</li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update
|
||||
the stm32f10x.h file to support new Value line devices features: CEC
|
||||
peripheral, new General purpose timers TIM15, TIM16 and TIM17.</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Peripherals Bits definitions updated to be in line with Value line devices available features.<br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">HSE_Value,
|
||||
HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE,
|
||||
HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy
|
||||
purposes.<br>
|
||||
</span></li>
|
||||
</ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"></span></li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemFrequency variable name changed to SystemCoreClock</span><br>
|
||||
<span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Default
|
||||
</span></span><span style="font-size: 10pt; font-family: Verdana;">SystemCoreClock</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"> is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.</span></span><span style="font-size: 10pt;"><o:p></o:p></span><span style="font-size: 10pt; font-family: Verdana;"> <br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.<br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Additional function <span style="font-weight: bold; font-style: italic;">void SystemCoreClockUpdate (void)</span> is provided.<br>
|
||||
</span></li>
|
||||
</ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Startup files:</span> <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li>
|
||||
<ul>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new
|
||||
startup files for STM32 Low-density Value line devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_ld_vl.s</span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new startup
|
||||
files for STM32 Medium-density Value line devices:
|
||||
<span style="font-weight: bold; font-style: italic;">startup_stm32f10x_md_vl.s</span></span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main.<br>
|
||||
To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file <br>
|
||||
</span></li>
|
||||
<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.<br>
|
||||
</span></li>
|
||||
</ul>
|
||||
|
||||
</ul>
|
||||
|
||||
<ul style="margin-top: 0in;" type="disc">
|
||||
</ul>
|
||||
<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2>
|
||||
<p class="MsoNormal" style="margin: 4.5pt 0cm;"><span style="font-size: 10pt; font-family: Verdana; color: black;">The
|
||||
enclosed firmware and all the related documentation are not covered by
|
||||
a License Agreement, if you need such License you can contact your
|
||||
local STMicroelectronics office.<u1:p></u1:p><o:p></o:p></span></p>
|
||||
<p class="MsoNormal"><b style=""><span style="font-size: 10pt; font-family: Verdana; color: black;">THE
|
||||
PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO
|
||||
SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR
|
||||
ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY
|
||||
CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY
|
||||
CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH
|
||||
THEIR PRODUCTS. <o:p></o:p></span></b></p>
|
||||
<p class="MsoNormal"><span style="color: black;"><o:p> </o:p></span></p>
|
||||
<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;">
|
||||
<hr align="center" size="2" width="100%"></span></div>
|
||||
<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt; text-align: center;" align="center"><span style="font-size: 10pt; font-family: Verdana; color: black;">For
|
||||
complete documentation on </span><span style="font-size: 10pt; font-family: Verdana;">STM32(<span style="color: black;">CORTEX M3) 32-Bit Microcontrollers
|
||||
visit </span><u><span style="color: blue;"><a href="http://www.st.com/stm32" target="_blank">www.st.com/STM32</a></span></u></span><span style="color: black;"><o:p></o:p></span></p>
|
||||
</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p>
|
||||
</td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
</div>
|
||||
<p class="MsoNormal"><o:p> </o:p></p>
|
||||
</div>
|
||||
</body></html>
|
||||
+368
@@ -0,0 +1,368 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_cl.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C1 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT ETH_IRQHandler [WEAK]
|
||||
EXPORT ETH_WKUP_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
ETH_IRQHandler
|
||||
ETH_WKUP_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+358
@@ -0,0 +1,358 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_hd.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x High Density Devices vector table for MDK-ARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system and also configure the external
|
||||
;* SRAM mounted on STM3210E-EVAL board to be used as data
|
||||
;* memory (optional, to be enabled by user)
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000400
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT ADC3_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
TIM8_BRK_IRQHandler
|
||||
TIM8_UP_IRQHandler
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
ADC3_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+346
@@ -0,0 +1,346 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_hd_vl.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x High Density Value Line Devices vector table
|
||||
;* for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system and also configure the external
|
||||
;* SRAM mounted on STM32100E-EVAL board to be used as data
|
||||
;* memory (optional, to be enabled by user)
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI-CEC
|
||||
DCD TIM12_IRQHandler ; TIM12
|
||||
DCD TIM13_IRQHandler ; TIM13
|
||||
DCD TIM14_IRQHandler ; TIM14
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
CEC_IRQHandler
|
||||
TIM12_IRQHandler
|
||||
TIM13_IRQHandler
|
||||
TIM14_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+297
@@ -0,0 +1,297 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_ld.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x Low Density Devices vector table for MDK-ARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1_2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler routine
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+304
@@ -0,0 +1,304 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_ld_vl.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x Low Density Value Line Devices vector table
|
||||
;* for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI-CEC
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
CEC_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+307
@@ -0,0 +1,307 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_md.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1_2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+315
@@ -0,0 +1,315 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_md_vl.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x Medium Density Value Line Devices vector table
|
||||
;* for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI-CEC
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
CEC_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+358
@@ -0,0 +1,358 @@
|
||||
;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f10x_xl.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V3.5.0
|
||||
;* Date : 11-March-2011
|
||||
;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system and also configure the external
|
||||
;* SRAM mounted on STM3210E-EVAL board to be used as data
|
||||
;* memory (optional, to be enabled by user)
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTCAlarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT ADC3_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTCAlarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
ADC3_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
|
||||
+8341
File diff suppressed because it is too large
Load Diff
+1095
File diff suppressed because it is too large
Load Diff
+98
@@ -0,0 +1,98 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f10x.h
|
||||
* @author MCD Application Team
|
||||
* @version V3.5.0
|
||||
* @date 11-March-2011
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
||||
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
||||
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
||||
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f10x_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef __SYSTEM_STM32F10X_H
|
||||
#define __SYSTEM_STM32F10X_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32F10x_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__SYSTEM_STM32F10X_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,243 @@
|
||||
<html>
|
||||
|
||||
<head>
|
||||
<title>CMSIS Debug Support</title>
|
||||
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
|
||||
<meta name="GENERATOR" content="Microsoft FrontPage 6.0">
|
||||
<meta name="ProgId" content="FrontPage.Editor.Document">
|
||||
<style>
|
||||
<!--
|
||||
/*-----------------------------------------------------------
|
||||
Keil Software CHM Style Sheet
|
||||
-----------------------------------------------------------*/
|
||||
body { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family:
|
||||
Verdana, Arial, 'Sans Serif' }
|
||||
a:link { color: #0000FF; text-decoration: underline }
|
||||
a:visited { color: #0000FF; text-decoration: underline }
|
||||
a:active { color: #FF0000; text-decoration: underline }
|
||||
a:hover { color: #FF0000; text-decoration: underline }
|
||||
h1 { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold;
|
||||
text-align: Center; margin-right: 3 }
|
||||
h2 { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold;
|
||||
background-color: #CCCCCC; margin-top: 24; margin-bottom: 3;
|
||||
padding: 6 }
|
||||
h3 { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color:
|
||||
#CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
|
||||
pre { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC;
|
||||
margin-left: 24; margin-right: 24 }
|
||||
ul { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
|
||||
ol { margin-top: 6pt; margin-bottom: 0 }
|
||||
li { clear: both; margin-bottom: 6pt }
|
||||
table { font-size: 100%; border-width: 0; padding: 0 }
|
||||
th { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align:
|
||||
bottom; padding-right: 6pt }
|
||||
tr { text-align: left; vertical-align: top }
|
||||
td { text-align: left; vertical-align: top; padding-right: 6pt }
|
||||
.ToolT { font-size: 8pt; color: #808080 }
|
||||
.TinyT { font-size: 8pt; text-align: Center }
|
||||
code { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier;
|
||||
line-height: 120%; font-style: normal }
|
||||
/*-----------------------------------------------------------
|
||||
Notes
|
||||
-----------------------------------------------------------*/
|
||||
p.note { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
|
||||
/*-----------------------------------------------------------
|
||||
Expanding/Contracting Divisions
|
||||
-----------------------------------------------------------*/
|
||||
#expand { text-decoration: none; margin-bottom: 3pt }
|
||||
img.expand { border-style: none; border-width: medium }
|
||||
div.expand { display: none; margin-left: 9pt; margin-top: 0 }
|
||||
/*-----------------------------------------------------------
|
||||
Where List Tags
|
||||
-----------------------------------------------------------*/
|
||||
p.wh { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
|
||||
table.wh { width: 100% }
|
||||
td.whItem { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom:
|
||||
6pt }
|
||||
td.whDesc { padding-bottom: 6pt }
|
||||
/*-----------------------------------------------------------
|
||||
Keil Table Tags
|
||||
-----------------------------------------------------------*/
|
||||
table.kt { border: 1pt solid #000000 }
|
||||
th.kt { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt;
|
||||
padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
|
||||
tr.kt { }
|
||||
td.kt { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0;
|
||||
padding-left: 6pt; padding-right: 6pt; padding-top: 2pt;
|
||||
padding-bottom: 2pt }
|
||||
/*-----------------------------------------------------------
|
||||
-----------------------------------------------------------*/
|
||||
-->
|
||||
|
||||
</style>
|
||||
</head>
|
||||
|
||||
<body>
|
||||
|
||||
<h1>CMSIS Debug Support</h1>
|
||||
|
||||
<hr>
|
||||
|
||||
<h2>Cortex-M3 ITM Debug Access</h2>
|
||||
<p>
|
||||
The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that provides together with
|
||||
the Serial Viewer Output trace capabilities for the microcontroller system. The ITM has
|
||||
32 communication channels which are able to transmit 32 / 16 / 8 bit values; two ITM
|
||||
communication channels are used by CMSIS to output the following information:
|
||||
</p>
|
||||
<ul>
|
||||
<li>ITM Channel 0: used for printf-style output via the debug interface.</li>
|
||||
<li>ITM Channel 31: is reserved for RTOS kernel awareness debugging.</li>
|
||||
</ul>
|
||||
|
||||
<h2>Debug IN / OUT functions</h2>
|
||||
<p>CMSIS provides following debug functions:</p>
|
||||
<ul>
|
||||
<li>ITM_SendChar (uses ITM channel 0)</li>
|
||||
<li>ITM_ReceiveChar (uses global variable)</li>
|
||||
<li>ITM_CheckChar (uses global variable)</li>
|
||||
</ul>
|
||||
|
||||
<h3>ITM_SendChar</h3>
|
||||
<p>
|
||||
<strong>ITM_SendChar</strong> is used to transmit a character over ITM channel 0 from
|
||||
the microcontroller system to the debug system. <br>
|
||||
Only a 8 bit value is transmitted.
|
||||
</p>
|
||||
<pre>
|
||||
static __INLINE uint32_t ITM_SendChar (uint32_t ch)
|
||||
{
|
||||
/* check if debugger connected and ITM channel enabled for tracing */
|
||||
if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) &&
|
||||
(ITM->TCR & ITM_TCR_ITMENA) &&
|
||||
(ITM->TER & (1UL << 0)) )
|
||||
{
|
||||
while (ITM->PORT[0].u32 == 0);
|
||||
ITM->PORT[0].u8 = (uint8_t)ch;
|
||||
}
|
||||
return (ch);
|
||||
}</pre>
|
||||
|
||||
<h3>ITM_ReceiveChar</h3>
|
||||
<p>
|
||||
ITM communication channel is only capable for OUT direction. For IN direction
|
||||
a globel variable is used. A simple mechansim detects if a character is received.
|
||||
The project to test need to be build with debug information.
|
||||
</p>
|
||||
|
||||
<p>
|
||||
The globale variable <strong>ITM_RxBuffer</strong> is used to transmit a 8 bit value from debug system
|
||||
to microcontroller system. <strong>ITM_RxBuffer</strong> is 32 bit wide to enshure a proper handshake.
|
||||
</p>
|
||||
<pre>
|
||||
extern volatile int ITM_RxBuffer; /* variable to receive characters */
|
||||
</pre>
|
||||
<p>
|
||||
A dedicated bit pattern is used to determin if <strong>ITM_RxBuffer</strong> is empty
|
||||
or contains a valid value.
|
||||
</p>
|
||||
<pre>
|
||||
#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /* value identifying ITM_RxBuffer is ready for next character */
|
||||
</pre>
|
||||
<p>
|
||||
<strong>ITM_ReceiveChar</strong> is used to receive a 8 bit value from the debug system. The function is nonblocking.
|
||||
It returns the received character or '-1' if no character was available.
|
||||
</p>
|
||||
<pre>
|
||||
static __INLINE int ITM_ReceiveChar (void) {
|
||||
int ch = -1; /* no character available */
|
||||
|
||||
if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
|
||||
ch = ITM_RxBuffer;
|
||||
ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
|
||||
}
|
||||
|
||||
return (ch);
|
||||
}
|
||||
</pre>
|
||||
|
||||
<h3>ITM_CheckChar</h3>
|
||||
<p>
|
||||
<strong>ITM_CheckChar</strong> is used to check if a character is received.
|
||||
</p>
|
||||
<pre>
|
||||
static __INLINE int ITM_CheckChar (void) {
|
||||
|
||||
if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
|
||||
return (0); /* no character available */
|
||||
} else {
|
||||
return (1); /* character available */
|
||||
}
|
||||
}</pre>
|
||||
|
||||
|
||||
<h2>ITM Debug Support in uVision</h2>
|
||||
<p>
|
||||
uVision uses in a debug session the <strong>Debug (printf) Viewer</strong> window to
|
||||
display the debug data.
|
||||
</p>
|
||||
<p>Direction microcontroller system -> uVision:</p>
|
||||
<ul>
|
||||
<li>
|
||||
Characters received via ITM communication channel 0 are written in a printf style
|
||||
to <strong>Debug (printf) Viewer</strong> window.
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
<p>Direction uVision -> microcontroller system:</p>
|
||||
<ul>
|
||||
<li>Check if <strong>ITM_RxBuffer</strong> variable is available (only performed once).</li>
|
||||
<li>Read character from <strong>Debug (printf) Viewer</strong> window.</li>
|
||||
<li>If <strong>ITM_RxBuffer</strong> empty write character to <strong>ITM_RxBuffer</strong>.</li>
|
||||
</ul>
|
||||
|
||||
<p class="Note">Note</p>
|
||||
<ul>
|
||||
<li><p>Current solution does not use a buffer machanism for trasmitting the characters.</p>
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
<h2>RTX Kernel awareness in uVision</h2>
|
||||
<p>
|
||||
uVision / RTX are using a simple and efficient solution for RTX Kernel awareness.
|
||||
No format overhead is necessary.<br>
|
||||
uVsion debugger decodes the RTX events via the 32 / 16 / 8 bit ITM write access
|
||||
to ITM communication channel 31.
|
||||
</p>
|
||||
|
||||
<p>Following RTX events are traced:</p>
|
||||
<ul>
|
||||
<li>Task Create / Delete event
|
||||
<ol>
|
||||
<li>32 bit access. Task start address is transmitted</li>
|
||||
<li>16 bit access. Task ID and Create/Delete flag are transmitted<br>
|
||||
High byte holds Create/Delete flag, Low byte holds TASK ID.
|
||||
</li>
|
||||
</ol>
|
||||
</li>
|
||||
<li>Task switch event
|
||||
<ol>
|
||||
<li>8 bit access. Task ID of current task is transmitted</li>
|
||||
</ol>
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
<p class="Note">Note</p>
|
||||
<ul>
|
||||
<li><p>Other RTOS information could be retrieved via memory read access in a polling mode manner.</p>
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
|
||||
<p class="MsoNormal"><span lang="EN-GB"> </span></p>
|
||||
|
||||
<hr>
|
||||
|
||||
<p class="TinyT">Copyright © KEIL - An ARM Company.<br>
|
||||
All rights reserved.<br>
|
||||
Visit our web site at <a href="http://www.keil.com">www.keil.com</a>.
|
||||
</p>
|
||||
|
||||
</body>
|
||||
|
||||
</html>
|
||||
@@ -0,0 +1,320 @@
|
||||
<html>
|
||||
|
||||
<head>
|
||||
<title>CMSIS Changes</title>
|
||||
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
|
||||
<meta name="GENERATOR" content="Microsoft FrontPage 6.0">
|
||||
<meta name="ProgId" content="FrontPage.Editor.Document">
|
||||
<style>
|
||||
<!--
|
||||
/*-----------------------------------------------------------
|
||||
Keil Software CHM Style Sheet
|
||||
-----------------------------------------------------------*/
|
||||
body { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family:
|
||||
Verdana, Arial, 'Sans Serif' }
|
||||
a:link { color: #0000FF; text-decoration: underline }
|
||||
a:visited { color: #0000FF; text-decoration: underline }
|
||||
a:active { color: #FF0000; text-decoration: underline }
|
||||
a:hover { color: #FF0000; text-decoration: underline }
|
||||
h1 { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold;
|
||||
text-align: Center; margin-right: 3 }
|
||||
h2 { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold;
|
||||
background-color: #CCCCCC; margin-top: 24; margin-bottom: 3;
|
||||
padding: 6 }
|
||||
h3 { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color:
|
||||
#CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
|
||||
pre { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC;
|
||||
margin-left: 24; margin-right: 24 }
|
||||
ul { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
|
||||
ol { margin-top: 6pt; margin-bottom: 0 }
|
||||
li { clear: both; margin-bottom: 6pt }
|
||||
table { font-size: 100%; border-width: 0; padding: 0 }
|
||||
th { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align:
|
||||
bottom; padding-right: 6pt }
|
||||
tr { text-align: left; vertical-align: top }
|
||||
td { text-align: left; vertical-align: top; padding-right: 6pt }
|
||||
.ToolT { font-size: 8pt; color: #808080 }
|
||||
.TinyT { font-size: 8pt; text-align: Center }
|
||||
code { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier;
|
||||
line-height: 120%; font-style: normal }
|
||||
/*-----------------------------------------------------------
|
||||
Notes
|
||||
-----------------------------------------------------------*/
|
||||
p.note { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
|
||||
/*-----------------------------------------------------------
|
||||
Expanding/Contracting Divisions
|
||||
-----------------------------------------------------------*/
|
||||
#expand { text-decoration: none; margin-bottom: 3pt }
|
||||
img.expand { border-style: none; border-width: medium }
|
||||
div.expand { display: none; margin-left: 9pt; margin-top: 0 }
|
||||
/*-----------------------------------------------------------
|
||||
Where List Tags
|
||||
-----------------------------------------------------------*/
|
||||
p.wh { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
|
||||
table.wh { width: 100% }
|
||||
td.whItem { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom:
|
||||
6pt }
|
||||
td.whDesc { padding-bottom: 6pt }
|
||||
/*-----------------------------------------------------------
|
||||
Keil Table Tags
|
||||
-----------------------------------------------------------*/
|
||||
table.kt { border: 1pt solid #000000 }
|
||||
th.kt { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt;
|
||||
padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
|
||||
tr.kt { }
|
||||
td.kt { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0;
|
||||
padding-left: 6pt; padding-right: 6pt; padding-top: 2pt;
|
||||
padding-bottom: 2pt }
|
||||
/*-----------------------------------------------------------
|
||||
-----------------------------------------------------------*/
|
||||
-->
|
||||
|
||||
</style>
|
||||
</head>
|
||||
|
||||
<body>
|
||||
|
||||
<h1>Changes to CMSIS version V1.20</h1>
|
||||
|
||||
<hr>
|
||||
|
||||
<h2>1. Removed CMSIS Middelware packages</h2>
|
||||
<p>
|
||||
CMSIS Middleware is on hold from ARM side until a agreement between all CMSIS partners is found.
|
||||
</p>
|
||||
|
||||
<h2>2. SystemFrequency renamed to SystemCoreClock</h2>
|
||||
<p>
|
||||
The variable name <strong>SystemCoreClock</strong> is more precise than <strong>SystemFrequency</strong>
|
||||
because the variable holds the clock value at which the core is running.
|
||||
</p>
|
||||
|
||||
<h2>3. Changed startup concept</h2>
|
||||
<p>
|
||||
The old startup concept (calling SystemInit_ExtMemCtl from startup file and calling SystemInit
|
||||
from main) has the weakness that it does not work for controllers which need a already
|
||||
configuerd clock system to configure the external memory controller.
|
||||
</p>
|
||||
|
||||
<h3>Changed startup concept</h3>
|
||||
<ul>
|
||||
<li>
|
||||
SystemInit() is called from startup file before <strong>premain</strong>.
|
||||
</li>
|
||||
<li>
|
||||
<strong>SystemInit()</strong> configures the clock system and also configures
|
||||
an existing external memory controller.
|
||||
</li>
|
||||
<li>
|
||||
<strong>SystemInit()</strong> must not use global variables.
|
||||
</li>
|
||||
<li>
|
||||
<strong>SystemCoreClock</strong> is initialized with a correct predefined value.
|
||||
</li>
|
||||
<li>
|
||||
Additional function <strong>void SystemCoreClockUpdate (void)</strong> is provided.<br>
|
||||
<strong>SystemCoreClockUpdate()</strong> updates the variable <strong>SystemCoreClock</strong>
|
||||
and must be called whenever the core clock is changed.<br>
|
||||
<strong>SystemCoreClockUpdate()</strong> evaluates the clock register settings and calculates
|
||||
the current core clock.
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
|
||||
<h2>4. Advanced Debug Functions</h2>
|
||||
<p>
|
||||
ITM communication channel is only capable for OUT direction. To allow also communication for
|
||||
IN direction a simple concept is provided.
|
||||
</p>
|
||||
<ul>
|
||||
<li>
|
||||
Global variable <strong>volatile int ITM_RxBuffer</strong> used for IN data.
|
||||
</li>
|
||||
<li>
|
||||
Function <strong>int ITM_CheckChar (void)</strong> checks if a new character is available.
|
||||
</li>
|
||||
<li>
|
||||
Function <strong>int ITM_ReceiveChar (void)</strong> retrieves the new character.
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
<p>
|
||||
For detailed explanation see file <strong>CMSIS debug support.htm</strong>.
|
||||
</p>
|
||||
|
||||
|
||||
<h2>5. Core Register Bit Definitions</h2>
|
||||
<p>
|
||||
Files core_cm3.h and core_cm0.h contain now bit definitions for Core Registers. The name for the
|
||||
defines correspond with the Cortex-M Technical Reference Manual.
|
||||
</p>
|
||||
<p>
|
||||
e.g. SysTick structure with bit definitions
|
||||
</p>
|
||||
<pre>
|
||||
/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
|
||||
memory mapped structure for SysTick
|
||||
@{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
|
||||
__IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
|
||||
__IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
|
||||
__I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
|
||||
} SysTick_Type;
|
||||
|
||||
/* SysTick Control / Status Register Definitions */
|
||||
#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
|
||||
#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
|
||||
|
||||
#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
|
||||
#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
|
||||
|
||||
#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
|
||||
#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
|
||||
|
||||
#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
|
||||
#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
|
||||
|
||||
/* SysTick Reload Register Definitions */
|
||||
#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
|
||||
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
|
||||
|
||||
/* SysTick Current Register Definitions */
|
||||
#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
|
||||
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
|
||||
|
||||
/* SysTick Calibration Register Definitions */
|
||||
#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
|
||||
#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
|
||||
|
||||
#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
|
||||
#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
|
||||
|
||||
#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
|
||||
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
|
||||
/*@}*/ /* end of group CMSIS_CM3_SysTick */</pre>
|
||||
|
||||
<h2>7. DoxyGen Tags</h2>
|
||||
<p>
|
||||
DoxyGen tags in files core_cm3.[c,h] and core_cm0.[c,h] are reworked to create proper documentation
|
||||
using DoxyGen.
|
||||
</p>
|
||||
|
||||
<h2>8. Folder Structure</h2>
|
||||
<p>
|
||||
The folder structure is changed to differentiate the single support packages.
|
||||
</p>
|
||||
|
||||
<ul>
|
||||
<li>CM0</li>
|
||||
<li>CM3
|
||||
<ul>
|
||||
<li>CoreSupport</li>
|
||||
<li>DeviceSupport</li>
|
||||
<ul>
|
||||
<li>Vendor
|
||||
<ul>
|
||||
<li>Device
|
||||
<ul>
|
||||
<li>Startup
|
||||
<ul>
|
||||
<li>Toolchain</li>
|
||||
<li>Toolchain</li>
|
||||
<li>...</li>
|
||||
</ul>
|
||||
</li>
|
||||
</ul>
|
||||
</li>
|
||||
<li>Device</li>
|
||||
<li>...</li>
|
||||
</ul>
|
||||
</li>
|
||||
<li>Vendor</li>
|
||||
<li>...</li>
|
||||
</ul>
|
||||
</li>
|
||||
<li>Example
|
||||
<ul>
|
||||
<li>Toolchain
|
||||
<ul>
|
||||
<li>Device</li>
|
||||
<li>Device</li>
|
||||
<li>...</li>
|
||||
</ul>
|
||||
</li>
|
||||
<li>Toolchain</li>
|
||||
<li>...</li>
|
||||
</ul>
|
||||
</li>
|
||||
</ul>
|
||||
</li>
|
||||
|
||||
<li>Documentation</li>
|
||||
</ul>
|
||||
|
||||
<h2>9. Open Points</h2>
|
||||
<p>
|
||||
Following points need to be clarified and solved:
|
||||
</p>
|
||||
<ul>
|
||||
<li>
|
||||
<p>
|
||||
Equivalent C and Assembler startup files.
|
||||
</p>
|
||||
<p>
|
||||
Is there a need for having C startup files although assembler startup files are
|
||||
very efficient and do not need to be changed?
|
||||
<p/>
|
||||
</li>
|
||||
<li>
|
||||
<p>
|
||||
Placing of HEAP in external RAM.
|
||||
</p>
|
||||
<p>
|
||||
It must be possible to place HEAP in external RAM if the device supports an
|
||||
external memory controller.
|
||||
</p>
|
||||
</li>
|
||||
<li>
|
||||
<p>
|
||||
Placing of STACK /HEAP.
|
||||
</p>
|
||||
<p>
|
||||
STACK should always be placed at the end of internal RAM.
|
||||
</p>
|
||||
<p>
|
||||
If HEAP is placed in internal RAM than it should be placed after RW ZI section.
|
||||
</p>
|
||||
</li>
|
||||
<li>
|
||||
<p>
|
||||
Removing core_cm3.c and core_cm0.c.
|
||||
</p>
|
||||
<p>
|
||||
On a long term the functions in core_cm3.c and core_cm0.c must be replaced with
|
||||
appropriate compiler intrinsics.
|
||||
</p>
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
|
||||
<h2>10. Limitations</h2>
|
||||
<p>
|
||||
The following limitations are not covered with the current CMSIS version:
|
||||
</p>
|
||||
<ul>
|
||||
<li>
|
||||
No <strong>C startup files</strong> for ARM toolchain are provided.
|
||||
</li>
|
||||
<li>
|
||||
No <strong>C startup files</strong> for GNU toolchain are provided.
|
||||
</li>
|
||||
<li>
|
||||
No <strong>C startup files</strong> for IAR toolchain are provided.
|
||||
</li>
|
||||
<li>
|
||||
No <strong>Tasking</strong> projects are provided yet.
|
||||
</li>
|
||||
</ul>
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
Reference in New Issue
Block a user